Optoma ZH500UST ZU500UST_ZH500UST_UM - Page 43
Optoma ZH500UST Manual
View all Optoma ZH500UST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
User Controls 3D 3D ¾¾Auto: When a HDMI 1.4a 3D timing identification signal is detected, the 3D image is selected automatically. ¾¾Choose "On" to enable 3D function. ¾¾Choose "Auto" to detected 3D signal automatically. 3D Invert If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute "Invert" to get best match of left/ right image sequence to get the correct image. 3D Format Use this feature to select the 3D format. Options are: "Frame Packing", "Side-by-Side (Half)", "Top and Bottom", "Frame Sequential", and "Field Sequential". 1080p@24 Use this feature to select 96 or 144Hz refresh rate as using 3D glasses in the1080p @ 24 frame packing. 43 English
43
English
User Controls
3D
3D
¾
Auto: When a HDMI 1.4a 3D timing identification signal is
detected, the 3D image is selected automatically.
¾
Choose “On” to enable 3D function.
¾
Choose “Auto” to detected 3D signal automatically.
3D Invert
If you see a discrete or overlapping image while wearing DLP 3D
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame
Packing”, “Side-by-Side (Half)”, “Top and Bottom”, “Frame
Sequential”, and “Field Sequential”.
1080p@24
Use this feature to select 96 or 144Hz refresh rate as using 3D
glasses in the1080p @ 24 frame packing.