Optoma ZH420 Manual - Page 41
Input menu, Input auto source menu, Input auto input switch menu, Input HDMI CEC settings menu
View all Optoma ZH420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
USING THE PROJECTOR Input menu Input auto source menu Choose this option to let the projector automatically find an available input source. Input auto input switch menu When HDMI input signal is detected, the projector will automatically switch the input source. Input HDMI CEC settings menu Note: When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. HDMI Amplifier HDMI DVD Player HDMI Link Enable/disable the HDMI Link function. Inclusive of TV If the settings is set to "Yes" then the power on and power off link options are available. Power On Link CEC power on command. Mutual: Both projector and CEC device will be turned on simultaneously. PJ Device: The CEC device will be turned on only after the projector is switched on. Device PJ: The projector will be switched on only after the CEC device is turned on. Power Off Link Enable this function to let both HDMI Link and projector to be automatically turned off at the same time. Input reset menu Return the factory default settings for input settings. English 41