Home » Panasonic Manuals » Laptops » Panasonic CF- » Manual Viewer

Panasonic CF- Wireless Display

Panasonic CF- - Toughbook 29 - Pentium M 1.6 GHz Manual

UPC - 092281867281

View all Panasonic CF- manuals

Add to My Manuals
Save this manual to your list of manuals

Panasonic CF- manual content summary:

Panasonic CF- | Wireless Display - Page 1
47 SD Memory Card 48 Bluetooth 49 Control Panel 53 For Effective Use 54 Troubleshooting Troubleshooting 55 Appendix LIMITEDUSELICENSEAGREEMENT...58 LIMITED WARRANTY 64 Specifications 62 Please read these instructions carefully before using this product and save this manual for future use.
Panasonic CF- | Wireless Display - Page 2
Panasonic wireless display. For optimum performance and safety, please read these instructions carefully. „ Terms and illustrations in these instructions errors, omissions or discrepancies between the wireless display and the manuals. „ Trademarks Microsoft®, Windows® and the Windows logo are
Panasonic CF- | Wireless Display - Page 3
, la quantité d'énergie émise par ce produit est beaucoup moins importante que l'énergie radioélectrique émise par des appareils sans fil tels que les téléphones portables. L'utilisation de ce produit ne comporte aucun risque pour le consommateur du fait que cet appareil opère dans les limites des
Panasonic CF- | Wireless Display - Page 4
les suivantes par exemple : z À bord d'un avion, ou z Dans tout autre environnement où les risques d'interférence sur d'autres appa- reils ou services sont perçus ou identifiables comme dangereux. Si vous n'êtes pas sûr de la réglementation applicable à l'utilisation d'appareils sans fil dans une
Panasonic CF- | Wireless Display - Page 5
. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
Panasonic CF- | Wireless Display - Page 6
from that to which the receiver is connected. z Consult the Panasonic Service Center or an experienced radio/TV technician for help. Warning To in a motor vehicle and visible to the driver only if used to support vehicle related functions such as vehicle information, system control, rear or side
Panasonic CF- | Wireless Display - Page 7
our products which relates to the R&TTE, please contact to our web address: http://www.doc.panasonic.de Contact: Panasonic Services Europe A Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Compliance Notice - CE Mark This equipment is in conformance with the requirements of the
Panasonic CF- | Wireless Display - Page 8
you lose the fuse cover the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from your local Panasonic Dealer. IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT
Panasonic CF- | Wireless Display - Page 9
Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this apparatus may not corre- spond with the coloured markings iden- tifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN-and- YELLOW must be connected to the terminal in the
Panasonic CF- | Wireless Display - Page 10
Precautions Wireless Display „ Usage Avoid Extreme Heat and Cold Do not store or use the wireless display in locations exposed to heat, direct sunlight, or extreme cold. Avoid moving the wireless display between locations with large temperature difference. Operation: 5 °C to 35 °C {41 °F to 95
Panasonic CF- | Wireless Display - Page 11
the ones listed below, a fire or electric shock may result. • Networks other than 100BASE-TX or 10BASE-T. • Phone lines [Telephone lines, internal phone lines (onpremise switches), digital public phones, etc.] Do Not Connect the AC Adaptor to a Power Source Other Than a Standard Household AC Outlet
Panasonic CF- | Wireless Display - Page 12
the one for which it was designed. Do Not Use This Wireless Display with a Battery Pack Other Than the One Specified Use only the specified Panasonic battery pack (CF-VZSU44U) with your CF-08. Use of batteries other than those manufactured and supplied by
Panasonic CF- | Wireless Display - Page 13
Stop Using Should the battery emit an abnormal odor, become hot to the touch, become discolored, change shape, or become in any way different from normal, remove it from the wireless display and stop using it. z Do not touch the terminals on the battery pack. The battery pack may no longer function
Panasonic CF- | Wireless Display - Page 14
Description of Parts A. LCD (Touchscreen) B. Wireless LAN antenna C. Bluetooth antenna D. Power status E. Power button F. Battery status G. DC-IN jack H. LAN port I. Cursor control button J. Keyboard button K. USB port L. USER button M. SD Memory Card slot N. SD Memory Card status 14
Panasonic CF- | Wireless Display - Page 15
may interrupt audio input or may cause a malfunction. F. Stylus holder G. Security lock You can connect a Kensington cable. Refer to the instruction manual of the cable. H. Speaker I. Expansion bus connector CAUTION z Do not put metallic objects or magnetic media close to the speaker. z Do
Panasonic CF- | Wireless Display - Page 16
