Panasonic AG-HMR10 Operating Instructions

Panasonic AG-HMR10 Manual

Get Panasonic AG-HMR10 PDF manuals and user guides View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic AG-HMR10 manual content summary:

  • Panasonic AG-HMR10 | Operating Instructions - Page 1
    . For details, see page 7. Operating Instructions Memory Card Portable Recorder Model No. "().31 Model No. "().3& Recording Playback Editing Displays Menu Reference Before operating this product, please read the instructions carefully and save this manual for future use. S0809S0
  • Panasonic AG-HMR10 | Operating Instructions - Page 2
    is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the keep memory cards out of the reach of babies and small children. CAUTION: The mains plug of the power supply cord shall remain readily operable. The
  • Panasonic AG-HMR10 | Operating Instructions - Page 3
    not operate normally, or has been dropped. Portable Recorder The rating plate is on the backside of the unit. AC Adapter The rating plate is on the underside of the AC Adapter. Disconnect the AC mains plug from the AC mains socket when not in use. Recommendation for Use of Genuine Panasonic Battery
  • Panasonic AG-HMR10 | Operating Instructions - Page 4
    Read this first! (continued) For AG-HMR10E indicates safety information. Caution for AC Mains Lead FOR YOUR SAFETY is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. How to replace the fuse 1. Open the fuse compartment with a screwdriver. 2. Replace the fuse
  • Panasonic AG-HMR10 | Operating Instructions - Page 5
    Number: AG-HMR10P Trade Name: Panasonic Responsible Party: Panasonic Corporation of North America One Panasonic Way, Secaucus, NJ07094 Support contact: Panasonic Broadcast & Television Systems Company 1-800-524-1448 This device complies with Part 15 of the FCC Rules. Operation is subject
  • Panasonic AG-HMR10 | Operating Instructions - Page 6
    USER OF THE APPARATUS 1. Applicable standards and operating environment (AG-HMR10E high-frequency applications, for SDI (Serial Digital Interface). cables If your apparatus supports AES/EBU serial digital attached on cable(s) following instructions in this manual. 3. Performance level The
  • Panasonic AG-HMR10 | Operating Instructions - Page 7
    . EEE Yönetmeliğine Uygundur. EEE Complies with Directive of Turkey. AVCCAM 3 Year Warranty Repair Program*1 Thank you for purchasing this Panasonic AVCCAM device. Register as a user for this device to receive a special service warranty up to three years of free warranty repairs. Customers who
  • Panasonic AG-HMR10 | Operating Instructions - Page 8
    portable recorder. References • References are shown as (Page 00). Terminology • Both SD Memory Cards and SDHC Memory Cards are referred to as "SD Memory Cards" in these operating instructions. • Video data created in one recording operation is called a "clip". • The optional compact camera head (AG
  • Panasonic AG-HMR10 | Operating Instructions - Page 9
    SD Memory Card. In addition, operations for starting or stopping recording on the portable recorder can be performed from some types of camera-recorder. (When SDI input is selected.) (For details on the compatible devices, see page 85.) AG-HMR10 (portable recorder) Camera recorder HD-SDI signal
  • Panasonic AG-HMR10 | Operating Instructions - Page 10
    LCD monitor (Page 58) Content (video/audio) that is shot with an AVCCAM camera-recorder and recorded onto an SD Memory Card can be played back on-the-spot. AVCCAM camera-recorder AG-HMR10 (portable recorder) SD Memory Card 32 4 Outputting to an external monitor for playback (Page 70) Content
  • Panasonic AG-HMR10 | Operating Instructions - Page 11
    SETUP] setup menu. • Using the setup menus (Page 29) Camera-recorder AG-HMR10 (portable recorder) External device, such as a recorder HD-SDI input signal HD-SDI output signal • The HD-SDI input signal is output unchanged. • Use when recording or editing is required on the output device. • In
  • Panasonic AG-HMR10 | Operating Instructions - Page 12
    (continued) 7 Example of system configuration for CAM mode AG-HCK10G camera head (optional) Camera cable (optional) AG-HMR10 (portable recorder) External monitor HD-SDI output signal • Frame sequence information is not output. • S-VITC/UMID information is not output. • Use when performing
  • Panasonic AG-HMR10 | Operating Instructions - Page 13
    Card recording times 35 Recording Recording onto an SD Memory Card (REC mode 36 Performing HD-SDI input recording (SDI mode 36 Shooting and recording with a camera (CAM mode 37 Setting the time code 39 Setting the time code 39 Specifying the time code (TC PRESET).......... 39 Setting user
  • Panasonic AG-HMR10 | Operating Instructions - Page 14
