Optoma ZH420 Manual

Optoma ZH420 Manual

Get Optoma ZH420 PDF manuals and user guides View all Optoma ZH420 manuals
Add to My Manuals
Save this manual to your list of manuals

Optoma ZH420 manual content summary:

  • Optoma ZH420 | Manual - Page 1
    DLP® Projector User manual
  • Optoma ZH420 | Manual - Page 2
    TABLE OF CONTENTS SAFETY 4 Important Safety Instruction...4 Laser Radiation Safety Information 5 Copyright...7 Disclaimer...7 Trademark Recognition...7 FCC...7 Declaration of Conformity for EU countries 8 WEEE...8 Cleaning the Lens...8 INTRODUCTION 9 Package Overview...9 Standard accessories...9
  • Optoma ZH420 | Manual - Page 3
    ...54 ADDITIONAL INFORMATION 55 Compatible resolutions...55 Image size and projection distance 59 Projector dimensions and ceiling mount installation 63 IR remote control codes...65 Troubleshooting...67 Warning indicators...69 Specifications...70 Optoma global offices...72 English 3
  • Optoma ZH420 | Manual - Page 4
    user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Please follow all , precautions and maintenance as recommended in this user's guide. Important Safety Instruction ‡ Do not block any ventilation openings. To ensure
  • Optoma ZH420 | Manual - Page 5
    ‡ When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down. ‡ Turn off and unplug the power plug from the AC outlet before cleaning the product. ‡ Use a soft dry cloth with mild detergent to clean
  • Optoma ZH420 | Manual - Page 6
    out of the lens, can cause an unpredictable outcome such as a fire or injury to the eyes. ‡ Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser radiation exposure. ‡ Do not open or disassemble the projector as this may cause damage by the
  • Optoma ZH420 | Manual - Page 7
    a trademark of Texas Instruments. All other product names used in this manual are the properties of their respective owners and are Acknowledged. FCC This energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
  • Optoma ZH420 | Manual - Page 8
    2014/30/EU (including amendments) ‡ Low Voltage Directive 2014/35/EU ‡ RED 2014/53/EU (if product has RF function) WEEE Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please
  • Optoma ZH420 | Manual - Page 9
    for detailed information. Standard accessories Projector Remote control Power cable Power adapter  Quick start user manual Documentation Note: ‡ For access to the setup information, user manual, warranty information, and product updates - please scan the QR Code or visit the following URL
  • Optoma ZH420 | Manual - Page 10
    space, allow at least 30 cm clearance around the intake and exhaust vents. The 1080p Short Throw w/o network model does not support LAN connector. No Item 1. IR Receivers 2. Keypad 3. Zoom Lever 4. Focus Ring 5. Ventilation (outlet) 6. DC Jack No Item 7. Ventilation (inlet) 8. Tilt
  • Optoma ZH420 | Manual - Page 11
    3. RS-232 Connector 4. USB Power Out (5V 1.5A) Connector No Item 5. Audio Out Connector 6. DC Jack 7. KensingtonTM Lock Port 8. RJ-45 Connector* Note: ‡ ‡ Signal mode support varies from different model in each sales region. *1080p Short Throw w/o network model does not
  • Optoma ZH420 | Manual - Page 12
    INTRODUCTION Keypad 1 2 3 9 12 4 5 11 6 7 10 No Item 1. Power LED 2. Lamp LED 3. Temp LED 4. Information 5. Re-Sync 6. Four Directional Select Keys 98 No Item 7. IR Receiver 8. Enter 9. Keystone Correction 10. Menu 11. Source 12. Power 12 English
  • Optoma ZH420 | Manual - Page 13
    . Menu 13. Four Directional Select Keys 14. Settings/Setup Menu 15. Source Some keys may have no function for models that do not support these features. Before using the remote control for the first time, remove the transparent insulation tape. See page 19 for battery installation. The inclusion
  • Optoma ZH420 | Manual - Page 14
    SETUP AND INSTALLATION Installing the projector Your projector is designed to be installed in one of four possible positions. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a
  • Optoma ZH420 | Manual - Page 15
