Panasonic PT-50LC13 Multi-media Display - Page 43

Adjusting screen position and size Adjustment Button Adjustment Details item H Position Press ► button. The image moves to the right. Note Press ◄ button. The image moves to the left. V Position Press ► button. The image moves up. Press ◄ button. The image moves down. H WIDTH Press ACTION If noise appears on the ends of the button. image in SHRINK, switch to ENLARGE. (SHRINK) If noise appears on the ends of the image in WIDEN, switch to NARROW. (WIDEN) Only JUST mode (ENLARGE) (NARROW) Only NORMAL mode (Except PC input) V SIZE Press ► button. Press to enlarge image vertically Only ZOOM mode Press ◄ button. Press to shrink image vertically Advanced Operation H SIZE Press ► button. Press to enlarge image horizontally RGB input Press ◄ button. Press to shrink image horizontally PHASE Press ► button. Adjust in order to remove any picture interference or contour blurring RGB input Press ◄ button. which may occur in computer images. Notes: • This projection display is equipped with various screen modes. If a screen mode with a different aspect from the broadcast program is selected, image will appear differently. Select the proper screen mode with this in mind. • Be careful when using this projection display for commercial purposes or for public use, such as in cafes and hotels. • Shrinking and enlarging images by using screen mode switching function (zoom, etc.) may violate copyright laws. • Images displayed on a wide screen TV will be cut off or distorted at the edges, when viewing normal aspect images of 4:3 in ZOOM, JUST or FULL mode. Display in NORMAL mode to view the original image intended by the producer. • For 1080i and 720p input images, screen size cannot be adjusted. • The adjusted setting will be kept even when the projection display is turned off. • The signals output from the monitor output terminal on the back of the projection display is not affected when the screen size and position is adjusted. 43