    89 PLAY SETUP 90 THUMBNAIL SETUP 90 OPERATION 91 OTHER FUNCTIONS 91 Reference Troubleshooting 94 Updating the portable recorder 98 Cleaning 98 Storage Precautions 98 Recording format list 99 How to handle data recorded on SD Memory Card 100 Specifications 101 Index 103 Displays Screen
  • Panasonic AG-HMR10 | Operating Instructions - Page 15
    recordings. • Please understand that Panasonic makes no compensation for your recordings in cases where images and/or sound were not recorded as you intended due to problems with the camera-recorder or SD/SDHC Memory Cards holes at the sides of the portable recorder. When using the screws, do not
  • Panasonic AG-HMR10 | Operating Instructions - Page 16
    GB RP-SDV32G RP-SDW32G • Please see our support page at the following website for the latest information not included in these operating instructions. https://eww.pavc.panasonic.co.jp/pro-av/ • This product is compatible with SD Memory Cards formatted under the SD-standard FAT12 and FAT16 formats
  • Panasonic AG-HMR10 | Operating Instructions - Page 17
    with SD Memory Cards. (Always check the relevant product's operating instructions when using SDHC Memory Cards with other devices.) When cards of SD speed class 4 or above are recommended for the SD-compatible devices, use of such cards will ensure stable recording operations. SDHC-compatible
  • Panasonic AG-HMR10 | Operating Instructions - Page 18
    cause the unit or a card to malfunction (and may result in irreparable damage). The portable recorder should be used as far as possible from sources of magnetism and electromagnetism (cell phones, microwave ovens, TVs, game machines, etc.). • If the portable recorder is operated on top of or close
  • Panasonic AG-HMR10 | Operating Instructions - Page 19
    dropping. • Electrical noise, static electricity and failure of the portable recorder or SD Memory Card can result in damage or loss of data on the SD Memory Card. • If used for a long period of time, the portable recorder surface and SD Memory Card will become somewhat hot, but this is not a sign
  • Panasonic AG-HMR10 | Operating Instructions - Page 20
    AC Adapter AC power supply cables AG-HMR10P AG-HMR10E (For the U.K.) DC cable CD-ROM AG-HMR10E (For areas other than the to accessory battery) • Compact camera head for AG-HMR10 AG-HCK10G (The camera head option cable is required for connecting to the AG-HMR10.) Image sensor 1/4.1-inch, MOS
  • Panasonic AG-HMR10 | Operating Instructions - Page 21
    , 47, 68) FF button (Pages 29, 44, 58) Indicated by in the operation descriptions. USER button (Pages 41, 44) MODE button (Pages 28, 58) STOP button (Pages 29, 44, 58) Indicated by in the operation descriptions. ■ Rear ■ Side Slide stoppers Slide stoppers Multipurpose screw holes (Page 15) Built
  • Panasonic AG-HMR10 | Operating Instructions - Page 22
    and system parts Battery release button (Page 25) CAMERA terminal (Page 37) Battery compartment (Page 25) CAMERA terminal cover SD card cover (Page 33) SD Memory Card access lamp (Page 27) SD Memory Card slot (Page 33) Card slot cover (Page 33) Card slot cover open button (Page 33) Terminal
  • Panasonic AG-HMR10 | Operating Instructions - Page 23
    of parts Power sources Charging The battery does not come ready charged when the portable recorder is purchased. Charge the battery before use. It is recommended that you keep one plug, and power outlet may differ from those shown in these operating instructions. (Continued on the next page) 23
  • Panasonic AG-HMR10 | Operating Instructions - Page 24
    .) mAh Approx. 170 minutes SDI recording (SDI mode): Approx. 170 minutes Recording with AG-HCK10G connected (CAM mode): Approx. 70 minutes or charged. The portable recorder itself also becomes hot during use. • The recordable time reduces if you repeatedly start and stop recording. • The battery
  • Panasonic AG-HMR10 | Operating Instructions - Page 25
    Preparation Panasonic VW-VBG260 battery may be used with this product. POWER lamp Using the AC adapter Installation 1 Connect the DC cable to the AC adapter. 2 Plug the AC power supply cable into the power outlet. 3 Insert the DC cable plate into the battery compartment of the portable recorder
  • Panasonic AG-HMR10 | Operating Instructions - Page 26
    when the AG- HCK10G camera head (optional) is connected) • Power-saving mode In line with the [POWER SAVE] setting in the [OTHER FUNCTIONS] setup menu, the following will apply if no designated operations∗ are performed for approximately 5 minutes during recording standby (when an SD Memory Card has
  • Panasonic AG-HMR10 | Operating Instructions - Page 27
