Panasonic PV GS400 Digital Video Camcorder - Page 57

Editing Mode ≥The [PRINT] Indication does not appear when the card is not inserted in the Camcorder. (You cannot print pictures.) ≥When the [PRINT] Indication keeps blinking (more than about 1 minute), the Camcorder and the printer are not connected properly. Connect the cable again or check the printer. ≥When the Camcorder and the printer are connected in the Tape Recording/Playback Mode, the [WEB ] or the [WEB ] Indication may appear on the LCD Monitor. However, images cannot be printed. 3 Select the desired picture. ≥Images cannot be printed when they are displayed in Multi-Picture Mode. 4 When printing with date: Set [PICTURE PLAYBACK MENU] >> [PRINT] >> [DATE] >> [ON]. If you want to stop printing halfway Press the [∫] Button (20). ≥Do not operate as follows during printing, pictures cannot be printed properly. ≥Disconnecting the USB Cable ≥Removing the Card ≥Switching the operation mode ≥If the Camcorder is disabled while it is connected to the printer, connect the USB connection cable again or check the printer. (16) MENU STILL ENTER FADE ≥You cannot set date printing when the printer does not support it. ≥Proceed to the next step if you do not need date printing. 5 Set [PICTURE PLAYBACK MENU] >> [PRINT] >> [THIS PICTURE] >> a desired paper size. (16) MENU STILL ENTER FADE ≥You cannot set a paper size which is not supported by the printer. 6 Press the [5] Button (18) or [6] Button (21) to select a desired number of prints. STILL ENTER FADE (21) (18) ≥You can set the number of prints up to 9. 7 Press the [ENTER] Button (19). (19) STILL ENTER FADE 57