Panasonic MC-UG502 MC-UG502 Owner's Manual (English) - Page 34
Cleaning Agitator, Agitator Assembly, agitator should be replaced.
View all Panasonic MC-UG502 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Agitator Assembly End Cap Brush Unit Belt Pulley End Cap Cleaning Agitator ➢ Clean agitator after every five uses and every time the belt is replaced. ➢ Remove lower plate. ➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors. ➢ Remove agitator. ➢ Remove any string or debris located on the end caps, washers or agitator shaft. ➢ Reinstall agitator and lower plate. Card Carte Tarjeta Replacing Agitator ➢ When the bristles on the agitator are worn so that they do not touch a card held across the lower plate, the agitator should be replaced. ➢ Remove lower plate and agitator. ➢ Clean debris from end caps. ➢ Position belt over belt pulley on the new agitator. ➢ Reinstall agitator and lower plate. - 34 -
- 34 -
➢
Clean agitator after every five uses
and every time the belt is replaced
.
➢
Remove lower plate
.
➢
Cut off any carpet pile and lint
entangled around agitator with a pair
of scissors
.
➢
Remove agitator
.
➢
Remove any string or debris located
on the end caps, washers or agitator
shaft
.
➢
Reinstall agitator and lower plate
.
Cleaning Agitator
➢
When the bristles on the agitator are
worn so that they do not touch a card
held across the lower plate, the
agitator should be replaced.
➢
Remove lower plate and agitator.
➢
Clean debris from end caps
.
➢
Position belt over belt pulley on the
new agitator
.
➢
Reinstall agitator and lower plate.
Card
Carte
Tarjeta
Replacing Agitator
Agitator Assembly
End Cap
End Cap
Belt
Pulley
Brush
Unit