Oreck Quest Compact Owners Guide - Page 5
Save These, Instructions
View all Oreck Quest Compact manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
• Do not pull or carry the vacuum by the cord • Do not use the cord as a handle • Do not unplug the vacuum by pulling on the cord • Do not close a door on the cord • Do not pull the cord around sharp edges or corners • Keep the cord away from heated surfaces • Do not run the vacuum or other appliance over the cord A damaged cord or plug may cause a spark, shock and fire. Always grasp the plug, not the cord, when unplugging the vacuum. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard. Always check the cord and plug before use. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center or call customer service at: U.S.: 1-800-989-3535 Canada: 1-888-676-7325. • Do not use the machine without a motor protection filter installed If abnormal noise, smell, smoke or any other failure or breakage is found during the operation, you should turn off the switch and unplug it. Then contact your service center for repair. Do not attempt to repair by yourself. Using the vacuum with wet hands and on wet surfaces may result in unexpected shock, slippage and personal injury. Do not handle the plug or appliance with wet hands or on wet surfaces. Vacuuming burning or smoking objects, flammable or combustible liquids and toxic material may result in a fire and personal injury. Do not vacuum burning or smoking objects, flammable or combustible liquids. Unplugging the vacuum while the controls are ON may cause sparking and fire. Turn OFF all controls before unplugging. Do not leave appliance unattended when plugged in. Unplug from outlet when not in use and before servicing. SAVE THESE INSTRUCTIONS Residential Use Only