Panasonic KX-TG4031B KXTG4031 User Guide - Page 45
Useful Information, For assistance, please visit, Battery recharge, Making/answering calls, intercom
View all Panasonic KX-TG4031B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Useful Information Battery recharge Problem The handset beeps and/or ) flashes. I fully charged the batteries, but - ) still flashes, - 0 is displayed, or - the operating time seems to be shorter. Cause/solution L Battery charge is low. Fully charge the batteries (page 10). L Clean the battery ends (S, T) and the charge contacts with a dry cloth and charge again. L It is time to replace the batteries (page 10). Making/answering calls, intercom Problem _ is displayed. Noise is heard, sound cuts in and out. The handset does not ring. The base unit does not ring. I cannot make a call. I cannot make long distance calls. Cause/solution L The handset is too far from the base unit. Move closer. L The base unit's AC adaptor is not properly connected. Reconnect AC adaptor to the base unit. L The handset is not registered to the base unit. Register it (page 28). L You are using the handset or base unit in an area with high electrical interference. Re-position the base unit and use the handset away from sources of interference. L Move closer to the base unit. L If you use a DSL/ADSL service, we recommend connecting a DSL/ADSL filter between the base unit and the telephone line jack. Contact your DSL/ADSL provider for details. L The ringer volume is turned off. Adjust the ringer volume (page 23). L Silent mode is turned on. Turn it off (page 26). L The ringer volume is turned off. Adjust the ringer volume (page 16). L The dialing mode may be set incorrectly. Change the setting (page 14). L The handset is too far from the base unit. Move closer and try again. L Make sure that you have long distance service. For assistance, please visit http://www.panasonic.com/help 45