Panasonic KXTG5050 KXTG5050 User Guide - Page 40

Special Features Key Tone Handset You can select whether or not the handset keys will sound tones (key tone, confirmation tone, error tone). The factory preset is ON. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting Key tone 3 Scroll to "Key tone" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Select "Off" or "On" by pressing [d] or [B]. Key tone :On 5 Press the soft key ( SAVE ), then press [OFF]. Re-registering the Handset Handset & Base Unit If "No link to base. Move closer to base and try again." is displayed even when using the handset near the base unit, the handset may have lost communication with the base unit. You need to re-register the handset to that base unit. • Have both the handset and base unit nearby during registration. • Follow steps 1 and 2 listed below. You have about 1 minute to complete them. 1 Base unit: Press and hold [LOCATOR] for 3 seconds. • The CHARGE indicator flashes. 2 Handset: Press and hold [FLASH/CALL WAIT] until "Handset Registering" is displayed. • After registration is complete, a long beep sounds from the handset. IN USE SPIPRIVACY1 Handset Registering IN USE SPIPRIVACY1 Handset [1] Registered • If the handset beeps 3 times and "Error!!" is displayed, an error occurred. Try again from step 1. • You can stop registration by pressing [OFF] on the handset and pressing [LOCATOR] on the base unit. 40