Panasonic KX-TA30850 User Manual

Panasonic KX-TA30850 Manual

Get Panasonic KX-TA30850 PDF manuals and user guides View all Panasonic KX-TA30850 manuals
Add to My Manuals
Save this manual to your list of manuals

Panasonic KX-TA30850 manual content summary:

  • Panasonic KX-TA30850 | User Manual - Page 1
    Telephone Systems Panasonic KX-TA308 www.voicesonic.com Phone: 877-289-2829 Advanced Hybrid System User Manual Panasonic KX-TA308, KXTA308, KX TA308, TA308, KX-TA30820, KXTA30820, KX-TA30830, KXTA30830, KX-TA30850, KXTA30850 KX-TA308 Model No. Please read this manual before connecting the
  • Panasonic KX-TA30850 | User Manual - Page 2
    Thank you for purchasing this Panasonic Telephone System. System Components Model No. Service Unit KX-TA308 Telephones Optional Equipment KX-TA30820 KX-TA30830 KX-TA30850 KX-T7885 KX-TD7895 KX-T30865 Description Advanced Hybrid System (Main Unit) Proprietary Telephone Proprietary Telephone with
  • Panasonic KX-TA30850 | User Manual - Page 3
    trouble, disconnect the unit from the telephone line. Plug the telephone directly into the telephone line. If the telephone operates properly, do not reconnect the unit to the line until the problem has been repaired by an authorized Panasonic Factory Service than a Panasonic handset for KX-TA308 use
  • Panasonic KX-TA30850 | User Manual - Page 4
    Introduction Who Should Use This Manual This manual is designed for users of an Advanced Hybrid System, model number KX-TA308. It is to be used after the system is installed and System Programming is completed. The focus is Proprietary Telephones (PTs); KX-TA30820/KX-TA30830/KXTA30850, Single Line
  • Panasonic KX-TA30850 | User Manual - Page 5
    conversation at an extension/outside (CO) line. s Local Carrier-Based Voice Mail Service informs you with the lit Message/Ringer Lamp when a message is left in (KX-T7885 and KX-TD7895) give you the freedom to move about your residence and still have the powerful features of Panasonic proprietary
  • Panasonic KX-TA30850 | User Manual - Page 6
    programming titles are noted for your reference. System Programming should be done by the extension which is connected to jack number 01. A KX-TA30830 can be used for this programming. Station Programming is individual programming at your own proprietary telephone (PT). You can customize the
  • Panasonic KX-TA30850 | User Manual - Page 7
    -TA30830 only 1-13 BACKLIGHT Adjustment (KX-TA30830 only 1-13 Volume Control - Handset Receiver/Headset/Ringer/Speaker 1-14 LED Indication ...1-15 Section 2 Station Programming (Personal Programming) .... 2-1 2.1 Station Programming Instructions 2-2 2.2 Station Programming (Personal Programming
  • Panasonic KX-TA30850 | User Manual - Page 8
    Line Preference - Outgoing 2-22 Idle Line Preference - Outgoing 2-23 Prime Line Preference - Outgoing 2-23 Self-Extension Number Confirmation (KX-TA30830 only 2-24 Station Programming Data Default Set 2-25 Section 3 Telephone Features 3-1 3.1 Basic Operations 3-2 Making Calls ...3-2 Intercom
  • Panasonic KX-TA30850 | User Manual - Page 9
    Deny 3-69 External Feature Access 3-70 F Flash ...3-71 H Hands-free Answerback (- for KX-TA30820/KX-TA30830 only 3-72 Hands-free Operation (- for KX-TA30820/KX-TA30830 only 3-73 I Intercom Calling ...3-74 L Local Carrier-Based Voice Mail Service 3-75 Lockout ...3-76 Log-In/Log-Out ...3-76 9
  • Panasonic KX-TA30850 | User Manual - Page 10
    Contents M Message Waiting ...3-78 Message Waiting for Another Extension 3-81 Message Waiting for Another Extension Lock 3-83 Microphone Mute (- for KX-TA30820/KX-TA30830 only 3-84 Mixed Station Dialing 3-84 O One-Touch Dialing 3-85 Operator Call ...3-86 Outward Dialing, Line Access - SUMMARY
  • Panasonic KX-TA30850 | User Manual - Page 11
    (Day/Night/Lunch) Service 3-112 Timed Reminder Class 3-116 W Walking COS ...3-117 3.3 Operator/Manager Service Features 3-118 Manager Programming (Manager only 3-119 Call Log the Common Area Treatment 3-125 Time (Day/Night/Lunch) Service Setting 3-126 Timed Reminder, Remote (Wake-Up Call
  • Panasonic KX-TA30850 | User Manual - Page 12
    12
  • Panasonic KX-TA30850 | User Manual - Page 13
    Section 1 PT Overview Contents 1.1 Configuration 1-2 Location of Controls 1-3 Connection 1-5 Feature Buttons 1-6 Initial Settings 1-13 LED Indication 1-15
  • Panasonic KX-TA30850 | User Manual - Page 14
    1.1 Configuration Panasonic Proprietary Telephones (PTs) are available to utilize various features of the KX-TA308 System, in addition to supporting basic telephone services (making and receiving calls). There are three PT models. Display KX-TA30820 KX-TA30830 KX-TA30850 None 16 characters/1
  • Panasonic KX-TA30850 | User Manual - Page 15
    1.1 Configuration Location of Controls s KX-TA30820 PROGRAM Button FWD/DND Button CONF (Conference) Button MESSAGE Button PAUSE Button REDIAL Button Flexible CO Buttons TRANSFER Button HOLD Button s KX-TA30830 PROGRAM Button FWD/DND Button CONF (Conference) Button INTERCOM Button FLASH/RECALL
  • Panasonic KX-TA30850 | User Manual - Page 16
    1.1 s KX-TA30850 PROGRAM Button FWD/DND Button CONF (Conference) Button INTERCOM Button Key MONITOR Button RINGER VOLUME Selector Adjusts the volume level of the ringer. BACKLIGHT Control Selector (KX-TA30830 only) Adjusts the brightness of
  • Panasonic KX-TA30850 | User Manual - Page 17
    1.1 Connection Connect as shown. The telephone line cord (included) Configuration To the main unit (TO MAIN UNIT/PABX) < Back view> CAUTION Ensure the cord is inserted in the groove to prevent damage to the connector. Headset PT Overview 1-5
  • Panasonic KX-TA30850 | User Manual - Page 18
    cannot be changed. The following table lists the fixed buttons located on each PT model. Feature Button TA30830 TA30820 TA30850 AUTO ANSWER/MUTE ✔ ✔ AUTO DIAL/STORE ✔ ✔ ✔ CONF ✔ ✔ ✔ FLASH/RECALL❖ ✔ ✔ ✔ FWD/DND ✔ ✔ ✔ HOLD❖ ✔ ✔ ✔ INTERCOM ✔ ✔ ✔ MESSAGE❖ ✔ ✔ ✔ MONITOR
  • Panasonic KX-TA30850 | User Manual - Page 19
    1.1 Configuration Usage AUTO ANSWER/MUTE Button (KX-TA30820/KX-TA30830) Used for answering an extension automatically, Lamp lights when a message waiting indication is left at your extension. MONITOR Button (KX-TA30850) Used for a hands-free dialing operation. PAUSE Button Inserts a pause in speed
  • Panasonic KX-TA30850 | User Manual - Page 20
    ) Used to adjust the volume and the display contrast or select desired items for each function. Volume Key (KX-TA30820/KX-TA30850) Used to adjust the volume. Message/Ringer Lamp Used to inform you visually that you have an incoming call or message from an external
  • Panasonic KX-TA30850 | User Manual - Page 21
    1.1 Configuration Flexible Buttons Flexible Buttons do not have specific features permanently assigned to them. Features are assigned to Flexible Buttons through Station Programming. "Flexible Button Assignment" is addressed in Station Programming (Section 2). The two types of Flexible Buttons are
  • Panasonic KX-TA30850 | User Manual - Page 22
    Paging -All Paging -All Paging -All Paging -All Paging -All Paging -All Paging -All Ext. : Extension * CO button numbers above 3 are not indicated on the KX-TA308XX series telephones. 12 11 10 9 8 7 6 5 4 1-10 PT Overview
  • Panasonic KX-TA30850 | User Manual - Page 23
    1.1 Configuration Line Access Buttons One of the following three types of CO buttons must be used to seize an outside (CO) line when making a call. • Group-CO (G-CO) button • Other-CO (O-CO) button • Single-CO (S-CO) button Conditions • A Flexible CO button can be assigned as a Line Access Button
  • Panasonic KX-TA30850 | User Manual - Page 24
    1.1 Configuration Other-CO (O-CO) Button Outside (CO) lines which are not assigned to S-CO or G-CO buttons can be assigned to a Flexible CO button on a proprietary telephone. The assigned button serves as the O-CO button. An incoming call, on assigned outside (CO) lines, arrives at the O-CO button.
