Oreck DTX1400 Owners Guide - Page 6
etting, eady for, perating, nstructions - canister vacuum
View all Oreck DTX1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ENGLISH DTX 1400B Getting Ready for Use Insert power handle into telescopic wand until button locks. Insert small end of telescopic wand into either standard nozzle or accessory tools. To unlock the wand, step on the release button located on the power nozzle. Gently lean wand back for vacuum use. Extend telescopic wand by holding telecscopic length adjustment and pulling power handle. Operating Instructions Polarized Plug Notice This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the purpose of the polarized plug. Note: Hose must be connected for unit to operate. Pull plug from unit and insert into wall outlet. TO ASSEMBLE TELESCOPIC WAND WITH STANDARD NOZZLE OR ACCESSORIES. Connect the hose by firmly inserting end of hose into canister intake opening until it clicks. To disconnect hose, turn hose lock on canister intake to unlock hose and remove. Insert power handle into larger end of telescopic wand (while holding down button lock, firmly push power handle into wand until seated). Press the On/Off pedal located at the rear of the canister to turn on. Turn handle switch to ( l ) position for unit only or ( ll ) position for unit and power nozzle. The On/Off pedal on canister must be On for ( ll ) ( l ) the handle switch to operate. 6