Panasonic AG HPX170 Memory Card Camera Recorder - Page 91
Warnings, DIR ENTRY NG CARD - upgrade
UPC - 086753091052
View all Panasonic AG HPX170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Warnings COPY INHIBITED Can not record correctly because of the input signal copy-guarded. EXTERNAL1394 DISCONNECT When the 1394 CONTROL item of the OTHER FUNCTIONS screen of the Setup menu is set to EXT and recording without connecting external units with 1394 terminal, this display appears. INCOMPATIBLE CARD The card cannot be used since it does not comply with the specified standard. RUN DOWN CARD The maximum number of overwrites on the P2 card has been exceeded. Operation continues. However, recording or playback may not operate correctly. It is recommended that you replace the P2 card with another one. DIR ENTRY NG CARD The directory structure on the P2 card is not supported. Operation continues. However, recording or playback may not operate correctly. The P2 card cannot be used for the special recording functions (interval recording, one-shot recording, and loop recording). Back up data on the P2 card as soon as possible, and format the card before using it again. FORMAT ERR ! This card is not compliant with the P2 standard. LOW BATTERY No operations can be performed since the battery charge is low. CANNOT ACCESS Cannot access clips. CANNOT DELETE Cannot delete clips. CANNOT FORMAT Cannot format P2 cards or SD memory cards. CANNOT REPAIR Cannot repair clips. CARD FULL The P2 card does not have enough free space for recording. WRITE PROTECTED The P2 card or SD memory card is writeprotected. NO CARD A P2 card or SD memory card has not been inserted. NO FILE There are no files (version upgrade files, etc.). Errors These are displayed when an error occurs in the unit, P2 card, or other component. If the problem is not fixed by turning the power off and then on again, either replace the card based on the error information, or consult with your dealer as to which one is to be purchased. CANNOT PLAY This is displayed when trouble has occurred during playback. CARD ERR (1) (2) (1/2) (Trouble has occurred in the P2 card found in the slot indicated by the number.) CLIP ERROR (clip trouble) UPDATING (clip recording) ERROR (other type of trouble) SYSTEM ERROR This is displayed when trouble has occurred in the system. Switch ON the power again. P2 MICON ERROR (no P2 microcomputer response) P2 CONTROL ERROR (trouble in P2 control) REC RAM OVERFLOW (recording RAM overflow) TURN POWER OFF This display appears when an abnormality occurs as a result of the card being pulled out while data is being accessed. REC WARNING This is displayed when trouble has occurred during recording. Carry out recording once again. If the warning persists, consult your dealer. CARD ERR (1) (2) (1/2) (Trouble has occurred in the P2 card found in the slot indicated by the number.) • If the warning continues, turn off the power. • If the warning appears even when recording is carried out again, replace the card with another one. ERROR (other type of trouble) Displays (Continued on the next page) 91