Oreck Quest Compact Owners Guide - Page 12

Troubleshooting ! WARNING! Unplug cord from electrical outlet before servicing. SAVE SERVICE CALLS...CHECK THESE FIRST: • Is the disposable filter dust bag full? • Are pores of filter dust bag clogged with powder or line dust? • Is anything clogging the hose, wands, power nozzle & accessories? Problem Cleaner will not run Possible Source Not plugged in properly. Areas to Check Be sure cleaner is firmly plugged into wall outlet. No electricity in wall outlet. Check electrical source­-fuse or circuit breaker. Hose not connected Connect hose. to unit. Cleaner does Filter bag is full. not pick up Replace filter bag. See "Replacing Disposable Filter Bag". Motor Filter is blocked. Clean and/or replace filter. See "Cleaning/ Replacing the Motor Filters". Hose, wand or accessories are clogged. Clear obstruction. Suction control on Close suction control. handle is open. ALL OTHER SERVICING SHOULD BE DONE BY AN ORECK AUTHORIZED SERVICE CENTER. Customer Service U.S.: 1-800-989-3535 Canada: 1-888-676-7325 Whenever calling, please be sure to have your model number from data label. 12