    SETUP AND INSTALLATION Projector installation notice ‡ 360° free orientation operation ‡ Allow at least 30 cm clearance around the exhaust vent. Minimum 100mm (3.94 inches) Minimum 300mm (11.81 inches) Minimum 300mm (11.81 inches) Minimum 100mm (3.94 inches) Minimum 100mm (3.94 inches)
  • Optoma ZH420 | Manual - Page 16
    the use of High Speed or Premium Certified HDMI cables up to 5 meters. *Only XGA, WXGA, 1080P 1.3x, 1080P 1.6x, and 1080P Short Throw models support network function. 16 English
  • Optoma ZH420 | Manual - Page 17
    SETUP AND INSTALLATION Adjusting the projector image Image height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to adjust on the underside of the projector. 2. Rotate the adjustable foot clockwise or counterclockwise to raise or
  • Optoma ZH420 | Manual - Page 18
    SETUP AND INSTALLATION Zoom and focus ‡ To adjust the image size, turn the zoom lever clockwise or counterclockwise to increase or decrease the projected image size. ‡ To adjust the focus, turn the focus ring clockwise or counterclockwise until the image is sharp and legible. 1080p 1.3x/1080p 1.6x
  • Optoma ZH420 | Manual - Page 19
    case clean and install new battery. ‡ Risk of an explosion if battery is replaced by an incorrect type. ‡ Dispose of used battery according to the instructions. Note: The inclusion of the battery for the remote control may vary depending on the region. English 19
  • Optoma ZH420 | Manual - Page 20
    SETUP AND INSTALLATION Effective range Infra-Red (IR) remote control sensor is located on the top and front sides of the projector. Ensure that the remote control is held at an angle 30 degrees perpendicular to the projector's IR remote control sensor to ensure correct functionality. The distance
  • Optoma ZH420 | Manual - Page 21
    USING THE PROJECTOR Powering on / off the projector or Powering on 1. Securely connect the power lead and signal/source cable. When connected, the Power LED will turn red. 2. Turn on the projector by pressing the button on the projector keypad or the button on the remote control. 3. A start up
  • Optoma ZH420 | Manual - Page 22
    USING THE PROJECTOR Selecting an input source Turn on the connected source that you want to display on the screen, such as computer, notebook, video player, etc. The projector will automatically detect the source. If multiple sources are connected, press the button on the projector keypad or remote
  • Optoma ZH420 | Manual - Page 23
    USING THE PROJECTOR Menu navigation and features The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. 1. To open the OSD menu, press the button on the projector keypad
  • Optoma ZH420 | Manual - Page 24
    USING THE PROJECTOR OSD Menu tree Note: The OSD menu tree items and features are subject to models and region. Optoma reserve the right to add or remove items to improve product performance without notice. Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Picture Mode Dynamic Range [for HDMI 2.0
  • Optoma ZH420 | Manual - Page 25
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Wall Color Image 3D 3D Mode 3D Sync Type 3D-2D Conversion 3D Format Reset Projection Orientation 3D Sync Invert Reset Light Source Mode Display Dynamic Black Gaming Mode Screen Type Aspect Ratio Geometric Correction V
  • Optoma ZH420 | Manual - Page 26
    USING THE PROJECTOR Main Menu Display Sub Menu Geometric Correction Digital Zoom Image Shift Reset Sub Menu 2 H Keystone Four Corner Adjustment Reset Zoom H V Reset Sub Menu 3 Test Pattern Setup Language Sub Menu 4 Values -15 ~ 15 [-30 ~ 30, for 1080p model] -5 ~ 25 -100 ~ 100 -100 ~ 100
  • Optoma ZH420 | Manual - Page 27
    800hr 1000hr No Yes Off On Off On 0 ~ 180 (1 min increments) 0 ~ 990 (30 min increments) Note: Power Mode (Standby) is available only in models that support the network function. Off On Off On Default Neutral English 27
  • Optoma ZH420 | Manual - Page 28
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Setup Input Background Color Device Reset Reset OSD Reset All Settings Auto Source Auto Input Switch HDMI Link HDMI CEC Settings Inclusive of TV Power On Link Power Off Link Audio Reset Volume Mute Reset Device ID Remote
