Panasonic HDC DX1 Hd Video Camera - English / Spanish - Page 30

DISC AND CARD HANDLING, How to hold a disc or card, When inserting/removing a disc - case

Page 30 highlights

Before using Disc and card handling ª How to hold a disc or card Do not touch the recorded surface or the terminal surface. ª When inserting/removing a disc Do not allow fingerprints or dirt to get on the recording/playback side of the disc. ≥If there are scratches or dirt (e.g. dust or fingerprints) on the recording/playback side of the disc, normal recording/playback may not be possible and the following may occur: - Recording/playback is not possible. - The image or the sound is interrupted or stops momentarily. - Noise appears on the image or the sound. - The message "NO DATA.", "PLEASE CHECK THE DISC.", "CHECK THE DISC AFTER PUSHING THE RESET SWITCH TO REPAIR THE DISC.", etc. appears. ª If there is dirt on the disc ≥Clean it with the supplied disc cleaning cloth. Wipe the disc from the center to the outer edge to remove the dirt. Do not use force when wiping the disc as it may scratch it. Also, do not use solvents (thinner, water, antistatic agent, detergent etc.). ª Handling precautions ≥Be careful about scratches and dirt. ≥Do not attach labels or stickers to discs. (This may cause disc warping and un-balanced rotation, rendering it unusable.) ≥Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens or other hard writing implements. ≥Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. ≥Do not use scratch-proof protectors or covers. ≥Do not drop, stack, or impact discs. Do not place objects on them. ≥Do not use the following discs: - Discs with exposed adhesive from removed stickers or labels. - Discs that are badly warped or cracked. - Irregularly shaped discs, such as heart shapes. ≥Do not expose the terminals of the card to water, garbage or dust. ≥Do not place in the following areas: - In direct sunlight. - In very dusty or humid areas. - Near a heater. - Locations susceptible to significant difference in temperature (condensation can occur). - Where static electricity or electromagnetic waves occur. ≥To protect discs and cards, return them to their cases when you are not using them. 30 LSQT1093

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144

30
LSQT1093
Before using
Disc and card handling
ª
How to hold a disc or card
Do not touch the recorded surface or the terminal
surface.
ª
When inserting/removing a disc
Do not allow fingerprints or dirt to get on the
recording/playback side of the disc.
If there are scratches or dirt (e.g. dust or
fingerprints) on the recording/playback side of
the disc, normal recording/playback may not be
possible and the following may occur:
– Recording/playback is not possible.
– The image or the sound is interrupted or
stops momentarily.
– Noise appears on the image or the sound.
– The message “NO DATA.”, “PLEASE
CHECK THE DISC.”, “CHECK THE DISC
AFTER PUSHING THE RESET SWITCH TO
REPAIR THE DISC.”, etc. appears.
ª
If there is dirt on the disc
Clean it with the supplied disc cleaning cloth.
Wipe the disc from the center to the outer edge
to remove the dirt. Do not use force when
wiping the disc as it may scratch it. Also, do not
use solvents (thinner, water, antistatic agent,
detergent etc.).
ª
Handling precautions
Be careful about scratches and dirt.
Do not attach labels or stickers to discs. (This
may cause disc warping and un-balanced
rotation, rendering it unusable.)
Write on the label side of the disc only with a
soft, oil-based felt pen. Do not use ballpoint
pens or other hard writing implements.
Do not use record cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
Do not use scratch-proof protectors or covers.
Do not drop, stack, or impact discs. Do not
place objects on them.
Do not use the following discs:
– Discs with exposed adhesive from removed
stickers or labels.
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
Do not expose the terminals of the card to
water, garbage or dust.
Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant
difference in temperature (condensation can
occur).
– Where static electricity or electromagnetic
waves occur.
To protect discs and cards, return them to their
cases when you are not using them.