Panasonic HDC DX1 Hd Video Camera - English / Spanish - Page 33
CONNECTING TO THE AC OUTLET, input terminal DC IN 7.3V. - spares
UPC - 037988255207
View all Panasonic HDC DX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setup ≥The recordable times will vary depending on the status of use. These times are approximations. The recordable time will become shorter in the following cases: - When you use both the viewfinder and the LCD monitor simultaneously while rotating the LCD monitor frontward to record yourself, using the 0 Lux MagicPix function, etc. - When you use this unit with the LCD monitor lit up by pressing the POWER LCD button. ≥The batteries heat up after use or charging. This unit will also heat up while being used. This is not a malfunction. ≥Be aware that the operating time of the battery will become shorter in low temperatures. We recommend charging a spare battery for use when recording. ª About the remaining battery capacity indication The remaining battery capacity is displayed in minutes when using the Panasonic battery that you can use for this unit. It may take time to display the remaining battery capacity. ≥The maximum amount of remaining battery capacity able to be indicated is 240 minutes. If the actual remaining time exceeds 240 minutes, the indication will stay green and will not change until the remaining time falls below 240 minutes. ≥Depending on the conditions of use, the time displayed on the remaining battery capacity indication will change so use it as an approximation. ≥When turning the mode dial to switch modes, the time indication will turn off in order to recalculate the remaining battery capacity time. ≥When using batteries made by other companies the remaining battery capacity will not be shown. Connecting to the AC outlet 90min ≥The display changes as the battery capacity reduces. # # # # . If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. ≥The remaining battery capacity may not be displayed correctly where the temperature is low or high or if the battery was not used for a long period of time. To correctly display the remaining battery capacity, recharge the battery, discharge it and then charge it again. (Even if this operation is performed, it may not be possible to display the remaining battery capacity correctly if the battery was used for a long period of time where the temperature is low or high or if the battery was repeatedly charged.) 1 Connect the AC cable to the AC adaptor and the AC outlet. 2 Connect the DC cable to the AC adaptor. 3 Connect the DC cable to the DC input terminal DC IN 7.3V. ≥Do not use the AC cable with any other equipment as it is designed only for this unit. Do not use the AC cable from other equipment with this unit. ≥While the DC cable is connected to the AC adaptor, the battery will not charge. 33 LSQT1093