Panasonic KX-TG2224W 2.4 Ghz Digital Cdl - Page 53
Useful Information, General
UPC - 037988473496
View all Panasonic KX-TG2224W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Troubleshooting Problem Cause & Remedy You cannot operate the Answering System with the base unit. You cannot operate the Answering System from a touch tone phone. You cannot operate the Answering System with the handset. While recording a greeting message, the unit starts to ring and stops recording. During playback, the unit starts to ring and stops playback. Caller ID information is not displayed during message playback (p. 43). • The handset user is operating the Answering System, or is on the phone. Wait until the IN USE/CHARGE indicator light goes out. • Make sure you enter the correct remote code (p. 45). • The Answering System may not respond if the tones are too short to activate the unit. Press each button firmly. • The Answering System is off. Turn it on (p. 47). • Someone is operating the Answering System. • You are too far from the base unit. Walk closer to the base unit. • The unit is recording a message. To answer the call, press [ ] or [ ]. • To answer the call, press [ ] or [ ]. Start again from the beginning after hanging up. • To answer the call, press [ ] or [ ]. To resume playback, press [MESSAGE/SLOW TALK] after hanging up. • Caller ID information will not be displayed if the Caller List is renewed and the caller ID information is erased (p. 27). General Problem The unit does not work. Cause & Remedy • Check the settings (p. 8-9). • Check whether the dialing mode setting is correct (p. 14). • Charge the battery fully (p. 8). • Clean the charge contacts and charge again (p. 9). • Install the battery properly (p. 8). • Place the handset on the base unit and unplug the AC adaptor to reset it. Plug in, and try again. • Re-install the battery (p. 8) and charge it fully. Useful Information For assistance, please call: 1-800-211-PANA(7262) 53