Panasonic KXTG5439 5.8 Ghz Tot 2 Hs - Page 58
Making/answering calls, Intercom, Problem, Cause & solution, REDIAL, PAUSE
View all Panasonic KXTG5439 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Useful Information Making/answering calls, Intercom Problem Static is heard, sound cuts in and out. Interference from other electrical units. The handset does not ring. I cannot make a call. I cannot redial by pressing {REDIAL}. I cannot join an outside call. I tried to use voice changer during a call, but {(VX)} is not shown on the display. I cannot have a conversation using the headset. I cannot make long distance calls. I cannot page the handset or base unit. Cause & solution L Move the handset and the base unit away from other electrical appliances. L Move closer to the base unit. L Raise the base unit antennas. L Turn on the clarity booster feature (page 20). L If your unit is connected to a telephone line with xDSL service, we recommend connecting a noise filter between the base unit and the telephone line jack. Contact your xDSL provider for details. L The ringer volume is turned off. Adjust it (page 34). L The dialing mode may be set incorrectly. Set the dial mode (page 38) to match the type of telephone service you have (tone or pulse). L If the base unit (including answering system) or the other handset is in use, you may not be able to make a call. Try again later. L While listening to messages using the handset, you cannot make a call. Exit by pressing {OFF}. L If the last number dialed was more than 48 digits long, the number will not be redialed correctly. L If you press {REDIAL} after you have started dialing, this button functions as the {PAUSE} button. To redial, do not dial any numbers before pressing {REDIAL}. L You cannot join the call if the other handset is using voice changer. To join the call, have that handset cancel the voice changer. L You cannot use the voice changer when you are on a conference call. L Make sure that an optional headset is connected properly (page 55). L If "SP-phone" is displayed on the handset, press {C} to switch to the headset. L Make sure that you have long distance service. L The called handset is too far from the base unit. L The called unit is in use. Try again later. 58 For assistance, please call 1-800-211-PANA (7262).