  • Optoma ZH420 | Manual - Page 29
    USING THE PROJECTOR Main Menu Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Crestron Off (Port 41794) On Extron Off (Port 2023) On PJ Link Off (Port 4352) On Control Control AMX Device Off Discovery (Port 9131) On Off Telnet (Port 23) On Off HTTP (Port 80) On Reset Regulatory
  • Optoma ZH420 | Manual - Page 30
    USING THE PROJECTOR Image menu Image picture mode menu There are several predefined display modes that you can choose from to suit your viewing preference. Each mode has been fine-tuned by our expert colour team to ensure superior colour performance for wide range of content. ‡ Vivid: In this mode,
  • Optoma ZH420 | Manual - Page 31
    USING THE PROJECTOR Image contrast menu The contrast controls the degree of difference between the lightest and darkest parts of the picture. Image sharpness menu Adjust the sharpness of the image. Image gamma menu Set up gamma curve type. After the initial setup and fine tuning is completed,
  • Optoma ZH420 | Manual - Page 32
    projector with DLP-Link 3D solution. Please ensure that 3D glasses are in use for DLP-Link 3D content before enjoying your video. This projector supports frame sequential (page-flip) 3D via HDMI1/HDMI2 ports. To enable 3D mode, the input frame rate should be set to 60Hz only, lower or
  • Optoma ZH420 | Manual - Page 33
    Output Resolution 1080p 1080p 1080p 1080p 1080p 1080p Input Lag 17ms 8.6ms* 17ms* 33.8ms 17ms* 33.7ms* ‡ 1080p120 and 4K60 only support 1080p model. ‡ *Only supported in 1080p Short Throw w/o network,1080p 1.3x, 1080p Short Throw model, and 1080p 1.6x models. Display screen type menu Choose the
  • Optoma ZH420 | Manual - Page 34
    USING THE PROJECTOR Display aspect ratio menu Select the aspect ratio of the displayed image between the following options: ‡ 4:3: This format is for 4:3 input sources. ‡ 16:9: This format is for 16:9 input sources, like HDTV and DVD enhanced for Wide screen TV. ‡ 16:10: This format is for 16:10
  • Optoma ZH420 | Manual - Page 35
    USING THE PROJECTOR WXGA scaling table (screen type 16x10): 16 : 10 screen 4x3 16x10 LBX Native mode Auto 480i/p 576i/p 1080i/p 720p PC Scale to 1066x800. Scale to 1280x800. Scale to 1280x960, then get the central 1280x800 image to display. 1:1 mapping centered. 1:1 mapping display
  • Optoma ZH420 | Manual - Page 36
    USING THE PROJECTOR WXGA auto mapping rule (screen type 16x9): Auto 4:3 Wide Laptop SDTV HDTV Input resolution H-resolution V-resolution 640 480 800 600 1024 768 1280 1024 1400 1050 1600 1200 1280 720 1280 768 1280 800 720 576 720 480 1280 720 1920 1080 Auto/Scale
  • Optoma ZH420 | Manual - Page 37
    right borders of the image are unequal in length. This is intended for use with horizontally on-axis applications. Note: H Keystone function is not supported in XGA and WXGA models. Four Corner Adjustment This setting allows the projected image to be adjusted from each corner to make a square image
  • Optoma ZH420 | Manual - Page 38
    USING THE PROJECTOR Setup menu Setup test pattern menu Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off). Setup language menu Select the multilingual OSD menu between English, German, French, Italian, Spanish, Portuguese, Polish, Dutch, Swedish,
  • Optoma ZH420 | Manual - Page 39
    return to normal standby. ‡ Eco: Choose "Eco." to save power dissipation further < 0.5W. Note: Power Mode (Standby) is available only in models that support the network function, such as XGA, WXGA, 1080p 1.3x, 1080p Short Throw model, and 1080p 1.6x. Setup security menu Security Enable this function
  • Optoma ZH420 | Manual - Page 40
    USING THE PROJECTOR Setup startup logo menu Logo Use this function to set the desired startup screen. If changes are made, they will take effect the next time the projector is powered on. ‡ Default: The default startup screen. ‡ Neutral: Logo is not displayed on startup screen. Setup background
  • Optoma ZH420 | Manual - Page 41
