Panasonic KXTG9361 Expandable Cordless Phone/ans Sys - Page 29

Note: L To stop the alarm, press any dial key or place the handset on the base unit or charger. L When the handset is in use, the alarm will not sound until the handset is in standby mode. L If the talking alarm clock is set at the same time for two or more handsets, the first handset makes the announcement, while the other handsets only sound the tone. L If the other unit is in use at the set time, the handsets sound the tone instead of the selected announcement. L If you select "Once", the setting changes to "Off" after the alarm sounds. L When the ringer volume for outside calls is set to off (page 24), the alarm sound is heard at a low level. Customer support The handset can display the Internet address where you can download the operating instructions or get further information for this product by using your computer. 1 {MENU} i {#}{6}{8}{0} 2 {OFF} Programming Registering a unit Operating additional handsets Additional handsets Up to 6 handsets can be registered to the base unit. Important: L See page 6 for information on the available model. Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. 1 Handset: {MENU} i {#}{1}{3}{0} 2 Base unit: ■ KX-TG9361 Press and hold {LOCATOR} for 4 seconds. (No registration tone) ■ KX-TG9371/KX-TG9372 Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L If all registered handsets start ringing, press the same button to stop. Then repeat this step. L The next step should be completed within 90 seconds. 3 Handset: Press {OK}, then wait until a long beep sounds. 4 {OFF} For assistance, please visit http://www.panasonic.com/help 29