  • Panasonic KX-TA30850 | User Manual - Page 25
    may be initialized to default settings after the telephone line cord is pulled off or the main unit's power is interrupted. BACK LIGHT Adjustment (KX-TA30830 only) The BACKLIGHT Control Selector is used to adjust the brightness of the BACKLIGHT. PT 21 0 BACKLIGHT Slide the lever of BACKLIGHT Control
  • Panasonic KX-TA30850 | User Manual - Page 26
    While using a handset or headset *** Press Up or Down. (-volume level 3) - Adjusting the headset receiver is available only for the KX-TA30830. * The above settings may be initialized to default settings after the telephone line cord is pulled off or the main unit's power is
  • Panasonic KX-TA30850 | User Manual - Page 27
    exclusive hold, (2) outside-to-outside (CO-toCO) line call, or (3) Conference, Unattended. Incoming call Other-use Other-hold* Local Carrier-Based Voice Mail Service* BLF on DSS Button - Item with an * is only available on a Single-CO button. The Busy Lamp Field (BLF) indicator button is red when
  • Panasonic KX-TA30850 | User Manual - Page 28
    1.1 Configuration LED Indication and LCD on the KX-T7885/KX-TD7895 The LED is off and LCD date and time line is not displayed while the phone is idle. To activate the LED and LCD, press the button specified in the "Operating Instructions" for the wireless phone. 1-16 PT Overview
  • Panasonic KX-TA30850 | User Manual - Page 29
    Section 2 Station Programming (Personal Programming) Contents 2.1 Station Programming Instructions 2-2 2.2 Station Programming (Personal Programming 2-6
  • Panasonic KX-TA30850 | User Manual - Page 30
    2.1 Station Programming Instructions Station Programming allows you, the proprietary telephone (PT) user, to program certain features from your telephone individually. During the programming mode, your telephone is busy
  • Panasonic KX-TA30850 | User Manual - Page 31
    2.1 Station Programming Instructions To confirm the assigned data -Be sure that you - 4: Intercom Alert Assignment - 5: Call Waiting Tone Type Assignment - 6: Self-Extension Number Confirmation (KX-TA30830 only) - 7: Extension Password Set (Manager only) - 8: Electronic Station Lockout - CANCEL ALL
  • Panasonic KX-TA30850 | User Manual - Page 32
    2.1 Station Programming Instructions To confirm the assigned data on the Flexible button - Be sure outline contains the buttons and program access numbers used for Station Programming. Detailed operating instructions are explained in this section. 2-4 Station Programming (Personal Programming)
  • Panasonic KX-TA30850 | User Manual - Page 33
    2.1 Station Programming Instructions Station Programming Outline PROGRAM MESSAGE CO CO * See the "Operator/Manager Service Features" (Section 3.3). MESSAGE 1 2 3 4 5 6 7 8 0 # (Station Programming) 2 One-Touch Dialing Button 1 Direct Station Selection (DSS) Button 3 Conference (CONF) Button
  • Panasonic KX-TA30850 | User Manual - Page 34
    2.2 Station Programming (Personal Programming) Call Waiting Tone Type Assignment Allows you to select the call waiting tone type (Tone 1 or Tone 2). - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT 5 1 or 2 Dial 5. Dial 1 or 2. 1 : to select Call Waiting
  • Panasonic KX-TA30850 | User Manual - Page 35
    2.2 Station Programming (Personal Programming) Flexible Button Assignment Each Flexible button on your telephone and the console can be assigned as various feature buttons such as a DSS Button, FWD/DND Button, etc. The assignable features are limited by the button type. Please refer to "Flexible
  • Panasonic KX-TA30850 | User Manual - Page 36
    PT • System Programming determines who can assign the Caller ID Indication - Common button. Programming Reference • System Programming - Installation Manual [909] Common Area Call Log Check Assignment Feature References Call Information/Log, Incoming Call Log, Incoming 2-8 Station Programming
  • Panasonic KX-TA30850 | User Manual - Page 37
    PT • System Programming determines who can assign the Caller ID Selection - Common button. Programming Reference • System Programming - Installation Manual [909] Common Area Call Log Check Assignment Feature References Call Information/Log, Incoming Call Log, Incoming Station Programming (Personal
  • Panasonic KX-TA30850 | User Manual - Page 38
    2.2 Station Programming (Personal Programming) Conference (CONF) Button (Assignment) Allows you to assign a Flexible CO button as the Conference (CONF) button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO Press the desired Flexible CO button you wish to
  • Panasonic KX-TA30850 | User Manual - Page 39
    2.2 Station Programming (Personal Programming) Direct Station Selection (DSS) Button (Assignment) Allows you to assign a Flexible CO button as a DSS button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO 1 Press the desired Flexible CO button you wish
  • Panasonic KX-TA30850 | User Manual - Page 40
    2.2 Station Programming (Personal Programming) FWD/DND Button (Assignment) Allows you to assign a Flexible CO button as the FWD/DND button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO 4 Press the desired Flexible CO button you wish to assign as the
  • Panasonic KX-TA30850 | User Manual - Page 41
    2.2 Station Programming (Personal Programming) Log-In/Log-Out Button (Assignment) Allows you to assign a Flexible CO button as the Log-In/Log-Out button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO 8 Press the desired Flexible CO button you wish to
  • Panasonic KX-TA30850 | User Manual - Page 42
    2.2 Station Programming (Personal Programming) One-Touch Dialing Button (Assignment) Allows you to assign a Flexible button (CO, MESSAGE) as a One-Touch Dialing button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT ) CO MESSAGE )+ 2 desired number AUTO
  • Panasonic KX-TA30850 | User Manual - Page 43
    2.2 Station Programming (Personal Programming) Other-CO (O-CO) Button (Assignment) Allows you to assign a Flexible CO button as the Other-CO button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO Press the desired Flexible CO button you wish to assign as
  • Panasonic KX-TA30850 | User Manual - Page 44
    2.2 Station Programming (Personal Programming) SAVE Button (Assignment) Allows you to assign a Flexible CO button as the SAVE button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO AUTO DIAL 5 STORE Press the desired Flexible CO button you wish to assign
  • Panasonic KX-TA30850 | User Manual - Page 45
    2.2 Station Programming (Personal Programming) Single-CO (S-CO) Button (Assignment) Allows you to assign a Flexible CO button as a Single-CO button. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT CO 0 Press the desired Flexible CO button you wish to assign
  • Panasonic KX-TA30850 | User Manual - Page 46
    2.2 Station Programming (Personal Programming) Intercom Alert Assignment Allows you to select the alert mode (tone/voice) when receiving an intercom (extension) call. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT 4 Dial 4. 1 or 2 Dial 1 or 2. 1 : to select
  • Panasonic KX-TA30850 | User Manual - Page 47
    doesn't ring, the CO indicator will flash. If you want to answer the outside call, press the flashing CO button. Programming Reference • System Programming - Installation Manual [408]-[410] Flexible Ringing Assignment - Day/Night/Lunch Station Programming (Personal Programming) 2-19
  • Panasonic KX-TA30850 | User Manual - Page 48
    2.2 Station Programming (Personal Programming) Preferred Line Assignment - Incoming Allows you to select the method used to answer incoming outside calls from the following three line preferences. 1.) No Line Preference 2.) Ringing Line Preference (- default) 3.) Prime Line Preference Follow the
  • Panasonic KX-TA30850 | User Manual - Page 49
    2.2 Station Programming (Personal Programming) Ringing Line Preference - Incoming (Assignment) When you go off-hook, you can answer any call ringing at your telephone. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT 2 AUTO DIAL 2 STORE Dial 2. Dial 2.
