Panasonic AW-HN38H AW-HN38H Operating Instructions - Page 35
Operating, Instructions, eliminates need for camera power configurations
View all Panasonic AW-HN38H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Characteristics (continued) Flexible camera layout enabled by simple connection and installation ●● The unit features excellent connectivity and installability thanks to the IP control; a lightweight main unit, and the turn-lock mechanism, which enables the user to install it on his or her own (only when used indoors). Note ●● Bear in mind that the unit is designed to be used indoors only: It cannot be used outdoors. Equipped with a high dynamic range (HDR) imaging function ●● This reduces overexposure and loss of dark detail in images with high light-dark contrast between the background and the subject. Equipped with an image stabilization function ●● When shaking is detected in the input image, the shaking is reduced by shifting the position of the area to be cropped according to the amount of shaking. Easy connections and settings courtesy of IP control ●● Up to a hundred units can be operated by IP connection from a Panasonic controller (AW‑RP50, AW-RP120 and AK-HRP200). (The maximum length of the LAN cables is 100 meters [328 ft].) ●● By automatically recognizing the IP addresses and changing their allocation, the previous restrictions on the connections between the cameras and controllers using serial interfaces and the time and trouble taken to establish the various settings can be significantly reduced, and by configuring a network, flexible camera control can be implemented anywhere with any of the cameras. PoE+ *1 eliminates need for camera power configurations ●● Configurations for camera's power supply are not necessary when the unit is connected to a network device that supports the PoE+ standard (IEEE802.3at compliant)*2. Notes ●● If the AC adaptor and a PoE+ power supply are connected simultaneously, the AC adaptor will have priority. ●● Use a category 5e cable or higher when using a PoE+ power supply. The maximum length of the cable between the power supply unit and the unit is 100 meters (328 ft). Using a cable that is lower than category 5e may result in reduced power supply capabilities. *1: Power over Ethernet Plus. Referred to as "PoE+" in this manual. *2: For details on PoE+ power supply devices for which operation has been verified, consult your local dealer. Operating Instructions 35