    is not operating correctly • Problem with the focus function • Camera cable is disconnected Tally lamp REC/ PAUSE REC/ PAUSE AUDIO MON/ADV SD Memory Card access lamp The SD Memory Card access lamp lights as follows depending on the access condition of the SD Memory Card in the portable recorder
  • Panasonic AG-HMR10 | Operating Instructions - Page 28
    -SDI output, for recording onto the portable recorder's SD Memory Card. This is suitable for operations such as long backup recordings. AUDIO MON/ADV REC/ PAUSE Used when operating the AG-HCK10G camera head (optional) to shoot with the portable recorder and record onto the SD Memory Card
  • Panasonic AG-HMR10 | Operating Instructions - Page 29
    Preparation Using the setup menus ■ Button operations in the setup menus Displays the menu. When value. Using the menus • The menu items in gray cannot be changed. 1 When the portable recorder is not recording or playing back the clips, press the [MENU] button. The following is displayed on the
  • Panasonic AG-HMR10 | Operating Instructions - Page 30
    settings. Press the [MENU] button to complete the setting and return to the normal screen. Initializing the setup menus Perform the following operation during REC mode to return the setup menus to their factory default settings. 1 Press the [MENU] button. 2 Select [OTHER FUNCTIONS] → [MENU INIT
  • Panasonic AG-HMR10 | Operating Instructions - Page 31
    , be sure to check and set [CLOCK SET] and [TIME ZONE]. This example shows how to adjust the calendar to 17:20 on October 10, 2009. 1 Press the portable recorder's [POWER] button for 2 seconds or longer to turn on the power. (Page 26) 2 Press the [MENU] button. Using the setup menus (Page 29
  • Panasonic AG-HMR10 | Operating Instructions - Page 32
    . 1 Connect the AC adapter to the portable recorder. (Page 25) • Leave off the power of the portable recorder. 2 Leave the portable recorder like this for about 4 hours. • The built-in battery recharges during this time. • Check the time code and menu operations after recharging. If the date and
  • Panasonic AG-HMR10 | Operating Instructions - Page 33
    . 3 Insert or remove the SD Memory Card. • Before removing the SD Memory Card, ensure that the SD Memory Card access lamp is not flashing orange. • Always format SD Memory Cards that have been used in other devices when first using them with this portable recorder. (Page 34) • If the system
  • Panasonic AG-HMR10 | Operating Instructions - Page 34
    the software, see the operating instructions (PDF file) that are included on the supplied CD-ROM. The AVCCAM Restorer can also be downloaded from the following website. https://eww.pavc.panasonic.co.jp/pro-av/ Formatting SD Memory Cards 1 Press the portable recorder's [POWER] button for 2 seconds
  • Panasonic AG-HMR10 | Operating Instructions - Page 35
    Preparation SD Memory Card recording times • Total available recording times (approx.) when using SD/SDHC Memory Cards manufactured by Panasonic SD Memory Card capacity PH∗1 (Highest quality mode∗3/ 1920 × 1080 pixels or 1280 × 720 pixels) Recording mode HA∗1 (High quality mode/ 1920 × 1080
  • Panasonic AG-HMR10 | Operating Instructions - Page 36
    modes can be used to record onto an SD Memory Card. SDI mode: When connected to an HD-SDI output device to perform input recording CAM mode: When connected to the AG-HCK10G camera head (optional) to perform shooting and input recording Performing HD-SDI input recording (SDI mode) An external device
  • Panasonic AG-HMR10 | Operating Instructions - Page 37
    and recording with a camera (CAM mode) When connected to the AG-HCK10G camera head (optional), you can shoot while operating the camera function with the portable recorder. Portable recorder AG-HCK10G camera head (optional) Camera cable (optional) CAMERA terminal 1 Connect the portable recorder
  • Panasonic AG-HMR10 | Operating Instructions - Page 38
    is pressed again immediately. • The portable recorder reads information from the SD Memory Card immediately after the card is inserted. Press the [REC/PAUSE] button to start recording after "PAUSE" is displayed in the operation status display. (Page 75) • If the input signal format is changed during
  • Panasonic AG-HMR10 | Operating Instructions - Page 39
    . When [SDI REGEN] is set to [ON], the [TC MODE], [TCG] and [TC PRESET] settings cannot be changed. Specifying the time code (TC PRESET) Set [TC PRESET] to record a value of your choice as the initial time code setting to be used at the start of recording. 1 Press the portable recorder's [POWER
  • Panasonic AG-HMR10 | Operating Instructions - Page 40
    a memo, using up to 8 characters from a choice of 16 different character types. User information is automatically saved in the memory and retained after you turn off the power. 1 Press the portable recorder's [POWER] button for 2 seconds or longer to turn on the power. 2 Press the [MENU] button