  • Panasonic KX-TA30850 | User Manual - Page 50
    2.2 Station Programming (Personal Programming) Preferred Line Assignment - Outgoing Allows you to select the desired outgoing line preference to originate calls from the following three line preferences. 1.) No Line Preference (- default) 2.) Idle Line Preference 3.) Prime Line Preference Follow
  • Panasonic KX-TA30850 | User Manual - Page 51
    2.2 Station Programming (Personal Programming) Idle Line Preference - Outgoing (Assignment) When going off-hook, you are connected to an idle line. - Be sure that you are in the Station Programming mode. Press the PROGRAM button. PT 1 Dial 1. 2 Dial 2. AUTO DIAL STORE Press STORE. • The
  • Panasonic KX-TA30850 | User Manual - Page 52
    2.2 Station Programming (Personal Programming) Self-Extension Number Confirmation (KX-TA30830 only) Allows you to display your jack and extension number. - Be sure that you are in the Station Programming mode. Press the PROGRAM button.
  • Panasonic KX-TA30850 | User Manual - Page 53
    2.2 Station Programming (Personal Programming) Station Programming Data Default Set Allows you to return each of the following programmable items to their default settings. a) Call Waiting Tone Type Assignment (default: Tone 1) b) Intercom Alert Assignment (default: Ring-Calling (Tone Call)) c)
  • Panasonic KX-TA30850 | User Manual - Page 54
    2-26 Station Programming (Personal Programming)
  • Panasonic KX-TA30850 | User Manual - Page 55
    3-2 Making Calls 3-2 Receiving Calls 3-3 3.2 Telephone Features 3-4 3.3 Operator/Manager Service Features 3-118 When setting "Idle Line Preference - Outgoing" or " handset. To change the time, refer to System Programming in the Installation Manual. Refer to Section 4 "Tone List" for tones.
  • Panasonic KX-TA30850 | User Manual - Page 56
    3.1 Basic Operations Making Calls Intercom Calling Allows you to make a call to another extension. Any Telephone Lift the handset or press SP-PHONE/MONITOR. extension number or Enter an extension number (100 through 199). or press the flexible button assigned as a DSS button. • The INTERCOM
  • Panasonic KX-TA30850 | User Manual - Page 57
    Hands-free Operation" feature. Programming References • Station Programming (Section 2) Preferred Line Assignment - Incoming • System Programming - Installation Manual [400] Outside (CO) Line Connection Assignment [408]-[410] Flexible Ringing Assignment - Day/Night/Lunch Feature References Answering
  • Panasonic KX-TA30850 | User Manual - Page 58
    A 3.2 Telephone Features Absent Message Capability Allows you to show the reason for your absence, if the calling extension uses a Panasonic proprietary telephone with a display. This way the caller can know when or where you can be reached. You can choose one of six messages. Message
  • Panasonic KX-TA30850 | User Manual - Page 59
    3.2 Telephone Features A Setting Message 1. "Will Return Soon" Any Telephone 751 Lift the handset or press SP-PHONE/MONITOR. Dial 751#. Confirmation tone and dial tone Hang up or press SP-PHONE/MONITOR. • Single line telephone users can dial "0" instead of "#". Message 2. "Gone Home" Any
  • Panasonic KX-TA30850 | User Manual - Page 60
    A 3.2 Telephone Features Message 5. "Out until %% / %%" (month/day) Any Telephone Lift the handset or press SP-PHONE/ MONITOR. 755 month day Dial 755. Enter the month (01 through 12) and day (01 through 31). Dial #. Confirmation tone and dial tone • Single line telephone users can dial "0"
  • Panasonic KX-TA30850 | User Manual - Page 61
    3.2 Telephone Features A Account Code Entry An account code is used to identify outside calls for accounting and billing purposes. The account code is appended to the "Station Message Detail Recording (SMDR)" call record. For incoming outside calls, account codes are not required. For outgoing
  • Panasonic KX-TA30850 | User Manual - Page 62
    four digits (0 through 9). FLASH/RECALL, PAUSE, etc., cannot be used. Programming References • System Programming - Installation Manual [310] Account Codes [601]-[603] TRS - Class of Service (COS) Assignment - Day/Night/Lunch [605] Account Code Entry Mode [805] SMDR Account Code Selection Feature
  • Panasonic KX-TA30850 | User Manual - Page 63
    -CO (S-CO) button. These can be assigned to Flexible CO buttons by Station Programming. PT • This feature is not available for the KX-TA30850. Programming References • Station Programming (Section 2) Flexible Button Assignment - Group-CO (G-CO) Button, Other-CO (O-CO) Button, Single-CO (S-CO) Button
  • Panasonic KX-TA30850 | User Manual - Page 64
    A 3.2 Telephone Features Automatic Callback Busy (Camp-On) Allows you to receive callback ringing when the dialed line becomes idle. When you answer the callback ringing; For an extension: The called extension starts ringing without dialing. For an outside (CO) line: The line is seized. Setting
  • Panasonic KX-TA30850 | User Manual - Page 65
    3.2 Telephone Features Answering an outside (CO) line recall Any Telephone If you hear the telephone ringing Lift the handset or press SP-PHONE/MONITOR . Dial tone phone no. Enter the phone number. CO x Free outside (CO) line number A Canceling Any Telephone Lift the
  • Panasonic KX-TA30850 | User Manual - Page 66
    B 3.2 Telephone Features Background Music (BGM) You can listen to background music through the built-in speaker of the telephone. An external music source, such as a radio, can be connected. The music stops whenever a call comes in, a page comes in, or you go off-hook. Setting / Canceling PT When
  • Panasonic KX-TA30850 | User Manual - Page 67
    call and hear a busy tone 1 Dial 1. Wait for an answer and talk. Conditions • To answer from the calling extension, see "Call Waiting" in this manual. • If you hear a reorder tone when you set this feature, this feature cannot be operated with the called party. This feature is only available if
  • Panasonic KX-TA30850 | User Manual - Page 68
    - All Calls" feature from another extension. Conditions • To cancel the Call Forwarding features, refer to "Call Forwarding - CANCEL" in this manual. • Call Forwarding can only be extended to one target telephone. For example, extension A is forwarded to extension B, and if extension B tries
  • Panasonic KX-TA30850 | User Manual - Page 69
    3.2 Telephone Features C PT • A Flexible CO button can be assigned as the FWD/DND button. PT • The lighting patterns of the FWD/DND button are as follows. Off: Both features are not set. Red: DND mode Flashing red slowly: FWD mode PT • You can check the assignment by pressing the FWD/DND button
  • Panasonic KX-TA30850 | User Manual - Page 70
    call is to be forwarded • The FWD/DND indicator flashes red slowly. • Single line telephone users can dial "0" instead of "#". Programming Reference • System Programming - Installation Manual [202] Call Forwarding Start Time 3-16 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 71
