Panasonic KXTG2563F KXTG2563B User Guide - Page 59

Before Requesting Help Problem Remedy "No link to base. Place on cradle and try again." is displayed and an alarm tone sounds. •You are too far from the base unit. Move closer and try again. •Place the handset on the base unit and try again. •Plug in the AC adaptor. •Raise the base unit antennas. The unit does not work. •Check the settings (p. 12-16). •Charge the battery fully (p. 13). •Clean the charge contacts and charge again (p. 14). •Install the battery properly (p. 57). •Place the handset on the base unit and unplug the AC adaptor to reset. Plug in, and try again. •Re-install the battery and place the handset on the base unit (p. 57). Try again. Static, sound cuts in/out, fades. Interference from other electrical units. •Locate the handset and the base unit away from other electrical appliances (p. 3). •Move closer to the base unit. •Raise the base unit antennas. •Press (FUNCTION/EXIT/CH) to select a clearer channel. The handset and/or the base •The ringer volume is set to OFF. Set to unit do not ring. HIGH or LOW (p. 19). The handset display is blank. •The handset is in the standby mode (p. 14). Press Ö, Ñ, BACK Ü or FWD/EDIT á to turn the display on. The handset display is still blank after pressing Ö, Ñ, BACK Ü or FWD/EDIT á. •Charge the battery fully (p. 13). Useful Information 59