  • Panasonic AG-HMR10 | Operating Instructions - Page 41
    [USER] button will not work even if it is pressed when any of the following operations have been performed upon completion of recording/shooting. • Operation is switched to the PB mode • Recording format is changed • Portable recorder's power is turned off and then turned back on • SD Memory Card
  • Panasonic AG-HMR10 | Operating Instructions - Page 42
    of the following operations is performed after finishing recording or shooting, the last clip cannot be deleted even if the [USER] button is pressed. • Mode is changed to PB mode • Recording format is changed • Portable recorder's power is turned off and back on again • SD Memory Card is removed 42
  • Panasonic AG-HMR10 | Operating Instructions - Page 43
    recording or shooting. Each time you press the [USER] button, the display changes as follows. 0 : 00 . 00 Counter value display · Press the [USER the [DISPLAY SETUP] setup menu. • If the external input signal and time code or user information match when [SDI REGEN] → [ON] in the [TC/UB SETUP] setup menu
  • Panasonic AG-HMR10 | Operating Instructions - Page 44
    and hold) Screen display Function MIC LEV - Lower the audio input and output level (Page 47) MIC LEV + Raise the audio input and output level (Page 47) KEY LOCK Lock the button operations or cancel the setting (Page 46) Usable modes SDI CAM FA Display the focus assist (Page 46) -○ WFM
  • Panasonic AG-HMR10 | Operating Instructions - Page 45
    be downgraded. When you are shooting in manual mode, readjust the white balance whenever lighting is necessary if using the portable recorder when the ambient temperature has Operation Recording Other than recording Recording Other than recording AWB ABB OK • An error message appears on the LCD
  • Panasonic AG-HMR10 | Operating Instructions - Page 46
    canceled when the power is turned off. • While the operations are locked, (yellow) is displayed on the LCD monitor screen. When the remote control (optional) is connected to the REMOTE jack of the portable recorder, recording and zoom operations with the remote control are available even during key
  • Panasonic AG-HMR10 | Operating Instructions - Page 47
    is not connected to the microphone terminal, the input audio is selected as follows. CAM mode: Built-in microphone of the AGHCK10G camera head (optional) SDI mode: HD-SDI embedded audio signal Color bar By selecting [INT SG] → [ON] in the [RECORDING SETUP] setup menu, you can display a color bar
  • Panasonic AG-HMR10 | Operating Instructions - Page 48
    Operating the camera head The operation buttons on this portable recorder can be used to operate the camera function of the AGHCK10G camera head (optional). • Operation is not possible when a menu screen is displayed. First close the menu screen, and then perform the operation. AUDIO MON/ADV REC/
  • Panasonic AG-HMR10 | Operating Instructions - Page 49
    operation to start recording. Operation to start recording Operation to stop recording (Time) Actual recording recording is started in the following cases. · Immediately after switching from PB mode to CAM displayed on the LCD monitor screen. When the camera head is fixed, such as when using a
  • Panasonic AG-HMR10 | Operating Instructions - Page 50
    Operating the camera head (continued) Performing manual adjustments (CAMERA FUNCTIONS) The focus, iris, shutter speed and white balance can be manually adjusted. 1 Enable manual adjustment by setting the items in the [CAMERA SETUP] setup menu. (See table below) 2 Press the [ENTER] button to select
  • Panasonic AG-HMR10 | Operating Instructions - Page 51
    longer to focus when the shutter speed has been reduced, so it is recommended that the camera head be secured to a tripod, etc. for use. • When [OTHER DISPLAY] → frequency is 50 Hz, mutual interference will occur between the portable recorder's vertical sync frequency (approx. 60 Hz) and the
  • Panasonic AG-HMR10 | Operating Instructions - Page 52
    a television or computer monitor) in [SYNCRO SCAN] in the [CAMERA SETUP] setup menu. (Page 82) • Adjust the shutter speed to with the current recording format. This function will only operate with the preset values for each recording format. The preset values for the recording formats are as
  • Panasonic AG-HMR10 | Operating Instructions - Page 53
    Recording W Setting the white balance 1 Press the [ENTER] button to display W on the LCD monitor. • Depending on the environment, there may be some error in the adjustment. • Adjust time to adjust the white balance. Guide to preset values P3.2K (3200 K): halogen light P5.6K (5600 K): outdoors 53
