Panasonic CF- Wireless Display - Page 21
Make the network setting.
UPC - 092281867281
View all Panasonic CF- manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
6 Make the network setting. Before making the settings for the wireless display, check the following server set- tings. z Is the remote desktop allowed to use? z IP address and subnet mask (if the name server is inside the network, use the server name instead.) z User name and password When making connections with a LAN z For the following operation, make sure the LAN is enabled. Tap [ETHERNET1], and then tap [File] - [Enable]. When making connections with a wireless LAN The icon will change from to . A Double-tap [ETHERNET1]. A Double-tap [WIRELESS LAN1]. B Tap the [IP address] tab, and set an IP address and subnet mask. If DHCP is available on the network If DHCP is not available on the network Select [Obtain an IP address via DHCP]. Select [Specify an IP address], and enter the IP address, subnet mask and if necessary, default gateway. C Tap [OK]. z When making connections with a wireless LAN A Double-tap on the desktop, and then tap [Wireless LAN]. B Tap the [Wireless Information] tab, and then tap the access point from the list. Now, select settings as follows according to your own network environment. C Tap [Connect]. 21