Panasonic HDC SD5 Hd Sd Camcorder - Multi Language - Page 109
Rec Lamp], Display], Power Save], Beep Sound], Initial Set], Demo Mode], Menus Related To [advanced]
UPC - 037988831883
View all Panasonic HDC SD5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Others Menus related to [ADVANCED] ª [REC LAMP] ≥ [OFF] ≥ [ON] The recording lamp lights up during recording and flashes when the unit receives a signal from the remote control or when the self-timer is counting down. When this is set to [OFF], it does not light during recording. Menus related to [SETUP] ª [DISPLAY] ≥ [OFF] ≥ [ON] The screen indications are selected as shown in the illustration below. [OFF] JAN 1 2008 [ON] 1 R30min AUTO 0h00m00s 60min J1A5.N121.2200068 ª [POWER SAVE] ≥ [OFF] ≥ [5 MINUTES] [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life. To use this unit, turn it on again. ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. jWhen using the AC adaptor jWhen the unit is connected to a computer, printer or DVD burner with the USB cable. jWhen PRE-REC is used ª [BEEP SOUND] ≥ [OFF] ≥ [ON] This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 1 Beep When you start recording When you turn on the power When this unit is recognized by the computer or the printer etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps/4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 112) ª [INITIAL SET] ≥ [YES] ≥ [NO] When there is a menu that cannot be selected due another function or mode being activated, set to [YES] for changing the menu settings back to the default condition. (The language setting cannot be changed back to the default condition.) ª [DEMO MODE] ≥ [OFF] ≥ [ON] This item is used to start the unit demonstration. (Only when the mode dial is at the position) If you set [DEMO MODE] to [ON] without inserting an SD card, the demonstration automatically starts. If any operation takes place, the demonstration is canceled. However if no operations take place for approx. 10 minutes, the demonstration automatically starts again. To stop the demonstration, set [DEMO MODE] to [OFF] or insert an SD card. For normal use, set [DEMO MODE] to [OFF]. 109 VQT1H62