Panasonic PV GS400 Digital Video Camcorder - Page 54

Editing Mode Copying on a DVD-R or an S-VHS (or a VHS) Cassette (Dubbing) After connecting the Camcorder to the DVD Recorder or the VCR as illustrated, start the following procedures. S / 2 (L2) [S-VIDEO IN] 2 [VIDEO IN] [AUDIO IN] 1 ≥If various setups (such as external input, tape speed, etc.) are required, please refer to the operating instructions of your DVD Recorder or VCR. Camcorder: 3 Press the [1] Button (19) to start playback. DVD Recorder/VCR: 4 Start recording. 5 Press the Pause or Stop Button to stop recording. Camcorder: 6 Press the [∫] Button (20) to stop playback. Recording the Contents of Other Equipment After connecting the Camcorder and the other equipment as illustrated, start the following procedures. AV IN/OUT PHONES DV S-VIDEO IN/OUT 1 AV Cable 2 S-Video Cable When connecting with DV Cable (Only for models equipped with the DV terminal) DV S / 2 (L2) 3 S / 2 (L2) [S-VIDEO OUT] 2 [VIDEO OUT] [AUDIO OUT] 1 DV S-VIDEO IN/OUT AV IN/OUT PHONES 3 DV Cable (optional) Be sure to press the [OSD] Button (-14-) on the Remote Controller prior to copying so that no indications are visible. Otherwise, the displayed tape counter and function indications are also copied. (When connecting with DV Cable, the indications may not appear.) ≥Also read the operating instructions of the DVD Recorder or the VCR carefully. Camcorder: 1 Insert the recorded Cassette. DVD Recorder/VCR: 2 Insert an unrecorded DVD-R or Cassette with an erasure prevention tab. 1 AV Cable 2 S-Video Cable Camcorder: 1 Set [TAPE PLAYBACK MENU] >> [AV IN/OUT] >> [AV JACK] >> [IN/OUT]. (16) MENU STILL ENTER FADE 2 Insert an unrecorded Cassette. Other Equipment: 3 Insert a recorded Cassette and start playback. 54