Panasonic AW-PH650NK1 System Camera and Switcher Product Lineup Catalog - Page 71

Studio Camera System As of April, 2017 Remote Camera System GPI OUT1/GPI OUT 2 terminal GPI OUT: 48 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female) x 2, inch screw Accessories AC cable -AV‑HS60U2P: 2 cables -AV‑HS60U2E: 4 cables Rack-mounted rear panel support bracket Screws for the rack-mounted rear panel support bracket: 8 screws Operating Guide for the AV-HS6000 series (Excerpted Version) Control Panel [AV-HS60C2P/E] General Power Supply AC100 V to 240 V, 50 Hz/60 Hz (AV-HS60C2 supports redundant power supply) Power Consumption 40 W Operating Ambient Temperature 0°C to 40°C (32°F to 104°F) Operating Ambient Humidity 10% to 90% (no condensation) Storage Temperature 0°C to 40°C (32°F to 104°F) Storage Humidity 10% to 90% (no condensation) Weight Approx. 13.9 kg (30.6 lbs.) (excluding accessories) Dimensions (W x H x D) 980 mm x 153.4 mm x 267 mm (38-19/32 inches x 6-1/32 inches x 10-1/2 inches) (excluding protrusions) Control Terminal Mainframe Terminal Compatible with 100Base-TX and AUTO-MDIX (For Mainframe AV-HS60U2 connection) Connection cable (supplied with AV-HS60C2): LAN cable (CAT5E), Straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft) • Connector: RJ-45 When connected to the terminal, no video will be displayed on the Menu Panel AV-HS60C3G. MENU PANEL Terminal Used only for the Menu Panel AV-HS60C3G • Connector: DVI-D • Because an independent signal format is used,cannot be displayed on a DVI-D monitor. • Cannot be used concurrently with a DVI-D monitor (computer) connected to the terminal. Select with the display selector switch. DVI-D Terminal Used for displaying menus to the DVI monitor (computer) • Connector: DVI-D • Monitor resolution: 1366 x 768 compatible monitor • Cannot be used concurrently with the terminal. Select with the display selector switch. For DVI monitor (computer) menu operation USB Terminal • Connector: USB (type A, female) • Cannot be used for the Menu Panel AV-HS60C3G. Display Selector Switch Switch for selecting terminal or terminal RS-422 Control Terminal COM1(M) Terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw COM2(RS-232) Terminal RS-232 Control Terminal For master/slave connection for controlling external devices • Connector: D-sub 9-pin (male), inch screw GPI IN: 8 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) GPI I/O Terminal GPI OUT: 10 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female), inch screw ME Number 2 ME Accessories Control Terminal Mainframe Terminal MENU PANEL Terminal DVI-D Terminal USB Terminal Display Selector Switch COM1(M) Terminal COM2(RS-232) Terminal GPI I/O Terminal ME Number Compatible with 100Base-TX and AUTO-MDIX (For Mainframe AV-HS60U2 connection) Connection cable (supplied with AV-HS60C4): LAN cable (CAT5E), Straight cable, STP (Shielded Twisted Pair), 10 m (32.8 ft) • Connector: RJ-45 When connected to the terminal, no video will be displayed on the Menu Panel AV-HS60C3G. Used only for the Menu Panel AV-HS60C3G • Connector: DVI-D • Because an independent signal format is used, cannot be displayed on a DVI-D monitor. • Cannot be used concurrently with a DVI-D monitor connected to the terminal. Select with the display selector switch. Used for displaying menus to the DVI monitor • Connector: DVI-D • Monitor resolution: 1366×768 compatible monitor • Cannot be used concurrently with the terminal. Select with the display selector switch. For DVI monitor menu operation • Connector: USB (type A, female) • Cannot be used for the Menu Panel AV-HS60C3G. Switch for selecting terminal or terminal RS-422 Control Terminal For master connection for controlling external devices • Connector: D-sub 9-pin (female), inch screw RS-232 Control Terminal For external device control connections • Connector: D-sub 9-pin (male), inch screw GPI IN: 8 inputs, general-purpose, photocoupler sensing ALARM OUT: 1 output, open collector output (negative logic) GPI OUT: 10 outputs, selected from general purpose, tally Open collector output • Connector: D-sub 25-pin (female), inch screw 2 ME Accessories AC Cable: 2 cables LAN Cable: 1 cable (used to connect with the Mainframe AV-HS60U2) Switch blank cap (large): 16 caps Switch blank cap (small): 8 caps Menu Panel [AV‑HS60C3G] General Power Supply DC12 V/0.54 A (Supplied from AV-HS60C2/AV-HS60C4 using the supplied cable) Power Consumption 6.48 W Operating Ambient Temperature 0°C to 40°C (32°F to 104°F) Operating Ambient Humidity 10% to 90% (no condensation) Storage Temperature 0°C to 40°C (32°F to 104°F) Storage Humidity 10% to 90% (no condensation) Weight Approx. 1.7 kg (3.7 lbs.) (excluding accessories) Dimensions (W x H x D) 290 mm x 177 mm x 46.1 mm (11-13/32 inches x 6-31/32 inches x 1-13/16 inches) (excluding protrusions) 4RU Control Terminal Control Panel Terminal Used only for the Control Panel AV-HS60C2/AV-HS60C4 • Connectors: DVI-D • Because an independent signal format is used,DVI-D source cannot be displayed. • Cannot be used concurrently with a DVI-D monitor connected to the terminal of the Control Panel AV-HS60C2/AV-HS60C4. Set the display selector switch of the Control Panel AV-HS60C2/ AV-HS60C4 to the terminal side. AC Cable -AV‑HS60C2P: 2 cables -AV‑HS60C2E: 4 cables LAN Cable: 1 cable (used to connect with the Mainframe AV-HS60U2) Switch blank cap (large): 24 caps Switch blank cap (small): 12 caps Control Panel AV-HS60C4P/E Accessories Connecting cable (with ferrite core) for the Control Panel AV-HS60C2/AV-HS60C4: 1cable Bracket for mounting the Control Panel AV-HS60C2/AV-HS60C4 Screws for the bracket for mounting the Control Panel AV-HS60C2/AV-HS60C4: 6 screws Power Supply AC100 V to 240 V, 50 Hz/60 Hz (Supports redundant power supply) Storage Module [AV-HS60D1G] Power Consumption 40 W General Operating Ambient Temperature 0°C to 40°C (32°F to 104°F) Operating Ambient Humidity 10% to 90% (no condensation) Weight Dimensions (W x H x D) Approx. 7.0 g (0.3 ozs.) 29.85 mm x 4.0 mm x 50.8 mm (1-3/16 inches x 5/32 inches x 2 inches) Storage Temperature 0°C to 40°C (32°F to 104°F) Accessories Storage Humidity 10% to 90% (no condensation) AV-HS60D1 Installation Guide Weight Approx. 15.0 kg (33.0 lbs.) (excluding accessories) Dimensions (W x H x D) 656 mm×160 mm×400 mm (25-53/64 inches×6-19/64 inches×15-3/4 inches) (excluding protrusions) Due to device characteristics, the storage module AV-HS60D1G is subject to data damage and overwriting restrictions. Backup of important data is recommended. 71 *For information on "AV-HS6000 Block Diagrams", see page 77. Live Switcher