Optoma ZH500UST ZU500UST_ZH500UST_UM
Optoma ZH500UST Manual
 |
View all Optoma ZH500UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Optoma ZH500UST manual content summary:
- Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 1
DLP® Projector User manual - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 2
10 Remote Control 11 Installation 12 Connecting the Projector 12 Connect to Computer/Notebook......... 12 Connect to Video Sources 13 Powering the Projector On / Off.........14 Powering On the Projector 14 Powering Off the Projector 15 Warning Indicator 15 Adjusting the Projected Image - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 3
REFER SERVICING TO QUALIFIED PERSONNEL ONLY. Class B emissions limits This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Important Safety Instruction 1. Do not block any ventilation openings. To ensure reliable operation of the projector - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 4
such as a fire or injury to the eyes. • Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser radiation exposure. • Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation. • Do not stare into - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 5
Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user's guide. ▀■ Warning- Do not look into the projector's lens when the lamp is on. The bright light may hurt and damage your eyes. ▀■ Warning- To reduce the risk of fire or electric shock, - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 6
solvents to clean the unit. Do not clean the lens during full operation, otherwise it will cause coating loss or scratches on the lens surface. Optoma is entitled to reject such warranty. Use under the following conditions: - In extremely hot, cold or humid environments. Sea level to 6000 feet - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 7
box. If something is missing, please contact your nearest customer service center. Standard Accessories Power Enter Menu Exit Zoom+ Auto Reset Projector Power Cord Remote Optional accessories vary depending on model, specification and region. Warranty Card* Basic User Manual - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 8
Introduction Product Overview Main Unit 1 5 2 4 9 The interface is subject to model's specifications. 8 Do not block projector in/out air vents and keep a minimum 30cm distance. 7 1. Control Panel 2. Focus Switch 3. Ventilation (inlet) 4. IR Receiver 5. Ventilation (outlet) English 8 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 9
Introduction Control Panel 1 2 3 4 5 8 6 9 7 1. Power LED 2. Enter 3. Temp LED 4. Lamp LED 5. Menu 6. Input 7. Four Directional Select Keys 8. Power/Standby button 9. IR Receiver 9 English - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 10
Connections 1 2 3 4 56 7 8 9 10 11 12 13 14 15 16 17 The interface is subject to model's specifications. Monitor loop through only support in VGA1In/YPbPr. 1. VGA1-In/YPbPr Connector (PC Analog Signal/Component Video Input/HDTV/YPbPr) 2. HDMI2 Input Connector 3. HDMI1 Input Connector - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 11
Remote Control Introduction 1 2 Power 5 6 9 10 Some keys may have 14 not function 15 for models which do not support these 16 features. 18 20 Enter Menu Exit Zoom+ Auto Reset Input Keystone Zoom- Volume Blank Image Aspect VGA1 Freeze HDMI1 VGA2 HDMI2 1. Infrared - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 12
Installation Connecting the Projector Connect to Computer/Notebook DVD Player, Set-top Box, HDTV receiver MOLEX Router / Network Switch 5 1 R E62405SP Due to the difference in applications for each country, - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 13
Installation Connect to Video Sources DVD Player, Set-top Box, HDTV receiver 1 2 3 4 5 R E62405SP Due to the difference in applications for each country, some regions may have different accessories. (*) Optional accessory Composite Video Output 6 8 7 Microphone Audio Output 1 15-Pin - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 14
language and power saving mode. 3. Turn on and connect the source that you want to display on the screen (computer, notebook, video player, etc). The projector will detect the source automatically. If not, push menu button and go to "OPTIONS". Make sure that the "Source Lock" has been set to "Off - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 15
When the warning indicators (see below) come on, Contact the the projector will automatically shutdown: nearest service "LAMP" LED indicator is lit red and if "POWER/STANDBY" center if the indicator flashes amber. projector displays these symptoms. "TEMP" LED indicator is lit red, this - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 16
for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector. 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. Repeat with the remaining feet as needed. Tilt-Adjustment Feet Tilt-Adjustment Ring - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 17
image, slide the focus switch to left/right until the image is clear. 1080p series: The projector will focus at distances (Lens to wall) from 1.654 to 2.205 feet (0.504 to 0.672 meters) WUXGA series: The projector will focus at distances (lens to wall) from 1.644 to 2.198 feet (0.501 to 0.670 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 18
Installation Adjusting Projection Image Size (Diagonal) 1080p series: Projection Image Size from 90" to 120" (2.286 to 3.048 meters) WUXGA series: Projection Image Size from 93" to 123" (2.362 to 3.124 meters) M4 screws holes Image center Screen Floor English 18 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 19
wall plate (O) in mm Distance from top of image to top of interface boss (O1) in mm Distance from top of image to top of projector (O2) in mm 90 2286 1992 1121 504 224 34 379 242 363 287 267 91 2311 2015 1133 510 227 34 385 248 366 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 20