Description of Parts Using the Tether The tether can be attached to the upper right or upper left corner of the display. It prevents the pen (included) from falling accidentally. Attaching the Tether 1 3 2 4 16
Panasonic CF- | Wireless Display - Page 17
you do not find the described accessories, contact your technical support office. • AC adaptor 1 • AC Cord 1 • Battery Pack 1 Model No.: CF-AA1623A • Stylus 1 • Cloth 1 Model No.: CF-VZSU44 • Tether (Î page 16 1 • Operating Instructions (This book 1 B Read the LIMITED USE LICENSE AGREEMENT
Panasonic CF- | Wireless Display - Page 18
First-time Operation C Slide the battery cover latch. D Open and remove the battery cover. E Firmly attach the battery pack to the connector. F Fit the battery cover into (A), and then close the battery cover. G Slide the battery cover latch. H Attach the hand strap. I Attach the hand strap cover. „
Panasonic CF- | Wireless Display - Page 19
the wireless display. • When the DC plug is not connected to the wireless display, disconnect the AC cord from your AC wall outlet. • Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could adversely affect your wireless display, an uninterruptible
Panasonic CF- | Wireless Display - Page 20
First-time Operation 3 Turn on the wireless display. Press the power button for approximately one or two seconds until the power indicator lights. 4 Calibrate the touchscreen. Touch the "+" marks on the calibration screen with the stylus (included) for about one second. After the calibration
Panasonic CF- | Wireless Display - Page 21
6 Make the network setting. Before making the settings for the wireless display, check the following server set- tings. z Is the remote desktop allowed to use? z IP address and subnet mask (if the name server is inside the network, use the server name instead.) z User name and password When making
Panasonic CF- | Wireless Display - Page 22
First-time Operation 7 Make the settings to connect the server. The client used will differ depending on the server. Server name z Microsoft® Windows® XP Professional z Microsoft® Windows® Server 2000 z Microsoft® Windows® Server 2003 z Citrix® MetaFrame Presentation Server 3.0 z Citrix®
Panasonic CF- | Wireless Display - Page 23
When making connections with Citrix® ICA® Client Perform the following procedure. A Double-tap on the desktop, and tap [Create New Connection]. B Enter the IP address or server name for the connection destination in [Server or Published Application], and tap [Save]. When the message appears, tap
Panasonic CF- | Wireless Display - Page 24
) CAUTION z Do not forget your password. If you forget your Supervisor Password, you will not be able to use your wireless display. Contact your technical support office. 24
Panasonic CF- | Wireless Display - Page 25
NOTE z The password will not be displayed on the screen. z You can use up to 40 alphanumeric characters (excluding spaces). z When the password has been set, you need to enter your password in [Current Password]. z To disable the password, leave the input field empty. z Disabling the Supervisor
Panasonic CF- | Wireless Display - Page 26
First-time Operation C. Skip Password Dialog Allows the User to log on without entering a password. When the User turns on the wireless display, the [Enter Password] screen is not displayed. (If you press the power button with the USER button pressed, the [Enter Password] screen will be displayed,
Panasonic CF- | Wireless Display - Page 27
9 Save the settings. Settings made up to step 8 must be saved (backed up) using the following procedure. If the settings are not saved, they will be lost when the wireless display is turned off. A Double-tap on the desktop and double-tap [Flash Backup]. Confirm that your wireless display is
Panasonic CF- | Wireless Display - Page 28
First-time Operation H Insert the media containing the files copied in step C-D, and then tap [Browse]. I Select the file and tap . J Tap [Next]. K Tap [Update Start]. L When the confirmation message appears, tap [Yes]. ROM Update will start. When ROM Update terminates, the wireless display will
Panasonic CF- | Wireless Display - Page 29
Starting Up/Shutting Down Starting Up 1 Turn on the wireless display. When you log on as a Supervisor When you log on as a User Press the power button with the USER button pressed. • If you do not do so, even when you set enter the Supervisor Password, the wireless display will run in the User
Panasonic CF- | Wireless Display - Page 30
Starting Up/Shutting Down 3 Connect to the server. When making connections with Microsoft® Remote Desktop Connection When making connections with Citrix® ICA® Client Double-tap *1 on the desktop. Double-tap *2 the desktop. The server desktop screen will appear. *1 The file name entered when
Panasonic CF- | Wireless Display - Page 31
