Panasonic ACC-195679 ECOi VRF Systems Catalog - Page 9

8ft New ECOi EXTM Remote ECONAVI sensor allows optimum energy operation Pillars, walls, cabinets and other fittings obstruct the sensor, reducing the area of detection and lowering the energy-saving effect. Taking into consideration blind spots, ECONAVI enables the optimum layout for sensors in any office. Wide detection area 1m 3m 5m 7m -60° -40° -20° 0° 60° 40° 20° Wide 120° Detection area Approx 3ft Dead Zone 20ft A sensor is remotely set to maximize the detection area. Installation flexibility, ready for indoor unit replacement and layout changes. Detection of activity levels enables precise power saving. Presence or absence of people at their desks and the level of activity in the office are detected in real time. Set temperature is automatically adjusted to optimize the lower power consumption. In the morning Thorough cooling during high levels of activity In the afternoon Reduced cooling fewer people are present At night Automatic Thermo O depending on conditions at end of day* Human activity and presence detection Activity detection HIGHER ACTIVITY LOWER ACTIVITY Cooling Set Temp. +/-0.0°F Cooling Set Temp. +1.8°F Heating Set Temp. -1.8°F Every 2 min Heating Set Temp. +/-0 °F Every 2 min Absence detection After 20 mins absence After 3 hours absence Cooling Set Temp. +3.6°F Cooling Thermo OFF* Heating Set Temp. -3.6°F Heating Thermo OFF* After 3 hours the setting can change to Stop or Temperature Shift *Depending on conditions, the setting can change to Switch Off After 3 Hours, Thermo Off or Temperature Shift. 9