  • Panasonic AG-HMR10 | Operating Instructions - Page 54
    mode. (Page 84) 30P mode: (When [SYSTEM FREQ] is set to [59.9Hz]) Shoot 30 frames a second in the progressive mode. For output and recording, the 30-frameper-second video signal is converted to a 60-field-per-second interlace. This mode gives you high quality images. 30 P A B C D E F G H I J Note
  • Panasonic AG-HMR10 | Operating Instructions - Page 55
    Memory Card which is loaded onto the portable recorder name: AG-HMR10). SHOOT: recorded, with the first clip to be recorded given the number 0. The USER CLIP NAME recording method is selectable. See page 57 for details. ∗2 When SCENARIO is to be input, you must input PROGRAM NAME. You cannot input
  • Panasonic AG-HMR10 | Operating Instructions - Page 56
    clip metadata, see page 55.) Selecting whether to record the metadata on the SD Memory Card Initializing the metadata inside the portable recorder Displaying the metadata inside the portable recorder 1 Press the [MODE] button to select REC mode. Operation modes (Page 28) 2 Press the [MENU] button
  • Panasonic AG-HMR10 | Operating Instructions - Page 57
    shooting ∗ The COUNT value is indicated as a 4-digit number. If clip metadata has been loaded and [USER CLIP NAME] → [TYPE2] has been selected, the COUNT value is increased by 1 each time recording is performed and a new clip is generated. The COUNT value can be reset using the following procedure
  • Panasonic AG-HMR10 | Operating Instructions - Page 58
    ] button to display the thumbnail screen. AUDIO MON/ADV 2 The portable recorder enters PB mode. REC/ PAUSE • Each time you press the Operation is not transferred to the PC mode when the AG-HCK10G camera head is connected. When the AG-HCK10G is connected, turn off the power, disconnect the camera
  • Panasonic AG-HMR10 | Operating Instructions - Page 59
    take some time for them to be displayed.) You can perform the following operations using the thumbnail screen. • Play and delete clips • Format SD Memory Cards • Add or delete indexes • Add or delete shot marks 1 2 34 0004 MI 11 12 10 56 7 8 9 Playback (Continued on the next page) 59
  • Panasonic AG-HMR10 | Operating Instructions - Page 60
    during repeat playback. 3 Card status display Displays the SD Memory Card status. 4 Battery remaining display (Page 24) Displays the remaining battery capacity. 5 Cursor (yellow frame) Displayed on the currently selected thumbnail. 6 Recording mode display Displays the recording mode if the clip
  • Panasonic AG-HMR10 | Operating Instructions - Page 61
    . is displayed on the LCD monitor screen. When the playback is operated, the playable clips are played back repeatedly. • Repeat playback will The initial setting is the format that was set in [REC FORMAT] in the [RECORDING SETUP] setup menu (REC mode). 4 Press the [MENU] button to return to
  • Panasonic AG-HMR10 | Operating Instructions - Page 62
    in step 2. • This setting will be canceled if the power is turned off or if the portable recorder is switched to CAM mode. Setting the skip method (SKIP MODE) Use this setting to set the operation performed when pressing or while playback is paused. 1 Press the [MENU] button. Using the setup menus
  • Panasonic AG-HMR10 | Operating Instructions - Page 63
    Thumbnail operations Selecting the thumbnail display method (THUMBNAIL SETUP) You can for the clips. TC: Time code UB: User information TIME: Shooting time DATE: Shooting date DATE & TIME: Shooting date and time DATE FORMAT: Select the format of the recording date and time that is displayed when [
  • Panasonic AG-HMR10 | Operating Instructions - Page 64
    be deleted. • If you select [ALL CLIPS] to delete all clips from the memory, the operation may take some time to complete, depending on the size of the clips to be is not possible to add indexes to clips recorded using a consumer camcorder. • It is not possible to adjust the volume when adding
  • Panasonic AG-HMR10 | Operating Instructions - Page 65
    to select an item, and then press the [ENTER] button. 2 Select [CARD FUNCTIONS], and then press the [ENTER] button or . CARD FORMAT: Formats the SD Memory Card. Insert the card that you want to format into the portable recorder, select whether or not to format (YES/NO), and then press the
  • Panasonic AG-HMR10 | Operating Instructions - Page 66
    Thumbnail operations (continued) SD Memory Card information screen Clip information screen 1 2 3 1 REMAIN: Displays the remaining SD Memory Card capacity. 2 SD STANDARD: Displays whether or not the SD Memory Card has been formatted in the SD or SDHC standard (SUPPORTED/NOT SUPPORTED). 3 PROTECT:
  • Panasonic AG-HMR10 | Operating Instructions - Page 67
