Panasonic HDC SD5 Hd Sd Camcorder - Multi Language - Page 57

Recording To cancel the guide line function Press the MENU button, then select [BASIC] or [PLAY SETUP] # [GUIDE LINES] # [OFF] and press the cursor button. ≥ The guide lines do not appear on the images actually recorded. ≥ The guidelines are not displayed while rotating the LCD monitor frontward to record yourself. Wind noise reduction function This is for reducing the wind noise coming into the microphone when recording. ¬ Rotate the mode dial to select . Press the MENU button, then select [VIDEO] # [WIND CUT] # [ON] and press the cursor button. To cancel the wind noise reduction function Press the MENU button, then select [VIDEO] # [WIND CUT] # [OFF] and press the cursor button. ≥ This function's default setting is [ON]. ≥ The wind noise reduction depends on the wind strength. (The stereo effect may be reduced if this function is activated in strong winds. However, the stereo effect is automatically restored when then the wind weakens.) Microphone level This is for adjusting the microphone input level. When recording, the input level from the built-in microphones can be adjusted. ¬ Rotate the mode dial to select . 1 Press the MENU button, then select [VIDEO] # [MIC LEVEL] # [SETrAGC] or [SET] and press the cursor button. AGC: Auto Gain Control [AUTO]: AGC is activated, and the recording level is adjusted automatically. [SETrAGC]: The desired recording level can be set. AGC will also be activated to reduce the amount of sound distortion. [SET]: AGC is not activated and so natural recording can be performed. 2 Move the cursor button left or right to adjust the microphone input level. A B C A Left B Right C Microphone input level ≥ A gain value for each of the 2 built-in microphones is displayed. (The input level of the microphones cannot be set individually.) 57 VQT1H62