wall plate (O) in mm Distance from top of image to top of interface boss (O1) in mm Distance from top of image to top of projector (O2) in mm 92 2337 1982 1239 501 211 37 376 239 350 274 254 93 2362 2003 1252 507 213 38 382 245 352 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 21
Installation Screen Table Image center 21 English - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 22
installation measurement chart Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm 2286 1992 1121 242 2311 2015 1133 248 2337 2037 1146 253 2362 2059 1158 259 2388 2081 1171 265 2413 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 23
installation measurement chart Diagonal image size (S) in mm Image width (W) in mm Image height (H) in mm Distance from surface of whiteboard to back of projector (T1) in mm 2337 1982 1239 239 2362 2003 1252 245 2388 2025 1265 250 2413 2046 1279 256 2438 2068 1292 261 2464 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 24
User Controls Control Panel & Remote Control Control Panel Using the Control Panel POWER Refer to the "Power On/Off the Projector" section on pages 14-15. Enter Press "Enter" to confirm your item selection. INPUT Press "INPUT" to select an input signal. MENU Press "MENU" to - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 25
display. Reset Return the adjustments and settings to the factory default values. (except for lamp counter) Zoom out Zoom out the projector display. Enter Confirm your item selection. Input Auto Four Directional Select Keys Keystone +/Volume +/- Aspect ratio Menu Press "Input" to select - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 26
User Controls Power Enter Menu Exit Zoom+ Auto Reset Input Keystone Zoom- Volume Blank Image Aspect VGA1 Freeze HDMI1 VGA2 HDMI2 Using the Remote Control VGA1 Press "VGA1" to choose VGA IN 1 connector. Blank screen Momentarily turns off/on the audio and video. HDMI1 HDMI2 Press - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 27
User Controls IR Remote codes key legend Power Up Left Enter Right Down Menu Zoom+ Exit Auto Reset Input ZoomKeystone+ Keystone VolumeVolume+ Blank/1 Image/2 Aspect3 VGA1 /4 Freeze/5 HDMI1/6 VGA2 /7 HDMI2 /8 S-Video /9 Custom Code NEC_CODE Byte1 Byte2 Byte3 FF FF E8 FF FF E7 FF FF E6 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 28
User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. Structure Note: Please note that the on- - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 29
User Controls Main Menu Tree 1st level 2nd level Language Setting menu Menu Location Close Caption VGA Out (Standby) VGA 2 (Function) LAN (Standby) Test Pattern Direct Power on Signal Power on Reset Speaker Line out Microphone Volume Menu Mute Volume Microphone Volume 3rd level Submenu for 18 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 30
level Logo Logo Capture Auto Source Input Auto Power Off (min) Option Menu SSI Settings 3D Menu LAN Menu High Attitude Filter Remind(Hour) Information Projector ID Digital Signage 3D 3D Invert 3D Format 1080P@24 Status DHCP IP Address Subnet Mask Gateway DNS Store MAC Address Group Name - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 31
User Controls How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Projector Keypad. 2 When OSD is displayed, use the ▲▼ keys to select any item in the main menu. While making a selection on a particular page, press the ► or " - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 32
User Controls Picture Color Mode There are many factory presets optimized for various types of images. Use the ◄ or ► button to select the item. ¾¾Bright: For brightness optimization. ¾¾PC: For meeting presentation. ¾¾Movie: For playing video content. ¾¾Blending: Tone for stitching. ¾¾Game: For game - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 33
User Controls Sharpness Adjust the sharpness of the image. ¾¾Press the ◄ button to decrease the sharpness. ¾¾Press the ► button to increase the sharpness. Saturation Adjust a video image from black and white to fully saturated color. ¾¾Press the ◄ button to decrease the amount of saturation in the - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 34
User Controls Screen Aspect Ratio ¾¾Auto: Keep the image with original width-height ratio and maximize the image to fit native horizontal or vertical pixels. ¾¾4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. ¾¾16:9: The image will be scaled to fit the width of the - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 35
User Controls Digital Zoom ¾¾Press the ◄ button to reduce the size of an image. ¾¾Press the ► button to magnify an image on the projection screen. Geometric Correction ¾¾Use keystone or 4 corner adjustment features to get perfect, rectangular images. ¾¾V. Keystone: Adjust image distortion vertically - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 36
User Controls Size Press the right button and left button to adjust color bar and the value of number Image Shift Press the right button and left button to adjust color bar and the value of number English 36 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 37
) ¾¾Input: Choose "Input" to let the VGA port works as a VGA input function. ¾¾Output: Choose "Output" to enable the VGA Out function once the projector is powered on. LAN (Standby) Choose "On" to enable LAN connection. Choose "Off" to disable LAN connection. Test Pattern Display a test pattern. 37 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 38
or on the remote control. Signal Power On Select the "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected, without pressing the "Power" key on the projector Keypad or on the remote control. Reset Choose "Yes" to return the parameters on all menus to - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 39
User Controls Volume Speaker ¾¾Choose "On" to enable the speaker. ¾¾Choose "Off" to disable the speaker. Line out ¾¾Choose "On" to enable the line out function. ¾¾Choose "Off" to disable the line out function. Microphone ¾¾Choose "On" to enable the microphone. ¾¾Choose "Off" to disable the - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 40
