Panasonic AG-HMR10 Operating Instructions - Page 25
Using the battery, Using the AC adapter
View all Panasonic AG-HMR10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the battery Installation Insert the battery into the battery compartment of the portable recorder until it clicks into place. Removal 1 Press the [POWER] button for 2 seconds or longer to turn off the power. Check that the POWER lamp goes off. 2 Remove the battery while pressing the battery release button and sliding the battery in the direction of the button. • Support the battery with your hand to ensure that it will not fall. Battery release button Preparation Panasonic VW-VBG260 battery may be used with this product. POWER lamp Using the AC adapter Installation 1 Connect the DC cable to the AC adapter. 2 Plug the AC power supply cable into the power outlet. 3 Insert the DC cable plate into the battery compartment of the portable recorder until it clicks into place. Removal 1 Press the [POWER] button for 2 seconds or longer to turn off the power. Check that the POWER lamp goes off. 2 Remove the DC cable plate while pressing the battery release button and sliding the DC cable plate in the direction of the button. 3 Disconnect the AC power supply cable from the power outlet. • The battery cannot be charged while the DC cable is connected to the AC adapter. • The AC adapter is designed to be compatible with all power supply voltages (110 V to 240 V) and power supply frequencies (50 Hz, 60 Hz) around the world. Note that the shape of the power outlet varies depending on the country. Use a plug that is suitable for the country of use. Contact a Panasonic authorized service center for assistance in selecting a converter plug. • Disconnect the AC power supply cable from the power outlet when not using the portable recorder. 25