Panasonic KX-TDA600 Installation Manual - Page 171

2.10 Connection of 2.4 GHz Portable Stations 2.10 Connection of 2.4 GHz Portable Stations 2.10.1 Overview The following equipment is required to connect the wireless system: CS: Cell Station (KX-TDA0142/KX-T0141) KX-TDA0142 Using a CSIF Card This unit determines the area covered by the wireless system. Up to 3 calls can be made at the same time through each CS. • CSIF4 (KX-TDA0143) One CSIF4 card supports up to 4 Cell Stations. • CSIF8 (KX-TDA0144) One CSIF8 card supports up to 8 Cell Stations. KX-T0141 Using a DHLC/DLC Card This unit determines the area covered by the wireless system. Up to 2 calls can be made at the same time through each CS. PS: 2.4 GHz Portable Station (KX-TD7680/KX-TD7690) The Hybrid IP-PBX can support up to 256 PSs. If an EMEC card is installed in the Hybrid IP-PBX, up to 512 PSs can be supported. For more details about the PS, refer to the PS Operating Instructions. CAUTION • The CS should be kept free of dust, moisture, high temperature (more than 40 °C [104 °F]), low temperature (less than 0 °C [32 °F]), and vibration, and should not be exposed to direct sunlight. • The CS should not be placed outdoors (use indoors). • The CS should not be placed near high-voltage equipment. • The CS should not be placed on a metal object. • Systems using 2.4 GHz ISM (Industrial, Scientific and Medical) band may interfere with the KXTDA wireless system. Examples of such systems are cordless telephones, wireless LAN, Home RF, microwave ovens and other ISM devices. These systems may cause minor noise. • Keeping some distance between the equipment listed below may prevent interference. (The distance may vary depending on the environment.) Equipment Distance CS and office equipment such as a computer, telex, fax More than 2 m (6 ft 7 in) machine, etc. CS and PS More than 1 m (3 ft 3 in) Each PS More than 0.5 m (1 ft 8 in) Hybrid IP-PBX and CS More than 2 m (6 ft 7 in) CS and CS More than 15 m (49 ft) Installation Manual 171