    and entering the account code after the line access code in the account code verify-all and forced modes. Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [414]-[416] Outside (CO) Line Mode - Day/Night/Lunch [605] Account
  • Panasonic KX-TA30850 | User Manual - Page 72
    C 3.2 Telephone Features Call Forwarding - Follow Me You can set the "Call Forwarding" feature from the destination extension. This is useful if you forget to set "Call Forwarding - All Calls" before you leave your desk. Setting PT and SLT At the destination extension FWD/DND For a PT 5 7 1
  • Panasonic KX-TA30850 | User Manual - Page 73
    3.2 Telephone Features C Call Forwarding - CANCEL There are two canceling methods for "Call Forwarding". The canceling depends on the Call Forwarding type that has been assigned. Canceling Call Forwarding at your (original) extension PT and SLT Lift the handset or press SP-PHONE/ MONITOR. FWD/
  • Panasonic KX-TA30850 | User Manual - Page 74
    C 3.2 Telephone Features Call Hold Allows you to place a call on hold. To place a call on hold PT During a conversation HOLD Press HOLD. Confirmation tone and dial tone • You may replace the handset. • The corresponding CO or INTERCOM indicator flashes green slowly. SLT During a conversation
  • Panasonic KX-TA30850 | User Manual - Page 75
    be placed on hold at one time. If you want to hold both calls, use the Call Park feature. Programming References • System Programming - Installation Manual [104] Hold Mode Selection [200] Hold Recall Time Feature References Call Hold Retrieve Call Park Hold Alarm/Hold Recall (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 76
    can put multiple calls on exclusive hold. However, with intercom calls, you can put only one call on exclusive hold. Programming Reference • System Programming - Installation Manual [200] Hold Recall Time Feature References Call Hold Hold Alarm/Hold Recall (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 77
    3.2 Telephone Features C Call Hold Retrieve Allows you to retrieve a call that has been placed on hold by another extension. Retrieving an outside call on hold Any Telephone PT At the other extension At the other extension 53 outside (CO) line no. CO Lift the handset or press SP-PHONE/
  • Panasonic KX-TA30850 | User Manual - Page 78
    ID service* calls. If the call is not answered, the call information is automatically recorded. Display Operation (- for the KX-TA30830) telephone number) CO 1 0:01'52 (call duration) * The Caller ID service provides you with the caller's information, such as the name and telephone number,
  • Panasonic KX-TA30850 | User Manual - Page 79
    Assignment - Caller ID Indication Button, Caller ID Selection Button • System Programming - Installation Manual [900] Caller ID Assignment [904] Caller ID Log Priority Selection [906] Caller ID Log Lock, Incoming in the Common Area (3.3 Operator/Manager Service Features) Telephone Features 3-25
  • Panasonic KX-TA30850 | User Manual - Page 80
    C 3.2 Telephone Features Call Log, Incoming If a call is not answered, the incoming outside call information from the Caller ID service*1 is automatically logged in the system and the Caller ID Indication button indicator lights. There are two kinds of call log areas available in the
  • Panasonic KX-TA30850 | User Manual - Page 81
    the caller's information, such as the name and telephone number, on the outside (CO) line assigned to receive Caller ID service calls. Please refer to the Installation Manual. • *2 Default: The call information is logged only when a call is not answered. • You can set to log the call information
  • Panasonic KX-TA30850 | User Manual - Page 82
    C 3.2 Telephone Features Confirming and calling back Display Operation (- for the KX-TA30830) When the Caller ID Indication - Personal button indicator is red, there are new calls logged in the personal area. When the Caller ID Indication -
  • Panasonic KX-TA30850 | User Manual - Page 83
    3.2 Telephone Features C 003:0011223344 If the information is stored in log 003, 003:BOB HANKS - caller's name 003:0011223344 - caller's number 003:Oct30 09:00P - date and time • Only twelve digits (or characters) of caller's number (or name) can be displayed even though sixteen digits
  • Panasonic KX-TA30850 | User Manual - Page 84
    C 3.2 Telephone Features Confirming the number of logged calls PT - In the Personal Area Press Caller ID Selection - Personal button while on-hook. New:002 Old:003 • The above information will be displayed for 3 seconds. - In the Common Area Press Caller ID Selection - Common
  • Panasonic KX-TA30850 | User Manual - Page 85
    Indication Button Caller ID Selection Button • System Programming - Installation Manual [900] Caller ID Assignment [901] Caller ID Area Code - CLEAR ALL (3.3 Operator/Manager Service Features) Call Log Lock, Incoming in the Common Area (3.3 Operator/Manager Service Features) The 301st Call Log,
  • Panasonic KX-TA30850 | User Manual - Page 86
    other extensions (Electronic Station Lockout - CANCEL ALL). Feature References Call Log, Incoming Electronic Station Lockout Call Log Lock, Incoming in the Common Area (3.3 Operator/Manager Service Features) Electronic Station Lockout - CANCEL ALL (3.3 Operator/Manager
  • Panasonic KX-TA30850 | User Manual - Page 87
    3.2 Telephone Features C Call Park Allows you to place a held call into a system parking area so that you can perform other tasks. The parked call can be retrieved by any extension user. Up to ten calls can be parked. PT and SLT During a conversation HOLD For a PT For an SLT 22 parking zone no
  • Panasonic KX-TA30850 | User Manual - Page 88
    to hold more than one intercom call with a PT, or more than one intercom or outside call with an SLT. Programming Reference • System Programming - Installation Manual [200] Hold Recall Time Feature Reference Hold Alarm/Hold Recall (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 89
    up. The tone can be disabled. • If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone. Programming Reference • System Programming - Installation Manual [117] Call Pickup Tone Feature References Call Pickup Deny Doorphone Call Telephone Features 3-35
  • Panasonic KX-TA30850 | User Manual - Page 90
    be disabled. • If a ringing extension sets the Call Pickup Deny feature, you will hear a reorder tone. Programming References • System Programming - Installation Manual [117] Call Pickup Tone [600] Extension Group Assignment Feature References Call Pickup Deny Extension Group (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 91
    3.2 Telephone Features C Call Pickup Deny Allows you to prevent another extension from picking up your calls with the "Call Pickup" feature. Setting / Canceling Any Telephone Lift the handset or press SP-PHONE/MONITOR. 721 720 To set. To cancel. To set: Dial 721#. To cancel: Dial 720#.