    USING THE PROJECTOR Input menu Input auto source menu Choose this option to let the projector automatically find an available input source. Input auto input switch menu When HDMI input signal is detected, the projector will automatically switch the input source. Input HDMI CEC settings menu Note:
  • Optoma ZH420 | Manual - Page 42
    USING THE PROJECTOR Audio menu Audio volume menu Adjust the volume level. Audio mute menu Use this option to temporarily turn off the sound. ‡ On: Choose "On" to turn mute on. ‡ Off: Choose "Off" to turn mute off. Note: "Mute" function affects both internal and external speaker volume. Audio reset
  • Optoma ZH420 | Manual - Page 43
    0-99), and allow user control an individual projector by using RS232 command. Note: For a full list of RS232 commands, please refer to the RS232 user manual on our website. Control remote settings menu IR Function Set the IR function setting. ‡ On: Choose "On", the projector can be operated by the
  • Optoma ZH420 | Manual - Page 44
    USING THE PROJECTOR How to use web browser to control your projector How to use web browser to control your projector 1. 2. 3. Note: ‡ ‡ Turn "On" the DHCP option on projector to allow a DHCP server to automatically assign an IP address. Open the web browser in your PC and type in the projector's
  • Optoma ZH420 | Manual - Page 45
    about the various types of external devices which can be connected to the LAN / RJ45 port and remotely control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. English 45
  • Optoma ZH420 | Manual - Page 46
    United States of America, and other countries by JBMIA. The projector is supported by the specified commands of the Crestron Electronics controller and related software, projector, as well as the supported commands for these external devices, please contact the Support-Service directly. 46 English
  • Optoma ZH420 | Manual - Page 47
    USING THE PROJECTOR LAN RJ45 1. Connect an RJ45 cable to RJ45 ports on the projector and the PC (laptop). 2. On the PC (Laptop), select Start > Settings > Network & Internet. 3. In the Ethernet section, select Properties. 4. In the IP settings section, select Edit. English 47
  • Optoma ZH420 | Manual - Page 48
    USING THE PROJECTOR 5. Type in the IP address and Gateway, then select "Save". 6. Press the "Menu" button on the projector. 7. Open on projector Control > LAN. 8. Enter the following connection parameters: ± DHCP: Off ± IP Address: 192.168.0.100 ± Subnet Mask: 255.255.255.0 ± Gateway: 192.168.0.254
  • Optoma ZH420 | Manual - Page 49
    USING THE PROJECTOR The projector is setup for remote management. The LAN / RJ45 function displays as follows: Log in When you open the web page for the first time, you will see a screen like the one below. Please enter valid user password. When you open the web page after entering a valid password,
  • Optoma ZH420 | Manual - Page 50
    USING THE PROJECTOR System Status The current status of the projector is displayed.You can check projector model name, firmware version, current LAN configuration, and change the interface language if needed. The version name displayed on the web page in the diagram may differ from the actual
  • Optoma ZH420 | Manual - Page 51
    USING THE PROJECTOR Projector Control You can control the projector with this item. The items for control are described in this section. Control button: When you click a button, the corresponding function will be performed. Network Setup Set the network of the projector. English 51
  • Optoma ZH420 | Manual - Page 52
    USING THE PROJECTOR Alert Setup You can send email alerts when an error occurs. You can carry out settings for alert mail in this section. 1. Alert types: Check the type of error for which you want to send alert mail. 2. Alert mail notification: Check and perform the following settings: - SMTP
  • Optoma ZH420 | Manual - Page 53
    this projector has RS232 command control by TELNET for LAN / RJ45 interface. Quick Start-Guide for "RS232 by Telnet" ‡ Check and get the IP address on OSD of 2. Telnet port: 23 (for further details, please contact the Optoma service team). 3. Telnet utility: Windows "TELNET.exe" (console mode). 4.