    times normal speed. (Only when [SYSTEM FREQ] is set to [59.9Hz]) • If fast forward or rewind is performed consecutively for clips that have a short recording time, the playback speed may slow down. Next/previous clip 1 Press during playback to pause the clip. 2 Press or . • The display moves to the
  • Panasonic AG-HMR10 | Operating Instructions - Page 68
    images on a television or monitor that is connected to the HD-SDI OUT terminal or HDMI terminal of the portable recorder. 1 Connect the portable recorder to a television or monitor. (Page 70) 2 Start playback on the portable recorder. • To display the information that appears on the LCD monitor on
  • Panasonic AG-HMR10 | Operating Instructions - Page 69
    the external microphone (optional) is connected to the microphone terminal, the recorded sound is switched as follows. CAM mode: Microphone built into camera head → external microphone SDI mode: Sound multiplexed on the HD-SDI input signals → external microphone While color bars are displayed: 1 kHz
  • Panasonic AG-HMR10 | Operating Instructions - Page 70
    Connect to the TV/ monitor terminals ■ When outputting video and audio signals from the portable recorder to an external device, connect to the input terminals of the external device. • We recommend Panasonic's HDMI cable. • This product is not compatible with VIERA Link. • Signals cannot be output
  • Panasonic AG-HMR10 | Operating Instructions - Page 71
    ensure that the SD memory card access lamp is not flashing and that the card is not currently being accessed. • Operations cannot be performed on the portable recorder while in PC mode. • The SD Memory Card cannot be accessed while the card slot cover is open. • For AG-HMR10E only: Data for which
  • Panasonic AG-HMR10 | Operating Instructions - Page 72
    from the SD Memory Card, [TC∗] is displayed. UB 12 34 56 78 User information · When user information cannot be loaded correctly from the SD Memory Card, [UB∗] is displayed. 2 Media information display Displays basic information about the inserted SD Memory Card. : Recording possible : Card is write
  • Panasonic AG-HMR10 | Operating Instructions - Page 73
    (Page 76) • AWB error message (AWB NG) (In CAM mode) 8 Focus assist display (In CAM mode) Displayed when focus assist is used. (Page 46) • There is no output to external devices. 9 Microphone level automatic control display Displayed when [MIC ALC] → [ON] is set in the [RECORDING SETUP] setup menu
  • Panasonic AG-HMR10 | Operating Instructions - Page 74
    the REMOTE jack of the portable recorder, recording and zoom operations with the remote control are available even during key lock. 27 Remaining battery capacity display When using Panasonic-manufactured batteries that are compatible with the portable recorder, the remaining battery capacity is
  • Panasonic AG-HMR10 | Operating Instructions - Page 75
    (paused in initial scene) 30 Input signal display SDI: Displayed when in SDI mode. • The display flashes when recording cannot be performed, such as when the input signal and recording format are different. CAM: Displayed when in CAM mode. • Flashes if the camera head has an abnormality, such as
  • Panasonic AG-HMR10 | Operating Instructions - Page 76
    mode to another, disconnect the USB cable. ■ I INCOMPATIBLE CARD. PLEASE CHECK CARD. Recording may not be successful with this card. Check the card. INVALID KEY INPUT • Displayed when a button is operated during key lock. (Page 46) ■ N NO CARD No card is inserted. NOW ACCESSING. PLEASE DO NOT REMOVE
  • Panasonic AG-HMR10 | Operating Instructions - Page 77
    FORMAT? YES NO Do you want to format the SD Memory Card now? Yes/No SDI INPUT ERROR. (OTHER FORMAT) • Displayed when the format of the SDI input signal is different from the recording format of the portable recorder. SET DATE AND TIME Set the clock. ■T THE CLIP IS PROTECTED. PLEASE CANCEL PROTECTION
  • Panasonic AG-HMR10 | Operating Instructions - Page 78
    Page 88). No. Display item Operation modes Display can be switched on/ SDI CAM PB off in [OTHER DISPLAY] Camera functions display 17 Auto iris control display 18 Iris display 19 Zoom position display 20 SDI through output display 21 Focus control information display 22 Index/shot mark recording
  • Panasonic AG-HMR10 | Operating Instructions - Page 79
    setup menu. ■ SDI input signal and SDI output/HDMI output list SDI input signal and recording format setting [SDI OUT] item setting HD-SDI OUT terminal output HDMI terminal output Match, or AG-HCK10G is connected ON DOWNCON∗ OFF HD-SDI output (Same as recording format) SD-SDI Not output Not
  • Panasonic AG-HMR10 | Operating Instructions - Page 80