  • Panasonic KX-TA30850 | User Manual - Page 92
    call or the dialed extension is not the TAM extension. • A TAM number is the 3-digit extension number of the TAM. Programming Reference • System Programming - Installation Manual [611] TAM (Telephone Answering Machine) Extension 3-38 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 93
    . • Flashing this switch alternates between the callers. Condition • This feature does not work during a doorphone call or paging. Programming Reference • System Programming - Installation Manual [104] Hold Mode Selection Feature References Call Hold Call Hold, Exclusive Telephone Features 3-39
  • Panasonic KX-TA30850 | User Manual - Page 94
    C 3.2 Telephone Features Call Transfer - to Extension Allows you to transfer a received call to another extension. There are two ways. Screened Call Transfer: The destination confirms the transfer before sending. Unscreened Call Transfer: The line is released after transferring the call without
  • Panasonic KX-TA30850 | User Manual - Page 95
    3.2 Telephone Features C Call Transfer using a DSS button Allows you to perform a Screened or Unscreened Call Transfer by using a DSS button. There are two operations, depending on whether or not One-Touch Transfer* is set. * One-Touch Transfer allows you to hold an outside call and transfer it to
  • Panasonic KX-TA30850 | User Manual - Page 96
    hookswitch. Programming References • Station Programming (Section 2) Flexible Button Assignment - Direct Station Selection (DSS) Button • System Programming - Installation Manual [005] One-Touch Transfer Using a DSS Button [104] Hold Mode Selection [201] Transfer Recall Time Feature References Call
  • Panasonic KX-TA30850 | User Manual - Page 97
    CO button whose indicator is flashing slowly to retrieve the call, then repeat the Call Transfer procedure. Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [420] Calling Party Control (CPC) Signal [606] Call Transfer to
  • Panasonic KX-TA30850 | User Manual - Page 98
    C 3.2 Telephone Features Call Waiting During a conversation, a Call Waiting tone informs you that there is a call waiting. You can answer the second call by disconnecting the first call or placing it on hold. Setting / Canceling for outside calls Any Telephone Lift the handset or press SP-PHONE/
  • Panasonic KX-TA30850 | User Manual - Page 99
    3.2 Telephone Features C To talk to the new party by terminating the current call PT While hearing a Call Waiting tone INTERCOM CO or Press the flashing CO or INTERCOM. Talk to the new caller. SLT While hearing a Call Waiting tone Hang up. Lift the handset. Talk to the new caller. • The
  • Panasonic KX-TA30850 | User Manual - Page 100
    up; then take the new call. Programming References • Station Programming (Section 2) Call Waiting Tone Type Assignment • System Programming - Installation Manual [104] Hold Mode Selection Feature References Busy Station Signaling (BSS) Call Park Call Waiting from a Central Office Data Line Security
  • Panasonic KX-TA30850 | User Manual - Page 101
    . SLT • If "Hold-3" is assigned in System Programming, you must dial "20" after flashing the hookswitch. Programming References System Programming - Installation Manual [104] Hold Mode Selection [110] Flash Key Mode [418] Flash Time Feature Reference External Feature Access Telephone Features 3-47
  • Panasonic KX-TA30850 | User Manual - Page 102
    Office informs you that there is a call waiting. If the Caller ID service provides you with a caller's information, such as the name and telephone the new caller's information will be displayed (flashing) on your extension (KX-TA30830 only) during the assigned time. You can answer the second call by
  • Panasonic KX-TA30850 | User Manual - Page 103
    . PT • A contract with your Central Office may be required for the Call Waiting service. Consult the Central Office for details. Programming Reference System Programming - Installation Manual [908] Caller ID Call Waiting Time Feature Reference Call Information/Log, Incoming Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 104
    C 3.2 Telephone Features Conference During a two-party conversation, you can add a third party to make a three-party conference. The members of a conference may be three extensions, one extension and two outside (CO) lines, or two extensions and one outside (CO) line. To establish a conference PT
  • Panasonic KX-TA30850 | User Manual - Page 105
    3.2 Telephone Features C To leave the conference Any telephone Hang up or press SP-PHONE. • The other two parties may continue their conversation. • If the other two parties are both outside (CO) lines, they will be disconnected. To talk to the original party while holding the third party SLT
  • Panasonic KX-TA30850 | User Manual - Page 106
    the hookswitch. Programming References • Station Programming (Section 2) Flexible Button Assignment - Conference (CONF) Button • System Programming - Installation Manual [104] Hold Mode Selection [105] Conference Tone Feature References Conference, Unattended Executive Busy Override - Extension
  • Panasonic KX-TA30850 | User Manual - Page 107
    the Unattended Conference mode, the display will show "CO 2 & CO 3" for fifty seconds before the time-out. Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [606] Call Transfer to an Outside (CO) Line Feature References
  • Panasonic KX-TA30850 | User Manual - Page 108
    can dial "0" instead of "#". Feature References Call Waiting Executive Busy Override - Extension Executive Busy Override - Outside (CO) Line Hold Alarm/Hold Recall (→ See the Installation Manual.) 3-54 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 109
    3.2 Telephone Features D Direct Inward System Access (DISA) Allows an outside caller to access specific extensions or DISA built-in auto attendant (AA) numbers in the system after hearing a short beep, as if the caller is an extension in the system. A pre-assigned DISA security code may be
  • Panasonic KX-TA30850 | User Manual - Page 110
    they will make illegal phone calls using your telephone line, and the cost may be charged to your account. In order to avoid this problem, we strongly recommend the following points: 1: Carefully maintain the secrecy of the password. 2: Specify a complicated password as long and random as you can
  • Panasonic KX-TA30850 | User Manual - Page 111
    or when there is no destination for "Intercept Routing". • This system supports up to ten programmable DISA built-in auto attendant (AA) numbers. you do not need to dial . Programming References • System Programming - Installation Manual [205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit [
  • Panasonic KX-TA30850 | User Manual - Page 112
    D 3.2 Telephone Features Do Not Disturb (DND) Allows you to prevent other parties from disturbing you. Your extension will not receive intercom or outside calls. Setting / Canceling PT and SLT FWD/DND For a PT 4 To set. Lift the handset or press SP-PHONE/ MONITOR. 7 1 For an SLT 0 To cancel
  • Panasonic KX-TA30850 | User Manual - Page 113
    a busy tone after dialing 2, the line is busy. You can use the Automatic Callback Busy (Camp-On) feature. Programming Reference • System Programming - Installation Manual [609] Do Not Disturb Override Feature References Automatic Callback Busy (Camp-On) Do Not Disturb (DND) Telephone Features 3-59
  • Panasonic KX-TA30850 | User Manual - Page 114
    D 3.2 Telephone Features Door Opener Allows you to unlock the door from your telephone. Up to two door openers can be connected to the system. To unlock the door from an assigned extension Any Telephone 55 door opener no. Lift the handset or press SP-PHONE/MONITOR. Dial 55. Enter a door opener
  • Panasonic KX-TA30850 | User Manual - Page 115
    the door opener timer through System Programming. • The door opener will open the door, even if a doorphone is not installed. Programming References • System Programming - Installation Manual [703]-[705] Door Opener Assignment - Day/Night/Lunch [709] Door Opener Time Telephone Features 3-61
  • Panasonic KX-TA30850 | User Manual - Page 116
    D 3.2 Telephone Features Doorphone Call Allows you to have a conversation with a visitor at your doorphone. Up to two doorphones can be connected to the system. Calling an extension from a doorphone Any Doorphone Press the Doorphone button for one second. Wait for an answer and talk. Answering
  • Panasonic KX-TA30850 | User Manual - Page 117
    user can call a doorphone. • Doorphones can also be used for the Room Monitor feature. Programming References • System Programming - Installation Manual [700]-[702] Doorphone Ringing Assignment - Day/Night/Lunch [706] Doorphone Ringing/Tone Pattern Selection [707] Doorphone Access Tone Selection
  • Panasonic KX-TA30850 | User Manual - Page 118
