Panasonic KXTG2335 KXTG2335 User Guide - Page 20

Making Calls To dial after confirming the entered number 1 Enter a phone number. 3334444| KClear PauseL • If you misdial, press Clear. Enter the correct number. • If a pause is required when dialing, press Pause where needed (p. 47). • To cancel, press [OFF]. 2 Press [C] or [s]. 3 To hang up, press [OFF] or place the handset on the base unit. To adjust the receiver/ speaker volume during a conversation There are 3 volume levels for the receiver and 6 volume levels for the speaker. To increase volume, press [B]. To decrease volume, press [d]. Ex. Receiver volume: High Speaker volume: Level 6 Volume Low K(VE) High MuteL • The display shows the current volume setting. • If you try to increase/decrease volume when it is at the maximum/ minimum level, the handset will beep 3 times. To redial the last number dialed Press [C] or [s], then press [REDIAL]. 20 To redial using the redial list (Memory Redial) The last 5 phone numbers dialed are stored in the redial list. 1 Press [REDIAL]. 333-4444 KErase dB • The last number dialed is displayed. 2 Scroll to the desired number by pressing [d] or [B]. • You can also scroll down through the list by pressing [REDIAL]. • To exit the list, press [OFF]. 3 Press [C] or [s]. • To erase an item, scroll to the item then press Erase. • If "No items stored" is displayed, the list is empty. To put a call on hold 1 Press [HOLD/INTERCOM] during a conversation. • "Line on hold." is displayed. • To transfer the call to the base unit, see page 39. 2 Press [HOLD/INTERCOM] again. • "Hold" is displayed. To return to the call, press [C] or [s]. • The base unit user can also take the call by pressing [SP-PHONE]. • If another phone is connected on the same line (p. 8), you can also take the call by lifting its handset. • If a call is kept on hold for 6 minutes, an alarm tone will start to sound and the Ringer/Message Alert indicator will start to flash rapidly. After 4 additional minutes on hold, the call will be disconnected.