    OTHER DISPLAY LCD BACKLIGHT LCD DTL LCD SET CARD READ RECORD USER CLIP NAME CLIP COUNT RESET META DATA PROP META INITIAL SET USER CLOCK SET TIME ZONE POWER SAVE SYSTEM FREQ SYSTEM INFO MENU INIT OPERATION LCD OPERATION (When the AG-HCK10G camera head (optional) is connected) REC MENU
  • Panasonic AG-HMR10 | Operating Instructions - Page 81
    PROTECT SDI OUT HDMI OUT SEL SDI EDH DOWNCON MODE OUTPUT OSD DATE/TIME LEVEL METER CARD & BATTERY OTHER DISPLAY LCD BACKLIGHT LCD SET CARD FORMAT USER CARD STATUS CLOCK SET CLIP PROPERTY TIME ZONE SYSTEM INFO OPERATION LCD OPERATION CAMERA OPERATION∗ ∗ Only displayed when the AG-HCK10G
  • Panasonic AG-HMR10 | Operating Instructions - Page 82
    CAMERA SETUP Item SYNCRO SCAN Display mode CAM DETAIL LEVEL CAM V DETAIL LEVEL DETAIL CORING CAM CAM CHROMA LEVEL CHROMA PHASE COLOR TEMP CAM CAM CAM MASTER PED CAM A.IRIS LEVEL CAM DRS CAM 15 Sets the desired auto iris level. -10...0...+10 Sets the DRS (Dynamic Range Stretcher) function
  • Panasonic AG-HMR10 | Operating Instructions - Page 83
    CAMERA SETUP (continued) Item GAMMA KNEE MATRIX SKIN TONE DTL O.I.S. IRIS FOCUS D.ZOOM Display mode CAM CAM CAM CAM CAM CAM CAM CAM MANUAL: Enables manual adjustment. Sets the digital zoom. OFF: Does not use digital zoom. ×2: Uses × 2 digital zoom. ×5: Uses × 5 digital zoom. ×10: Uses × 10
  • Panasonic AG-HMR10 | Operating Instructions - Page 84
    in the S-VITC information that is added to HD-SDI. TYPE3: Sets when using a camera-recorder that is not manufactured by Panasonic. • For details on whether to select TYPE1 or TYPE2, see "Recording formats and recording marks of Panasonic camera-recorders". (Page 85) • See the following web site
  • Panasonic AG-HMR10 | Operating Instructions - Page 85
    TYPE1 and TYPE2. For details on operation, see the operating instructions for the Panasonic camerarecorder. - ∗ In the initial setting, the recording mark is not superimposed onto the HD-SDI signal. If the UB (LTC) or VITC (S-VITC) of the connected camera recorder is set to the frame rate, it
  • Panasonic AG-HMR10 | Operating Instructions - Page 86
    rate of the recording format is set to 24P. (Only when [SYSTEM FREQ] is set to [59.9Hz]) TCG SDI/CAM Sets the operation mode in which the time code of the internal time code generator is advanced. FREE RUN: The time code is advanced regardless of the operation mode. A slight time error may occur
  • Panasonic AG-HMR10 | Operating Instructions - Page 87
    AV OUT SETUP Item SDI OUT Display mode SDI/CAM PB HDMI OUT SEL SDI/CAM PB SDI EDH SDI/CAM PB SDI EE SEL SDI DOWNCON MODE SDI/CAM PB HP MODE CAM Description of settings Selects the output video format of the SDI OUT terminal. ON: Outputs in the recording format. DOWNCON: Outputs in the
  • Panasonic AG-HMR10 | Operating Instructions - Page 88
    Item ZEBRA Display mode CAM SAFETY ZONE CAM FOCUS BAR CAM REC COUNTER SDI/CAM OUTPUT OSD SDI/CAM PB DATE/TIME SDI/CAM PB LEVEL METER ZOOM & FOCUS CARD & BATTERY SDI/CAM PB CAM SDI/CAM PB OTHER DISPLAY LCD BACKLIGHT LCD DTL SDI/CAM PB SDI/CAM PB SDI/CAM LCD SET SDI/CAM PB Description of
  • Panasonic AG-HMR10 | Operating Instructions - Page 89
    YES NO META DATA Item CARD READ RECORD USER CLIP NAME CLIP COUNT RESET META DATA PROP META INITIAL SET Display mode SDI/CAM SDI/CAM SDI/CAM SDI/CAM SDI/CAM SDI/CAM Description of settings Loads the metadata that is recorded on the SD Memory Card onto the portable recorder. YES NO • "NO FILE" is
  • Panasonic AG-HMR10 | Operating Instructions - Page 90
    [REC FORMAT] setting in SDI/CAM mode before moving to PB recording User information TIME: Shooting time DATE: Shooting date DATE & TIME: Shooting date and time Selects the format of the clip's date display that is displayed when [DATA DISPLAY] → [DATE] is selected. (AG-HMR10P) (AG-HMR10E
  • Panasonic AG-HMR10 | Operating Instructions - Page 91
    OPERATION Item Memory Card (Page 34) will delete all clips even if they are protected. OTHER FUNCTIONS Item USER CLOCK SET Display mode SDI/CAM PB SDI/CAM SHOT MARK∗2: Adds a shot mark. LAST CLIP: Deletes the last recorded clip. COUNTER∗2: Switches the counter display. (Press the button for 2
  • Panasonic AG-HMR10 | Operating Instructions - Page 92
    the [ENTER], [MENU], [AUDIO MON/ADV], [USER], [REC/PAUSE] and [SHIF/EXEC] buttons are not operated for about 5 minutes while an SD Memory Card is inserted during SDI/CAM mode. ON: Turns off the portable recorder's power. OFF: Does not turn off the portable recorder's power. • Even when [ON] is
  • Panasonic AG-HMR10 | Operating Instructions - Page 93
    OTHER FUNCTIONS (continued) Item SYSTEM INFO MENU INIT OPERATION LCD OPERATION CAMERA OPERATION Display mode SDI/CAM PB SDI/CAM SDI/CAM PB SDI/CAM PB CAM PB Description of settings Displays the version of the portable recorder system. Returns the menu settings to the factory default settings. •