Controls Option Logo Use this function to set the desired startup screen. If changes are made they will take effect the next time the projector is powered on. ¾¾Default: The default startup screen. ¾¾User: Use stored picture from "Logo Capture" function. Logo Capture Press ► button to capture an - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 41
ECO mode. ¾¾Press enter to Power Mode. High Altitude ¾¾On: The built-in fans run at high speed. Select this option when using the projector at altitudes above 2500 feet/762 meters or higher. ¾¾Off: The built-in fans automatically run at a variable speed according to the internal temperature. Filter - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 42
User Controls Digital Signage ¾¾IT's an auto playback function for media. ¾¾Create a folder named ''signage'' in your USB and insert into USB port. ¾¾Choose ''On'' and restart to active the function to play the files in your signage folder automatically. ¾¾Choose ''Off'' to disable the function. - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 43
User Controls 3D 3D ¾¾Auto: When a HDMI 1.4a 3D timing identification signal is detected, the 3D image is selected automatically. ¾¾Choose "On" to enable 3D function. ¾¾Choose "Auto" to detected 3D signal automatically. 3D Invert If you see a discrete or overlapping image while wearing DLP 3D - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 44
status. DHCP Configure the DHCP settings. ¾¾On: Choose "On" to let the projector to obtain an IP address automatically from your network. ¾¾Off: Choose "Off" to assign IP, Subnet Mask, Gateway, and DNS configuration manually. IP Address Display an IP address. Subnet Mask Display the subnet mask - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 45
User Controls Group Name Display the group name. Projector Name Display the projector name Location Display the projector location. Contact Display the contact information. 45 English - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 46
to use web browser to control your projector 1. Turn on DHCP to allow a DHCP server to automatically assign an IP, or manually enter the required network information. 4. Based 15 15 (N/A) 15 15 When you used the projector IP address, you will can not link to your service server. English 46 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 47
User Controls When making a direct connection from your computer to the projector Step 1: Find an IP Address (192.168.0.100) from LAN function of projector. Step 2: Select apply and press "Enter" button to submit function or press "menu" key to exit. Step 3: To open Network Connections, click - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 48
Ethernet network (more are possible, the number depends on the combination of IP ID and IP address). Crestron RoomView monitors each projector, including projector's online status, system power, lamp life, network setting and hardware faults, plus any custom attribute as defined by the Administrator - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 49
3. Edit Attribute User Controls 4. Edit Event For further information, please visit: http://www.crestron.com & www.crestron.com/getroomview. 49 English - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 50
Cleaning the Optional Dust Filter We recommend you clean the dust filter every 500 hours of operation, or more often if you are using the projector in a dusty environment. When the warning message appears on the screen, do the following to clean the air filter: The optional dust filter should be - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 51
Appendices Compatibility Modes VGA Analog a. PC signal Modes Resolution V. Frequency [Hz] H. Frequency [Hz] 640x480 60 31.5 640x480 67 35.0 640x480 72 37.9 VGA 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 IBM 720x400 70 31.5 800x600 56 35.1 800x600 60 37.9 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 52
Appendices b. Extended wide timing Modes Resolution V. Frequency [Hz] H. Frequency [Hz] WUXGA 1920x1200 60 74 1280x720 60 44.8 1280x800 60 49.6 WXGA 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 c. Component signal Modes Resolution V. Frequency [Hz] H. Frequency - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 53
Appendices HDMI Digital a. PC signal Modes VGA IBM SVGA Apple, MAC II XGA Apple, MAC II SXGA QuadVGA SXGA+ UXGA Resolution 640x480 640x480 640x480 640x480 640x480 640x480 720x400 800x600 800x600 800x600 800x600 800x600 800x600 832x624 1024x768 1024x768 1024x768 1024x768 1024x768 1152x870 - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 54
Appendices English 54 b. Extended wide timing Modes Resolution V. Frequency [Hz] H. Frequency [Hz] WUXGA 1920x1200 60 74 1280x720 60 44.8 1280x800 60 49.6 WXGA 1366x768 60 47.7 1440x900 60 59.9 WSXGA+ 1680x1050 60 65.3 c. Video signal Modes Resolution V. Frequency [Hz] H. - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 55
& Safety Notices This appendix lists the general notices of your projector. FCC notice This device has been tested and found to radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 56
2004/108/EC (including amendments) • Low Voltage Directive 2006/95/EC • R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 57
Appendices Ceiling Mount Installation 1. To prevent damage to your projector, please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the following specifications: Screw type: M4*3 Minimum - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 58
For service or support, please contact your local office. USA 47697 Westinghouse Drive Fremont, CA 94539, USA www.optomausa.com Canada 47697 Westinghouse Drive Fremont, CA 94539, USA www.optomausa.com 888-289-6786 510-897-8601 [email protected] 888-289-6786 510-897-8601 [email protected] - Optoma ZH500UST | ZU500UST_ZH500UST_UM - Page 59
www.optoma.com
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
 |
 |
DLP
®
Projector
User manual