„ When terminating the connection Perform the following operation. z Tap [Start] - [Log Off] - [Log Off]. You can terminate the connection using the following operation. zTap (A), and when the message appears, tap . CAUTION z
Panasonic CF- | Wireless Display - Page 32
Starting Up/Shutting Down B Press the power button with the keyboard button and USER button (Î page 38) pressed until the message "Reset the device to factory default..." appears. z When the [Enter Password] screen appears, enter the Supervisor Password and tap [OK]. C Select [Yes]. NOTE z When you
Panasonic CF- | Wireless Display - Page 33
LCD (Touchscreen) Using the Stylus Use the stylus provided to perform operations on the touchscreen. The stylus is located in the stylus holder (A), and can be held like a pen or pencil. The following operations are possible on the touchscreen. Tapping You can select an item on the screen by tapping
Panasonic CF- | Wireless Display - Page 34
LCD (Touchscreen) Handling the Touchscreen z Use the provided stylus with CF-08. Do not use an implement other than the stylus that comes with the wireless display. z Do not place any object on the surface or press down forcefully with sharppointed objects (e.g., nails), or hard objects that can
Panasonic CF- | Wireless Display - Page 35
A Double-tap on the desktop. B Double-tap [Buttons]. C Assign [Rotate Screen] to the keyboard button, long push, and tap . D Double-tap [Rotate]. E Add the check mark for [0 degrees (Landscape)] and [90 degrees], and tap . F Save the above setting. Refer to step 9 of "First-time Operation" (Î
Panasonic CF- | Wireless Display - Page 36
Battery Power Battery Indicator Battery indicator Not lit Pulsing orange Green Red Blinking red Blinking orange Battery status The battery pack is not inserted or not being charged. Charging is in progress. The battery is fully-charged. The remaining battery is approximately 9% or less. The
Panasonic CF- | Wireless Display - Page 37
You can reduce power consumption using the following method. When using the battery, the wireless display can be used for a longer period of time. Power conservation effects can be achieved even when the AC adaptor is connected. zDouble-tap on the desktop, dou- ble-tap [Power] and tap the [
Panasonic CF- | Wireless Display - Page 38
Buttons You can display screens for frequently used functions and applications by pressing the key- board button or USER button on this wireless display. Two functions can be assigned to each button; one that starts up with a short push (less than 2 seconds) and one that starts up with a long push
Panasonic CF- | Wireless Display - Page 39
Quick Menu Quick Menu is used to display information about the wireless display, or to enable frequently used functions and applications to be launched quickly without going through Control Panel (Î page 53). At the time of purchase, Quick Menu can be launched with a short push of the USER button .
Panasonic CF- | Wireless Display - Page 40
Quick Menu Customizing buttons A Double-tap on the desktop and then double-tap [Quick Menu]. The [QuickMenu Application Assignment] screen will appear. B In [1. Select Button], tap one button to which the function or application is to be assigned from among the four buttons. C In [2. Assign a
Panasonic CF- | Wireless Display - Page 41
Software Keyboard The Software Keyboard can be displayed on the wireless display, and you can then input characters or symbols by tapping the Software Keyboard. To show or hide the Software Keyboard (input panel) (at the time of purchase): z Press the keyboard button for less than 2 seconds. „ Input
Panasonic CF- | Wireless Display - Page 42
Software Keyboard (At the time of purchase, this wireless display is set to display the Input Panel Selector Screen using the following method.) • Press the keyboard button for more than 2 seconds. (Î page 38) • Press the USER button for less than 2 seconds to launch Quick Menu (Î page 39), and then
Panasonic CF- | Wireless Display - Page 43
A. Option settings Display the [Transcriber: Options] screen of Transcriber option settings. (Î below) B. Change recognition mode Run hand/block letter (character (alphabet/symbol/numeric)). C. Display symbol input panel Display the screen for symbol input. D. Change upper/lower/symbol mode Change
Panasonic CF- | Wireless Display - Page 44
Software Keyboard „ [Inking] tab A. Recognition Delay Slide the bar to set the time for recognition of handwritten characters. B. Add space after If the check mark is added, when handwritten characters are recog- nized and displayed on the screen, a single space will also be displayed at the end
Panasonic CF- | Wireless Display - Page 45
„ Shorthand The following functions can be assigned for handwriting input. Text expansion Display words, phrases, or sentences. e.g.: Input "ABC" in handwriting to display "Hello." Function Display dates, names, or other information. e.g.: Input "DEF" in handwriting to display the date and time.
