Panasonic KXTG5456S 5.8g 1.4colorlcd 1hs - Page 43
Re-registering the handset, SELECT, Base unit Talking Caller ID, Important, Handset, Base unit
UPC - 904662892358
View all Panasonic KXTG5456S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
1 Press {MENU} (middle soft key). 2 Scroll to N, then press {SELECT}. 3 Scroll to "Set base unit", then press {SELECT}. 4 Scroll to "Interrupt tone", then press {SELECT}. 5 Press {V} or {^} repeatedly to select the desired setting. 6 Press {SAVE}, then press {OFF}. Base unit Talking Caller ID You can turn the Talking Caller ID feature (page 26) on or off for the base unit. This feature must be set by using the handset. 1 Press {MENU} (middle soft key). 2 Scroll to N, then press {SELECT}. 3 Scroll to "Set base unit", then press {SELECT}. 4 Scroll to "Talking CallerID", then press {SELECT}. 5 Press {V} or {^} repeatedly to select "On" or "Off". 6 Press {SAVE}, then press {OFF}. Programmable Settings Re-registering the handset If "No link to base. Move closer to base, try again." is displayed even when the handset is near the base unit, you may need to re-register the handset to the base unit. Important: L Make sure the base unit is not being used. L Have the handset and base unit near each other when re-registering the handset. 1 Handset: Press {MENU} (middle soft key). 2 Scroll to N, then press {SELECT}. 3 Scroll to "Registration", then press {SELECT}. 4 Base unit: Press and hold {LOCATOR/ INTERCOM} until the CHARGE indicator flashes. L After the CHARGE indicator starts flashing, the rest of the procedure must be completed within 1 minute. 5 Handset: Press {OK} (right soft key), then wait until the handset beeps. L Registration is complete. For assistance, please visit http://www.panasonic.com/consumersupport 43