Panasonic AGHVX200P Memory Card Camcorder - Page 26
Checking photos taken (REC CHECK), P2 card access lamps, Protecting against a possible erasure
View all Panasonic AGHVX200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Basic shooting operations (P2 card) (continued) P2 Checking photos taken (REC CHECK) In the shooting pause mode, press the REC CHECK button. A few seconds of the last thing you shot play. • Note that this REC CHECK portion will also be recorded to any equipment you have set up to make backup recordings. • Only the POWER and START/STOP buttons are operable during REC CHECK. • The REC CHECK function does not work when PC, MCR or DUB has been selected as the operation mode. The HD recording(720P/60P) settings are already made in the default mode. (To view the current settings, see page 44.) P2 card access lamp Protecting against a possible erasure Switch the write-protect switch of the P2 card to [PROTECT]. P2 card access lamps CAMERA mode (MCR) Lights green: Data can be saved onto the cards or loaded from them. Blinks green (slow): No available space on card, card is write-protected Lights orange: Slot that is the object of recording Blinks orange : Data is now being accessed. Blinks orange (fast): A card is now being recognized. Both lamps blink orange: Ejection of card during access Off: Cards have not been inserted or formatted. Insertion of incompatible card. PC mode (USB DEVICE) Blinks orange: Data is now being accessed. Off: A status other than access underway. PC mode (1394 DEVICE) Blinks orange: Connected Off: Not connected PC mode (1394 HOST) Lights green: Access standby. Blinks orange: Data is now being accessed. Off: Cards have not been inserted or formatted. Insertion of incompatible card. Write-protect switch PROTECT 26