    E 3.2 Telephone Features Electronic Station Lockout Allows you to lock your extension so that other users cannot make outside calls from your extension. This feature also works as Call Log Lock, Incoming in the Personal Area. Locking Any Telephone 77 Lift the handset or press Dial 77. SP-PHONE/
  • Panasonic KX-TA30850 | User Manual - Page 119
    • You can make intercom calls and receive intercom or outside calls at a locked extension. Programming Reference • System Programming - Installation Manual [312] Toll Restriction - Station Lock Boundary Class Feature References Call Log Lock, Incoming in the Personal Area Electronic Station Lockout
  • Panasonic KX-TA30850 | User Manual - Page 120
    a host PBX, you must dial the host PBX line access code after the line access code. Programming References • System Programming - Installation Manual [309] Emergency Dial Number Set [403] Host PBX Access Codes Feature References Account Code Entry Electronic Station Lockout Toll Restriction (→ See
  • Panasonic KX-TA30850 | User Manual - Page 121
    versa, a confirmation tone is sent to all parties. The tone can be disabled. Programming References • System Programming - Installation Manual [105] Conference Tone [608] Executive Busy Override Feature References Conference Data Line Security Executive Busy Override Deny Telephone Features 3-67
  • Panasonic KX-TA30850 | User Manual - Page 122
    versa, a confirmation tone is sent to all parties. The tone can be disabled. Programming References • System Programming - Installation Manual [105] Conference Tone [608] Executive Busy Override Feature References Conference Data Line Security Executive Busy Override Deny 3-68 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 123
    Allow: Busy Ovrde Allow • Single line telephone users can dial "0" instead of "#". Programming Reference • System Programming - Installation Manual [608] Executive Busy Override Feature References Executive Busy Override - Extension Executive Busy Override - Outside (CO) Line Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 124
    hookswitch. Dial 6. • The current call is placed on hold. code Enter the desired service code. Conditions PT • A "Flash Time" must be assigned as required by the host Programming References • System Programming - Installation Manual [110] Flash Key Mode [418] Flash Time Feature Reference Flash
  • Panasonic KX-TA30850 | User Manual - Page 125
    Dial tone phone no. Enter the phone number. Condition • System Programming may be required to perform this feature properly. Programming References • System Programming - Installation Manual [110] Flash Key Mode [418] Flash Time Feature Reference External Feature Access Telephone Features 3-71
  • Panasonic KX-TA30850 | User Manual - Page 126
    H 3.2 Telephone Features Hands-free Answerback (- for KX-TA30820/KX-TA30830 only) Allows you to answer an intercom call without lifting the handset. Setting PT When the SP-PHONE and the AUTO ANSWER/MUTE indicators
  • Panasonic KX-TA30850 | User Manual - Page 127
    3.2 Telephone Features H Hands-free Operation (- for KX-TA30820/KX-TA30830 only) Allows you to dial and to • The hands-free mode is canceled if you do not start dialing within ten seconds. PT • The KX-TA30850 has a MONITOR button instead of a SP-PHONE button. It can be used for hands-free dialing,
  • Panasonic KX-TA30850 | User Manual - Page 128
    the desired DSS button while on-hook. Programming References • Station Programming (Section 2) Flexible Button Assignment - Direct Station Selection (DSS) Button • System Programming - Installation Manual [009] Extension Number Assignment [604] Extension Name Setting 3-74 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 129
    red and the corresponding S-CO button flashes red moderately. PT • If your voice mail service uses a stutter dial tone and the recorded message is over 3 minutes long, in some cases the Feature Reference Local Carrier-Based Voice Mail Service (→ See the Installation Manual) Telephone Features 3-75
  • Panasonic KX-TA30850 | User Manual - Page 130
    L 3.2 Telephone Features Lockout If one party in a conversation goes on-hook, both parties will be disconnected from the speech path automatically. A reorder tone is sent to the off-hook party before it is disconnected. No operation is necessary. Log-In/Log-Out Allows you to assign the Log-In
  • Panasonic KX-TA30850 | User Manual - Page 131
    assigned to a Flexible CO button. Programming References • Station Programming (Section 2) Flexible Button Assignment - Log-In/Log-Out Button • System Programming - Installation Manual [100] Hunting Group Set [600] Extension Group Assignment Feature Reference Station Hunting (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 132
    M 3.2 Telephone Features Message Waiting When the called extension is busy or does not answer your call, you can leave a notification so that the called party may call you back. As a message receiver, the lit Message/Ringer Lamp lets you know that a call has been received. If you receive notifi
  • Panasonic KX-TA30850 | User Manual - Page 133
    3.2 Telephone Features M Canceling using the MESSAGE button PT extension no. MESSAGE MESSAGE Lift the handset or press SP-PHONE/MONITOR. Enter the extension number Press MESSAGE (100 through 199) where twice. you left a message. Confirmation tone and dial tone Hang up or press SP-PHONE/
  • Panasonic KX-TA30850 | User Manual - Page 134
    M 3.2 Telephone Features Clearing all message notifications by the message receiver PT Lift the handset or press SP-PHONE/MONITOR. 700 Dial 700. Dial #. Hang up or press SP-PHONE/MONITOR. • All messages are cleared. Conditions PT • If the Message/Ringer Lamp does not go out after calling the
  • Panasonic KX-TA30850 | User Manual - Page 135
    3.2 Telephone Features M Message Waiting for Another Extension Allows you to check messages left at another extension and call back the message sender. The Another Extension Message Waiting button light on your extension lets you know that another extension has a message waiting. You can call back
  • Panasonic KX-TA30850 | User Manual - Page 136
    Lamp on another extension. Programming References • Station Programming (Section 2) Flexible Button Assignment - Another Extension Message Waiting Button • System Programming - Installation Manual [618] Message Waiting for Another Extension Feature Reference Message Waiting 3-82 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 137
    . • Message Waiting feature at your extension is available even while locked. Feature References Message Waiting for Another Extension Electronic Station Lockout - CANCEL ALL (3.3 Operator/Manager Service Features) Telephone Features 3-83
  • Panasonic KX-TA30850 | User Manual - Page 138
    /MUTE indicator turns off. Condition PT • This feature is only available during a hands-free conversation. Mixed Station Dialing Any telephone, either a KX-TA30820/KX-TA30830/KX-TA30850, single line rotary phone (10 pps, 20 pps) or single line touch tone telephone, may be used as an extension for
  • Panasonic KX-TA30850 | User Manual - Page 139
    You may press a CO button to select a desired outside (CO) line before pressing the One-Touch Dialing button. PT • "Speed Dialing", "One-Touch Dialing" and manual dialing can be used together. PT • You can store a number consisting of twenty-five digits or more by dividing and storing it into two One
  • Panasonic KX-TA30850 | User Manual - Page 140
    /MONITOR. Dial 0. Condition • If an operator is not assigned, this feature is not available and you will hear a reorder tone. Programming Reference • System Programming - Installation Manual [008] Operator Assignment 3-86 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 141
    Restricted may be displayed on a PT display and a reorder tone may sound due to the following. - The extension has been locked by the owner (Electronic Station Lockout). - The extension is restricted by the account code mode, "Verified - All". - The extension is restricted from making toll calls
  • Panasonic KX-TA30850 | User Manual - Page 142
    [419] Automatic Designated Outside (CO) Line Access Feature References Account Code Entry Electronic Station Lockout Toll Restriction (→ See the Installation Manual.) Line Access, Automatic Allows you to select an available outside (CO) line automatically. Any Telephone 9 phone no. Lift the
  • Panasonic KX-TA30850 | User Manual - Page 143
    3.2 Telephone Features O Line Access, Individual Allows you to select the desired outside (CO) line without dialing the line access code. PT CO phone no. Lift the handset or press SP-PHONE/MONITOR. Press the CO assigned as a Single-CO button. Dial tone • The CO indicator turns green. Enter
  • Panasonic KX-TA30850 | User Manual - Page 144
    cannot page extensions which have set the DND or Paging - DENY feature, or which are in use. Programming References • System Programming - Installation Manual [106] External Paging Access Tone [600] Extension Group Assignment - (Used for "Paging - Group" only.) Feature References Do Not Disturb (DND
