Optoma ZW350e Manual - Page 35
Display geometric correction menu, Display digital zoom menu, Display image shift menu
View all Optoma ZW350e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
USING THE PROJECTOR Display geometric correction menu Auto Keystone Correct keystone digitally to fit the projected image on the area on which you are projecting. Note: The image size will reduce slightly when adjusting the horizontal and vertical keystone. When the Auto Keystone is used, the Four Corner Adjustment function will be disabled. V Keystone Adjust image distortion vertically and make a squarer image. Vertical keystone is used to correct a keystoned image shape in which the top and bottom are slanted to one of the sides. This is intended when for use with vertically on-axis applications. H Keystone Adjust image distortion horizontally and make a squarer image. Horizontal keystone is used to correct a keystoned image shape in which the left and right borders of the image are unequal in length. This is intended for use with horizontally on-axis applications. Four Corner Adjustment This setting allows the projected image to be adjusted from each corner to make a square image when the projection surface is not level. Reset Return the factory default setting for geometric correction settings. Display digital zoom menu Use to reduce or magnify an image on the projection screen. Digital Zoom is not the same as optical zoom and an result in degradation of image quality. Note: Zoom settings are retained on power cycle of the projector. Display image shift menu Adjust the projected image position horizontally (H) or vertically (V). Display reset menu Return the factory default settings for display settings. English 35