  • Panasonic AG-HMR10 | Operating Instructions - Page 94
    Troubleshooting Power supply There's no power. • Make sure the battery and AC adapter are connected properly. P25 Check the connections again. Power goes off for no apparent reason. • To prevent the battery from running down needlessly, the portable P92 recorder automatically turns off when
  • Panasonic AG-HMR10 | Operating Instructions - Page 95
    I cue or review a clip. Images do not appear on • Make sure the input selector on your television is set correctly. - the television even though Read the television's instructions carefully and select the correct I have connected the video input connector for the recorder. recorder properly
  • Panasonic AG-HMR10 | Operating Instructions - Page 96
    the USB connection cable. An error message appears • Always follow instructions on how to remove hardware safely as - on the computer when the appropriate for your computer when disconnecting the USB cable. USB connection cable is disconnected. SD Memory Card The recorded images on an • The
  • Panasonic AG-HMR10 | Operating Instructions - Page 97
    smooth when changing from HA mode to HG mode, or from HG mode to HA mode. ■ Some clips have been recorded using PRE REC function Normal recording PRE REC recording PRE REC recording Normal recording Video pauses momentarily during clip changeover. Playback is smooth when changing from PRE REC
  • Panasonic AG-HMR10 | Operating Instructions - Page 98
    temperature range: 15 °C to 25 °C (59 °F to 77 °F )] [Recommended relative humidity: 40 % to 60 %] Portable recorder • Wrap the recorder in a soft cloth to keep the dust off. SD Memory Cards • After ejecting an SD Memory Card from the unit, be absolutely sure to stow it in its own case. • Do not
  • Panasonic AG-HMR10 | Operating Instructions - Page 99
    /60i 720/60P 1080/60i 1080/60i 1080/60i Frame rate 30P (CAM mode only) 1080/30P (over 60i) 720/30P (over 60P) - 24P (CAM mode only) 1080/24P (Native recording) 720/24P (Native recording) - ■ When [SYSTEM FREQ] is set to [50Hz] Recording mode 1080/50i PH 720/50P HA 1080/50i HG 1080/50i
  • Panasonic AG-HMR10 | Operating Instructions - Page 100
    onto the SD Memory Card, be sure to use the dedicated AVCCAM Viewer. The AVCCAM Viewer can be downloaded from the following website. (Compatible OS: Windows XP/Windows Vista/Mac OS X 10.5/Mac OS X 10.4) https://eww.pavc.panasonic.co.jp/pro-av/ ■ Concerning the handling of the recorder's metadata
  • Panasonic AG-HMR10 | Operating Instructions - Page 101
    shutter speed of 1/2, gain 34 dB) Digital zoom 2×, 5×, 10× (set in menu) [Recording/playback] Recording format AVCHD specifications Compression method MPEG-4 AVC/H.264 Recording media SD Memory Card: 512 MB, 1 GB, 2 GB (FAT12 and FAT16 format) SDHC Memory Card: 4 GB, 6 GB, 8 GB, 12 GB, 16 GB, 32
  • Panasonic AG-HMR10 | Operating Instructions - Page 102
    HD-SDI input BNC ×1 0.8 V [P-P] 75 Ω SDI output BNC ×1 0.8 V [P-P] 75 Ω HDMI output HDMI ×1 When [SYSTEM FREQ] is set to [59.9Hz] 1080/60i, 720/60p, 480/60p When [SYSTEM FREQ] is set to [50Hz] 1080/50i, 720/50p, 576/50p (Not compatible with VIERA Link) [Audio system] Compression method Recording
  • Panasonic AG-HMR10 | Operating Instructions - Page 103
    61 RESUME PLAY (resume playback 62 S Screen displays 72 SD Memory Card access lamp 27 SD speed class 16 SD/SDHC Memory Cards 16, 33 Protection 33 Repair 34 Formatting 34 Recording time 35 Setup menus Button operations 29 CAMERA SETUP 82 RECORDING SETUP 84 TC/UB SETUP 86 AV OUT SETUP 87
  • Panasonic AG-HMR10 | Operating Instructions - Page 104
    CHECK 41 SPOTLIGHT 41 BACKLIGHT 41 ATW LOCK 41 LCD DTL 42 LCD REVERSE 42 INDEX 42 SHOT MARK 42 LAST CLIP 42 COUNTER 43 USER CLIP NAME 57 User information 40 Volume adjustment Input audio level 47 Output audio level 68 W WFM (wave form monitor 46 Z Zoom 48 104
  • Panasonic AG-HMR10 | Operating Instructions - Page 105
    products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. Penalties may of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and
  • Panasonic AG-HMR10 | Operating Instructions - Page 106
    P E
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Reference
Menu
Displays
Editing
Playback
Recording
Preparation
Description
of parts
Before use
This product is eligible for the AVCCAM
3 Year Warranty Repair Program. For
details, see page 7.
Operating Instructions
Memory Card Portable Recorder
Model No.
AG-HMR10P
Model No.
AG-HMR10E
S0809S0 -M
VQT2H54(E)
Before operating this product, please read the instructions carefully and save this manual
for future use.
ENGLISH