  • Panasonic KX-TA30850 | User Manual - Page 145
    3.2 Telephone Features P Paging - All Allows you to make a voice announcement to all extensions. Your message is announced over the built-in speakers of proprietary telephones (PT) and the external pager. Any Telephone 33 Lift the handset or press SP-PHONE/MONITOR. Dial 33 . Confirmation tone
  • Panasonic KX-TA30850 | User Manual - Page 146
    P 3.2 Telephone Features Paging - Group Allows you to select an extension group and make a voice announcement. You can select all extension groups simultaneously. The announcement can only be heard through the extensions' built-in speakers. To access all groups simultaneously Any Telephone 330
  • Panasonic KX-TA30850 | User Manual - Page 147
    3.2 Telephone Features P Paging - ANSWER Allows you to answer an announced page at any extension within the system. Any Telephone 43 Lift the handset or press SP-PHONE/MONITOR. Dial 43. Confirmation tone Talk. • Alternatively you may press the Flexible CO button assigned as the One-Touch
  • Panasonic KX-TA30850 | User Manual - Page 148
    P 3.2 Telephone Features Paging and Transfer You can transfer a call using the paging feature (Paging - All, Paging - External, or Paging - Group). Using Paging - All PT and SLT During a conversation TRANSFER For a PT For an SLT For a PT: Press TRANSFER. For an SLT: Flash the hookswitch. Dial
  • Panasonic KX-TA30850 | User Manual - Page 149
    3.2 Telephone Features P Using Paging - External: to an external pager PT and SLT During a conversation TRANSFER For a PT For an SLT 34 For a PT: Press TRANSFER. For an SLT: Flash the hookswitch. Dial tone Dial 34. Confirmation tone Announce. • The other party is placed on hold. Wait
  • Panasonic KX-TA30850 | User Manual - Page 150
    can start a conversation. Condition SLT • If "Hold-3" is assigned in System Programming, you must dial "20" after flashing the hookswitch. Programming References • System Programming - Installation Manual [104] Hold Mode Selection [600] Extension Group Assignment 3-96 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 151
    3.2 Telephone Features P Paging - DENY A page sent to a built-in speaker can be denied by any extension in the system. Setting PT 7341 Lift the handset or press SP-PHONE/MONITOR. Dial 7341#. Paging Deny Hang up or press SP-PHONE/MONITOR. Canceling PT 7340 Lift the
  • Panasonic KX-TA30850 | User Manual - Page 152
    proprietary telephone is set to "Voice Call" in the Intercom Alert Assignment. - The proprietary telephone is receiving a call from a doorphone. Programming Reference • System Programming - Installation Manual [610] Paralleled Telephone Connection 3-98 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 153
    3.2 Telephone Features P Personal Speed Dialing Allows you to store up to ten speed dial numbers at your extension. These numbers are available for your extension only. Storing a phone number Any Telephone 2 personal speed dial no. desired no. Lift the handset or press SP-PHONE/ MONITOR. Dial
  • Panasonic KX-TA30850 | User Manual - Page 154
    P 3.2 Telephone Features Conditions • An account code must be stored by pressing " " and entering the account code after the line access code in the account code verify-all and forced modes. • You can store an extension number, telephone number, or feature number of up to twenty-four digits. Valid
  • Panasonic KX-TA30850 | User Manual - Page 155
    waiting time between going off-hook and connecting with a called line by System Programming. • A rotary telephone cannot use this feature. Programming Reference • System Programming - Installation Manual [203] Pickup Dial Delay Time Telephone Features 3-101
  • Panasonic KX-TA30850 | User Manual - Page 156
    P 3.2 Telephone Features Power Failure Transfer During a power failure, the following outside (CO) line will be connected to an assigned extension. Outside (CO) line 1: jack number 01 Conditions • During a power failure, all features cannot be used except for incoming and outgoing outside calls
  • Panasonic KX-TA30850 | User Manual - Page 157
    Telephone Features P Pulse to Tone Conversion Allows you to change the dialing mode from Pulse to Tone to access services that require tones, such as computer telephone services. Any Telephone phone no. (Pulse mode) Enter the phone number (Pulse mode). Dial #. desired no. (Tone mode) Enter the
  • Panasonic KX-TA30850 | User Manual - Page 158
    R 3.2 Telephone Features Redial, Last Number Automatically saves the last outside phone number dialed so that you can make a call to the same party later using a simple operation. PT SLT REDIAL Lift the handset or press SP-PHONE/MONITOR. Press REDIAL. Lift the handset. or 8 0 Dial ## or 80.
  • Panasonic KX-TA30850 | User Manual - Page 159
    3.2 Telephone Features R Redial, Saved Number Allows you to save the current external telephone number during a conversation, so that you can redial the same party later using a simple operation. The saved number can be redialed until another number is stored. Storing PT During a conversation or
  • Panasonic KX-TA30850 | User Manual - Page 160
    R 3.2 Telephone Features Room Monitor Allows you to monitor a room through a proprietary telephone with an AUTO ANSWER/MUTE button. The proprietary telephone you want to monitor should be prepared for monitoring beforehand. You can also monitor through a doorphone. You can use a proprietary
  • Panasonic KX-TA30850 | User Manual - Page 161
    to the monitored PT. PT • System Programming is required for a PT to be monitored. PT • This feature is not available for the KX-TA30850. Programming References • System Programming - Installation Manual [612] Room Monitor Assignment [707] Doorphone Access Tone Selection Telephone Features 3-107
  • Panasonic KX-TA30850 | User Manual - Page 162
    81 through 83). Programming References • Station Programming (Section 2) Flexible Button Assignment - One-Touch Dialing Button • System Programming - Installation Manual [001] System Speed Dialing Entry [803] Secret Speed Dialing/One-Touch Dialing Printing Feature References One-Touch Dialing System
  • Panasonic KX-TA30850 | User Manual - Page 163
    3.2 Telephone Features S Station Feature Clear Allows you to reset the following station features to the default settings. a) Absent Message Capability b) Automatic Callback Busy (Camp-On) c) Background Music (BGM) d) Call Forwarding e) Call Log, Incoming f) Call Pickup Deny g) Call Waiting h)
  • Panasonic KX-TA30850 | User Manual - Page 164
    S 3.2 Telephone Features Switching to Tone Alert "Voice Call" (through the built-in speaker) which is set at the called party's extension can be switched to "Tone Call" (ringing). This feature must be set beforehand at the called party's extension by Station Programming. Any Telephone extension
  • Panasonic KX-TA30850 | User Manual - Page 165
    make a call using pre-programmed speed dial numbers. This system supports one hundred speed dial numbers which are available to all extension must be stored by System Programming. • "Speed Dialing", "One-Touch Dialing" and manual dialing can be used together. • You may press a CO button or dial a
  • Panasonic KX-TA30850 | User Manual - Page 166
    - Installation Manual [006] Time (Day/Night/Lunch) Service Changing Mode [007] Time (Day/Night/Lunch) Service Start Time Feature References Time (Day/Night/Lunch) Service Setting (3.3 Operator/Manager Service Features) Time (Day/Night/Lunch) Service (→ See the Installation Manual.) 3-112
  • Panasonic KX-TA30850 | User Manual - Page 167
    3.2 Telephone Features T Timed Reminder You can receive a ringback at your telephone to remind you of a meeting or appointment. Either one time or daily (everyday until canceled) is available at a pre-set time. Setting Any Telephone Lift the handset or press SP-PHONE/MONITOR. 76 Dial 76. hour
  • Panasonic KX-TA30850 | User Manual - Page 168
    be cleared. PT • If an alarm time has not been set, the display will show the following. Alarm Not Stored Programming Reference • System Programming - Installation Manual [000] Date and Time Setting Feature Reference Timed Reminder, Remote (Wake-Up Call) (3.3 Operator/Manage
  • Panasonic KX-TA30850 | User Manual - Page 169
    in the option, forced or verify-all mode, use the Walking COS feature. Programming References • System Programming - Installation Manual [310] Account Codes [601]-[603] TRS - Class of Service (COS) Assignment - Day/Night/Lunch [605] Account Code Entry Mode Feature References Account Code Entry Toll
  • Panasonic KX-TA30850 | User Manual - Page 170
    in the program [301]. You can select the toll restriction COS number by System Programming. Programming Reference • System Programming - Installation Manual [301] Toll Restriction - System Speed Dialing Boundary Class Feature References System Speed Dialing Toll Restriction (→ See the Installation