Panasonic CF- | Wireless Display - Page 46
Software Keyboard F Tap [Finish]. The screen will automatically return to step B. To assign two or more functions in succession, repeat step B to F. G Tap . H Tap to close the [Transcriber: Options] screen. I Save the above setting. Refer to step 9 of "First-time Operation" (Î page 27).
Panasonic CF- | Wireless Display - Page 47
Signature Capture Signature Capture operates on CF-08, supporting input of signatures in applications running on the connection destination server. At the time of purchase, this wireless display is not preset to enable startup
Panasonic CF- | Wireless Display - Page 48
SD Memory Card About SD Memory Card An SD Memory Card can be used for the following purposes. z The exchange of data with various devices equipped with an SD Memory Card slot, and so on. z Use as a memory card (e.g., use as a storage unit on which files can be written). Inserting/Removing a Card 1
Panasonic CF- | Wireless Display - Page 49
Bluetooth To enable Bluetooth 1 Double-tap on the desktop. 2 Double-tap [Bluetooth Device Properties]. 3 Tap the [General] tab, and make the necessary settings. A. Enable Bluetooth D. Automatically enable bluetooth at Add the check mark for [Enable Blue- start-up tooth] to enable Bluetooth.
Panasonic CF- | Wireless Display - Page 50
Bluetooth „ To make connections with the serial port Tap the [Serial Port] tab, and make the following procedure. A Turn on the Bluetooth device. B Tap [Select Device] (A). z If you add the check mark for [Auto Reconnect] (C), the connection will be made automatically when Bluetooth is enabled. C
Panasonic CF- | Wireless Display - Page 51
appear multiple times or in a different order.) For details, refer to the manual that comes with your Bluetooth device. A Turn on the Bluetooth device. B COM7], and then tap [Next]. L At the [Phone Number] screen, enter the phone number, and tap [Finish]. M Double-tap [Network and Dial-up
Panasonic CF- | Wireless Display - Page 52
-Up Connection] screen, enter the proper User Name, Password, and Domain (G) for the connection destination. If the phone number entered in step L does not display correctly at "Phone" (H), such as too many numbers showing, perform the following operation. Tap [Dial Properties] (I). Tap [Dialing
Panasonic CF- | Wireless Display - Page 53
Control Panel In Control Panel, you can see the list of applets that can be used on this wireless display. If you double-tap the icon (or the name), the screen will start up. Explanations for each Control Panel applet can be displayed using the following procedure. A Double-tap on the desktop. B
Panasonic CF- | Wireless Display - Page 54
on the screen. Sweep dust/dirt with fine brush, then wipe it with "dry" soft cloth used for cleaning glasses. Apply camera lens cleaner on a soft gauze and clean it with gentle force. Then, wipe with dry soft cloth used for cleaning glasses. „ Areas excluding the LCD
Panasonic CF- | Wireless Display - Page 55
Troubleshooting Follow the instructions below when a problem has occurred. For a software problem, refer to the software's instruction manual. If the problem persists, contact your technical support office. „ Starting Up Cannot start up. z Connect the AC adaptor. The power indica- z Insert a
Panasonic CF- | Wireless Display - Page 56
Troubleshooting „ Shut Down Cannot shut down. z Press the power button for four does not work. z Check the connection. z The device driver may not work. Refer to the instruction manual of the device. z Do not connect two mouse devices simultaneously. Cannot print. z Check the printer connection
Panasonic CF- | Wireless Display - Page 57
„ Others No response. z The screen content may not display correctly due to poor signal quality. In such case, move to a place where signal quality is good then make a connection. z Press the power button for four seconds or longer to shut down the wireless display, and then press the power button