  • Optoma ZH420 | Manual - Page 54
    USING THE PROJECTOR Information menu Information menu View the projector information as listed below: ‡ Regulatory ‡ Serial Number ‡ Source ‡ Color Info ‡ Light Source Hours ‡ Picture Mode ‡ Device ID ‡ Filter Usage Hours ‡ Light Source Mode ‡ FW Version 54 English
  • Optoma ZH420 | Manual - Page 55
    60/70/75/85 Mac 60 Mac 75 Mac 60 Mac 60/75 Mac 60/75 Mac 60 Mac 60 Note: (*1) 1920 x 1200 @60hz only support RB(reduced blanking). (*2) 3D timing for 3D Ready projector(STD) and True 3D projector(Option). (*3) New ERA & Data projector must have this timing WSVGA, Proscene
  • Optoma ZH420 | Manual - Page 56
    ADDITIONAL INFORMATION True 3D Video Compatibility Input timing Input resolutions HDMI 1.4a 3D Input HDMI 1.3 1280 x 720P @ 50Hz 1280 x 720P @ 60Hz 1280 x 720P @ 50Hz 1280 x 720P @ 60Hz 1920 x 1080i @ 50Hz 1920 x 1080i @ 60Hz 1920 x 1080P @ 24Hz 1920 x 1080P @ 24Hz 1920 x 1080i @ 50Hz 1920 x
  • Optoma ZH420 | Manual - Page 57
    ADDITIONAL INFORMATION EDID (Digital) XGA/WXGA B0 / B0 / Established Timing Standard Timing B0 / Detail Timing B1 / Video Mode 640 x 480 @ 60Hz 1600 x 1200 @ 60Hz Native timing: 640 x 480p @ 60Hz 640 x 480 @ 67Hz 1440 x 900 @ 60Hz XGA: 1024 x 768 @ 60Hz 720(1440) x 480i @ 60Hz 640 x 480
  • Optoma ZH420 | Manual - Page 58
    ADDITIONAL INFORMATION B0 / B0 / Established Timing Standard Timing 1080p B0 / Detail Timing B1 / Video Mode 4096 x 2160p @ 60 Hz 256:135 720 x 480p @ 60 Hz 16:9 720(1440) x 480i @ 60 Hz 16:9 720 x 576p @ 50 Hz 16:9 2880 x 480i @ 60 Hz 16:9 1440 x 480p @ 60 Hz 16:9 2880 x 576i @ 50 Hz 16:9 1440
  • Optoma ZH420 | Manual - Page 59
    ADDITIONAL INFORMATION Image size and projection distance XGA model Diagonal Length Size of (4:3) Screen 25.4 30 40 50 60 70 80 90 100 120 150 Screen Size (W x H) (m) (inch) Width Height Width Height 0.52 0.39 20.32 15.24 0.61 0.46 24.00 18.00 0.81 0.61 32.00 24.00 1.02 0.76 40.00 30.00
  • Optoma ZH420 | Manual - Page 60
    ADDITIONAL INFORMATION 1080p Short Throw w/o network model Diagonal Length Size of (16:9) Screen 24.5 30 40 50 60 70 80 90 100 120 150 180 200 250 300 306 Screen Size (W x H) (m) (inch) Width Height Width Height 0.54 0.31 21.35 12.01 0.66 0.37 26.15 14.71 0.89 0.5 34.86 19.6 1.11 0.62 43.
  • Optoma ZH420 | Manual - Page 61
    ADDITIONAL INFORMATION 1080p Short Throw model Diagonal Length Size of (16:9) Screen 36 40 50 Screen Size (W x H) (m) (inch) Width Height Width Height 0.80 0.45 31.38 17.65 0.89 0.50 34.86 19.60 1.11 0.62 43.58 24.50 Projection Distance (D) (m) (feet) Wide Tele Wide Tele 0.40 0.40 N/A
  • Optoma ZH420 | Manual - Page 62
    ADDITIONAL INFORMATION Top View Side View Distance Screen Screen (W) Projection Distance (D) Screen Screen (H) Projection Distance (D) Offset (Hd) Height Diagonal Width 62 English
  • Optoma ZH420 | Manual - Page 63
    ADDITIONAL INFORMATION Projector dimensions and ceiling mount installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following
  • Optoma ZH420 | Manual - Page 64
    ADDITIONAL INFORMATION For ceiling mounting, you could purchase a cable tie whose length is over 250mm to fix the AC adapter if needed. 1. Install the cable tie to the designated holes on the bottom of the projector. Then place the AC adapter onto its slot. Holes for Cable Tie Adapter 2. Secure
  • Optoma ZH420 | Manual - Page 65
    ADDITIONAL INFORMATION IR remote control codes Key Power Aspect ratio Source Mode Four directional select keys (Up) Four directional select keys (Left) Four directional select keys (Right) Four directional select keys (Down) Enter Settings/Setup Menu Return Menu Volume - NEC format Format 1
  • Optoma ZH420 | Manual - Page 66
    ADDITIONAL INFORMATION Key Mute Volume + Freeze Keystone AV Mute NEC format Customer Code Byte 1 Byte 2 Format 1 32 CD Format 2 32 CD Key Code Byte 3 Byte 4 52 AD Description Press to momentarily turn off / on the audio. 8C 73 Press to increase the volume. Format 1 32 CD 06 F9 Press
  • Optoma ZH420 | Manual - Page 67
    ADDITIONAL INFORMATION Troubleshooting If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center. Image problems N o image appears on-screen ‡ Ensure all the cables and power connections
  • Optoma ZH420 | Manual - Page 68
    to all controls ‡ If possible, turn off the projector, then unplug the power cord and wait at least 20 seconds before reconnecting power. Remote control problems If the remote control does not work ‡ Check the operating angle of the remote control is pointed within ±15° to the IR receiver on the
  • Optoma ZH420 | Manual - Page 69
    again. If the warning indicator lights up or flashes, please contact your nearest service center for assistance. LED lightning messages Message Standby state (Input power cord) under 45 degree C. If the problem persists in spite of the above. Please contact a service center for repair. English 69
  • Optoma ZH420 | Manual - Page 70
    ADDITIONAL INFORMATION Specifications Item ‡ Technology ‡ ‡ ‡ Native Resolution ‡ ‡ ‡ ‡ Throw ratio ‡ Lens ‡ ‡ F-stop ‡ ‡ ‡ Focal length ‡ Offset ‡ Zoom range ‡ ‡ ‡ ‡ ‡ ‡ Image size ‡ ‡ ‡ Projection distance ‡ Description XGA: Texas Instrument DMD, 0.55" S450 DMD WXGA:
  • Optoma ZH420 | Manual - Page 71
    ADDITIONAL INFORMATION Item I/Os Colour Scan rate Speaker Power consumption Input current Installation orientations Dimensions (W x D x H) Weight Environmental Description ‡ HDMI 1 (HDMI 1.4b [XGA/WXGA model] / HDMI 2.0 [1080p model]) ‡ HDMI 2 (HDCP 2.0 [XGA/WXGA model] / HDCP 2.2 [1080p model]) ‡
  • Optoma ZH420 | Manual - Page 72
    ADDITIONAL INFORMATION Optoma global offices For service or support, please contact your local office. USA Optoma Technology, Inc. 47697 Westinghouse Drive. Fremont, Ca 94539 Canada Optoma Technology, Inc. 47697 Westinghouse Drive. Fremont, Ca 94539
  • Optoma ZH420 | Manual - Page 73
    www.optoma.com
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
DLP
®
Projector
User manual