Panasonic AGHVX200P Memory Card Camcorder - Page 112
Display Setup Screen, Video Out Osd
View all Panasonic AGHVX200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Setup menu list (continued) DISPLAY SETUP screen Item ZEBRA DETECT 1 P2 TAPE ZEBRA DETECT 2 P2 TAPE MARKER P2 TAPE SAFETY ZONE P2 TAPE VIDEO OUT OSD P2 TAPE DATE/TIME P2 TAPE LEVEL METER P2 TAPE Display mode Description of settings (Camera) Selects the brightness level of the left-leaning zebra patterns on the screen. 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105% (Camera) Selects the brightness level of the right-leaning zebra patterns on the screen. 50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF • The zebra patterns do not appear if you select OFF. (Camera) Select ON to display the marker. (Page 43) ON OFF • To display the marker, press the ZEBRA button. (Camera) Sets SAFETY ZONE to ON or OFF. OFF , 90%, 4:3 (Camera) Select ON to output the information displayed on the screen together with the (MCR/ signals from the VIDEO IN/OUT jack. VCR) ON OFF • When a tape is used for recording, no on-screen displays (OSD) will be output while recording is underway even when this function has been set to ON. However, OSD will be output to the 1394 output during recording standby. If OSD is not required, set the function to OFF. • If this option is set to ON when performing backup recording while a tape is used, the OSD will be output to the 1394 output at all times except when the unit is in the recording mode. Bear in mind that the OSD may be recorded inadvertently if backup recording is performed when a setting other than OFF is selected for the 1394 CONTROL option (page 114) on the OTHER FUNCTIONS screen. (Camera) Sets whether to display the date and time on the screen and whether to output (MCR/ from the VIDEO IN/OUT jack. VCR) OFF: The date and time are not displayed. TIME: The time is displayed. DATE: The date is displayed. TIME&DATE: The time and date are displayed. • If you select any setting other than OFF, the date and/or time are included in the output signals regardless of the VIDEO OUT OSD setting. (The OFF setting can be selected also using the remote control. (Page 75)) (Camera) Select ON to display the audio level meter. (MCR/ ON OFF VCR) indicates the factory setting. 112