  • Panasonic KX-TA30850 | User Manual - Page 171
    • A rotary telephone cannot use this feature. Programming References • Operator/Manager Service Features Extension Password Set (Manager only) • System Programming - Installation Manual [601]-[603] TRS - Class of Service (COS) Assignment - Day/Night/Lunch Feature Reference Toll Restriction Override
  • Panasonic KX-TA30850 | User Manual - Page 172
    3.3 Operator/Manager Service Features The system supports one operator and one manager. Any extension can be The 301st Call Log, Incoming in the Common Area Treatment 6) Time (Day/Night/Lunch) Service Setting 7) Timed Reminder, Remote (Wake-Up Call) 8) Extension Password Set (Manager only)
  • Panasonic KX-TA30850 | User Manual - Page 173
    3.3 Operator/Manager Service Features Manager Programming (Manager only) The manager (jack number 01) can program the following System Programming with their extension password even when they do not
  • Panasonic KX-TA30850 | User Manual - Page 174
    3.3 Operator/Manager Service Features To exit the programming mode PT When the display you will hear an alarm tone (3 beeps). Try again. Programming References • System Programming - Installation Manual [001] System Speed Dialing Entry [011] System Speed Dialing Name Setting [512] DISA Security
  • Panasonic KX-TA30850 | User Manual - Page 175
    3.3 Operator/Manager Service Features Call Log, Incoming in the Common Area - CLEAR ALL The operator or manager can clear all call information stored in the common area. Setting
  • Panasonic KX-TA30850 | User Manual - Page 176
    3.3 Operator/Manager Service Features Call Log Lock, Incoming in the Common Area The operator or manager can lock the displays of extensions so that the "Call Log, Incoming"
  • Panasonic KX-TA30850 | User Manual - Page 177
    3.3 Operator/Manager Service Features Date and Time Setting When the current time setting is wrong, you can adjust it by the following procedure. Setting - Be sure that you
  • Panasonic KX-TA30850 | User Manual - Page 178
    3.3 Operator/Manager Service Features Electronic Station Lockout - CANCEL ALL The operator or manager can cancel Electronic Station Lockout at all extensions. Setting - Be sure that you are in
  • Panasonic KX-TA30850 | User Manual - Page 179
    3.3 Operator/Manager Service Features The 301st Call Log, Incoming in the Common Area Treatment When the call log is full in the common area (300 calls are stored),
  • Panasonic KX-TA30850 | User Manual - Page 180
    Features Time (Day/Night/Lunch) Service Setting This system supports the Day, Night and Lunch modes. The the following depending on whether the service is in the Day, Night or Lunch mode. Day Mode or Night Mode or Lunch Mode Canceling the manual Day, Night or Lunch mode
  • Panasonic KX-TA30850 | User Manual - Page 181
    to the automatic day, night or lunch mode. Programming References • System Programming - Installation Manual [006] Time (Day/Night/Lunch) Service Changing Mode [007] Time (Day/Night/Lunch) Service Start Time [405]-[407] Flexible Outward Dialing Assignment - Day/Night/Lunch [408]-[410] Flexible
  • Panasonic KX-TA30850 | User Manual - Page 182
    3.3 Operator/Manager Service Features Timed Reminder, Remote (Wake-Up Call) The operator or manager can remotely set or cancel the Timed Reminder of a desired extension. Setting PT 764
  • Panasonic KX-TA30850 | User Manual - Page 183
    3.3 Operator/Manager Service Features Checking the time setting (with a display PT only) PT Lift the handset or press SP-PHONE/MONITOR. 764 Dial 764. extension no. Dial the
  • Panasonic KX-TA30850 | User Manual - Page 184
    3.3 Operator/Manager Service Features Extension Password Set (Manager only) The manager can assign a password to each extension ) button and enter a new number. Feature References Walking COS Manager Programming (Manager only) (3.3 Operator/Manager Service Features) 3-130 Telephone Features
  • Panasonic KX-TA30850 | User Manual - Page 185
    Section 4 Appendix Contents Display Examples 4-2 Feature Number List 4-8 Tone List 4-11 Troubleshooting 4-13
  • Panasonic KX-TA30850 | User Manual - Page 186
    Jan 1,2003 Wed 123: 123:Tony Viola 101: Busy 101: DND 1234567890 Panasonic 950-1001PP12345& → 123:Tony Viola → 101: Busy Alarm 10:15AM Alarm assigned to receive Caller ID service calls. This requires subscribing to caller identification services. Refer to the Installation Manual. Called by an outside
  • Panasonic KX-TA30850 | User Manual - Page 187
    setting "Call Waiting" for intercom calls and doorphone calls. Canceled "Data Line Security". Completed setting "Data Line Security". Day mode status. - "Time (Day/Night/Lunch) Service" Appendix 4-3
  • Panasonic KX-TA30850 | User Manual - Page 188
    setting "Call Log Lock, Incoming". Completed setting "Electronic Station Lockout". Completed setting "Message Waiting for Another Extension Lock". Lunch mode status. - "Time (Day/Night/Lunch) Service" Canceled Absent Message. Completed setting "Message Waiting". 4-4 Appendix
  • Panasonic KX-TA30850 | User Manual - Page 189
    The "Message Waiting" setting was not accepted. Canceled "Message Waiting". Confirming the number of logged calls. Night mode status. - "Time (Day/Night/Lunch) Service" There is not a held call when retrieving a call on hold or parked call. There is not an incoming call when trying to pick up a call
  • Panasonic KX-TA30850 | User Manual - Page 190
    4 Appendix Examples - in Station Programming mode Display CID-C Indication CID-P Indication CID-C Selection CID-P Selection CO-1 Conference C.W.Tone-1 Ext101: 1234 EXT-123 Function Clear FWD/DND Group Log In/Out Jack01EXT101 Lock Release Message Waiting MW- 123 Not Stored Other CO Key Pref. In
  • Panasonic KX-TA30850 | User Manual - Page 191
    4 Appendix Conditions • If the displayed characters exceed sixteen digits, "&" is shown on the right-hand side of the display. • The duration time display is only shown when you make or receive an outside call. The Count start time for outgoing calls can be programmed as desired. • When you confirm
  • Panasonic KX-TA30850 | User Manual - Page 192
    4 Appendix Feature Number List Feature Numbers and Additional Required Digits Feature Number Absent Message Capability set / cancel 75 Account Code Entry for an SLT 49 or Call Forwarding set / cancel 71 Call Forwarding - Follow Me set / cancel 71 Call Hold (Hold Mode 2 or 3) for an SLT
  • Panasonic KX-TA30850 | User Manual - Page 193
    Timed Reminder cancel / confirm 76 Timed Reminder, Remote cancel 764 Timed Reminder, Remote check 764 Timed Reminder, Remote set 764 Time Service set / cancel 78 Walking COS 7 *2 hhmm hh: hour (01 - 12) / mm: minute (00 - 59) Additional Required Digits 0 / 1 + # (1 + EXTN.) / (2 + EXTN
  • Panasonic KX-TA30850 | User Manual - Page 194
    4 Appendix Feature Numbers Feature While a busy tone is heard Automatic Callback Busy (Camp-On) Busy Station Signaling (BSS) Executive Busy Override While a Do Not Disturb tone is heard Do Not Disturb (DND) Override During a call or while talking Switching to Tone Alert Conference for an SLT Door
  • Panasonic KX-TA30850 | User Manual - Page 195
    4 Tone List < TONE > Confirmation Tone 1 Confirmation Tone 2 Confirmation Tone 3 Dial Tone 1 Dial Tone 2 Dial Tone 3 Busy Tone Reorder Tone Ringback Tone Do Not Disturb (DND) Tone Outside-to-Outside (CO-to-CO) Line Call Limit Warning Tone Call Waiting Tone 1 Call Waiting Tone 2 (Single) Call Waiting
  • Panasonic KX-TA30850 | User Manual - Page 196
    4 < RING TONE > Incoming Calls (Single) / Hold Recall (Outside calls) Incoming Calls (Double) / Hold Recall (Intercom calls) Incoming Calls (Triple) / Timed Reminder Callback Ringing (Camp-on Recall) / Doorphone Ringing (S-Double) Appendix 1 s 4-12 Appendix
  • Panasonic KX-TA30850 | User Manual - Page 197
    Troubleshooting If a power failure occurs... Your system enables a conversation between a specific outside (CO) line and extension (Power Failure Transfer) and supports system data as possible. Problem The unit does not ring numbers, refer to the Installation Manual. • Increase the Ringer Volume.
  • Panasonic KX-TA30850 | User Manual - Page 198
    Systems www.voicesonic.com Phone: 877-289-2829 Copyright: This manual is copyrighted by Panasonic Communications Co., Ltd. (PCC). You may print out this manual solely for internal use with this model. Except above, you may not reproduce this manual in any form, in whole or part, without the prior
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
Please read this manual before connecting the Advanced Hybrid System.
Model No.
KX-TA308
Advanced Hybrid System
User Manual
Panasonic Telephone Systems
Panasonic
KX-TA308
www.voicesonic.com
Phone: 877-289-2829
Panasonic KX-TA308, KXTA308, KX TA308, TA308, KX-TA30820, KXTA30820, KX-TA30830, KXTA30830, KX-TA30850, KXTA30850