Panasonic CF- | Wireless Display - Page 58
THE SOFTWARE PROGRAM(S) ("PROGRAMS") FURNISHED WITH THIS PANASONIC® PRODUCT ("PRODUCT") ARE LICENSED ONLY TO THE ENDUSER except that you may make one (1) copy of the Programs for backup purposes only in support of your use of the Programs on the single Product which was accompanied by the Programs
Panasonic CF- | Wireless Display - Page 59
F. You may not remove any copyright, trademark or other notice or product identification from the Programs and you must reproduce and include any such notice or product identification on any copy of any Program. YOU MAY NOT REVERSE ASSEMBLE, REVERSE COMPILE, OR MECHANICALLY OR ELECTRONICALLY TRACE
Panasonic CF- | Wireless Display - Page 60
Contrat de licence d'usage limité Le(s) logiciel(s) (les "Logiciels") fournis avec ce produit Panasonic® (le "Produit") sont exclusivement concédés en licence à l'utilisateur ultime ("vous"), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cidessous. En utilisant
Panasonic CF- | Wireless Display - Page 61
machine, de tous les Logiciels ainsi que de la documentation les accompagnant, à la même partie ou détruire les copies non cédées. F. Vous ne pouvez retirer aucune marque de droits d'auteur, marque de commerce ou autre ni aucune identification de produit des Logiciels et vous devez reproduire et
Panasonic CF- | Wireless Display - Page 62
Specifications „ Main Specifications Model No. CPU Memory (ROM/RAM) Display Method Internal LCD Display Wireless LAN Bluetooth LAN Sound Card Slot SD Memory Card*1 Interface Button Pointing Device Power Supply AC Adaptor*3 Battery Pack Operating Time*4 Charging Time*4 Power Consumption*7 Physical
Panasonic CF- | Wireless Display - Page 63
Software Microsoft® Remote Desktop Connection, Citrix® ICA® Client, Microsoft® Internet Explorer 6.0 *1 This slot does not support the MultiMedia card. Operation has been confirmed for Panasonic SD Memory Cards with up to 2 GB capacity. *2 Theoretical value and not the actual speed. The transfer
Panasonic CF- | Wireless Display - Page 64
controls, improper maintenance, modification or service by anyone other than a Factory Service Center or authorized Panasonic Service Dealer, or damage that is other rights which vary from state to state. If a problem with your product develops during or after the warranty period, you may contact our
Panasonic CF- | Wireless Display - Page 65
shall be limited to the replacement, in the United States, of any defective disk or other media which is returned to Panasonic's Authorized Service Center, together with a copy of the purchase receipt, within the aforesaid warranty period. Anything in the foregoing to the contrary notwithstanding
Panasonic CF- | Wireless Display - Page 66
Time Zone, Mon. - Fri. (excluding holidays) for instructions on how to obtain service. A purchase receipt or other proof of date of original you chose your own transportation carrier. SOFTWARE MEDIA LIMITED WARRANTY Coverage - Panasonic Canada Inc. ("PCI") warrants to you, the first end user
Panasonic CF- | Wireless Display - Page 67
and workmanship under normal use in Canada for a period of sixty (60) days from date of receipt as evidenced by your purchase receipt for your Panasonic Computer product. THIS IS THE ONLY WARRANTY THAT PCI MAKES RESPECTING THE SOFTWARE MEDIA. PCI does not warrant the software. Please refer to the
Panasonic CF- | Wireless Display - Page 68
, Secaucus, NJ 07094 Ontario L4W 2T3 Importer's name & address pursuant to the EU GPSD directive 2001/95/EC/Art.5 Panasonic Computer Products Europe, Panasonic Marketing Europe GmbH Hagenauer Straße 43 65203 Wiesbaden Germany © 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved