Panasonic KXTGA541S 5.8g Nxpd Tot 1 Hs - Page 39

Telephone settings Dialing mode If you cannot make calls, change this setting depending on your telephone line service. "Tone" (default): For tone dial service. "Pulse": For rotary pulse dial service. 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set tel line" by pressing {V} or {^}, then press {>}. 4 Scroll to "Set dial mode" by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. 6 Press {Save}, then press {OFF}. Flash time The flash time depends on your telephone exchange or host PBX. You can select: "90ms" (milliseconds), "100ms", "110ms", "250ms", "300ms", "400ms", "600ms", or "700ms" (default). 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set tel line" by pressing {V} or {^}, then press {>}. 4 Scroll to "Set flash time" by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. 6 Press {Save}, then press {OFF}. Programmable Settings Note: L The setting should stay at 700 ms unless pressing {Flash} fails to pick up the Call Waiting call. L If the unit is connected via a PBX, certain PBX functions (call transferring, etc.) may not work correctly. Consult your PBX supplier for the correct setting. Line mode The line mode is preset to "B" and generally should not be adjusted. If "Line in use" on the handset is not displayed properly, the line mode selection is incorrect. Set line mode to "A". 1 Press {MENU}. 2 Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. 3 Scroll to "Set tel line" by pressing {V} or {^}, then press {>}. 4 Scroll to "Set line mode" by pressing {V} or {^}, then press {>}. 5 Press {V} or {^} repeatedly to select the desired setting. 6 Press {Save}, then press {OFF}. For assistance, please call 1-800-211-PANA (7262). 39