Panasonic DMR-HW100EBK Operating Instructions - Page 74
Sound, Display
View all Panasonic DMR-HW100EBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Convenient functions Changing the unit's settings (Setup) Sound Setup Sound Sound Dynamic Range Compression Downmix Digital Audio Output Audio Delay ∫ Dynamic Range Compression To lower the dynamic range for playback. (e.g., at night) ≥This does not work depending on broadcasts and recorded titles. ¾ Dolby Digital / Dolby Digital Plus ≥When using the DIGITAL AUDIO OUT terminal, there are following restrictions. -When "Bitstream" is selected, Dolby Digital Plus audio is output as Dolby Digital. -When "PCM" is selected, audio is output as Down-mixed 2ch PCM. ¾ MPEG ¾ HE-AAC Select the audio signal to output. ≥Select "PCM" when the connected equipment cannot decode the respective audio format. ≥Not making the proper settings may result in noise. ∫ Downmix Select the downmix system of multi-channel to 2-channels sound. ≥Select "Surround encoded", when the connected equipment supports the virtual surround function. ≥There is no effect on "Bitstream" via HDMI AV OUT and DIGITAL AUDIO OUT terminal. ≥The audio will be output in "Stereo" during AVCHD playback. ∫ Digital Audio Output Sound ∫ Audio Delay Mis-sync between the video and audio is corrected by delaying the audio output. Display Setup Display Display On-Screen Information Unit's Display Screen Saver Digital Audio Output Digital Audio Output PCM Down Conversion Dolby Digital / Dolby Digital Plus MPEG HE-AAC ¾ PCM Down Conversion Select how to output audio with a sampling frequency of 96 kHz. ≥It will be converted to 48 kHz regardless of the setting when the signals have a sampling frequency of over 96 kHz. ≥If "Off" is selected, signals are output as 96 kHz ≥If "On" is selected, signals are converted to 48 kHz. (Choose when the connected equipment cannot process signals with a sampling frequency of 96 kHz.) ∫ On-Screen Information Select the approximate time until the channel information screen (> 24) disappears automatically. ∫ Unit's Display Changes the brightness of the unit's display. ∫ Screen Saver This is to prevent burn-in on the screen. ≥If "On" is selected, the masked-off area on the screen becomes grey. Depending on the condition of the unit (Connection, Setting) the masked-off area on the screen becomes grey. 74 VQT3F57