Panasonic PVHS2000 PVHS2000 User Guide - Page 16
Watching One Show While, Recording Another on the, Hard Disk Recorder
View all Panasonic PVHS2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Advanced Connections (continued) Watching One Show While Recording Another on the Hard Disk Recorder Use a cable splitter and attach RF cables to both the Hard Disk Recorder and your television if you want to watch one show while recording another show on the Hard Disk Recorder. 1. Connect the incoming RF cable from the wall to the IN jack on the 2-way splitter. 2. Connect an RF cable from one OUT jack on the 2-way splitter to the ANT/CATV IN jack on the Hard Disk Recorder. 3. Connect another RF cable from the other OUT jack on the 2-way splitter to the VHF/UHF jack on your television. 4. Follow the C ~ E instructions on page 9 for telephone connection, AC power connection, and setup. NOTE • Refer to your TV owner's manual for more information on making connections to your television. IN OUT OUT TV VHF/UHF R AUDIO L VIDEO IN Cable Splitter INPUT R AUDIO ANT/CATV 1 IN LINE 2 VIDEO S-VIDEO IN OUTPUT R AUDIO LL VIDEO S-VIDEO OUT Hard Disk Recorder IR SERIAL BLASTER CONTROL PORT TEL LINE AC-IN Attaching Satellite Receiver and Cable Box Controllers If you connect a satellite receiver or a cable box to the Hard Disk Recorder, you need to attach a controller cable so the Hard Disk Recorder can change the channels on these devices. The controller, either a serial cable or an IR blaster cable, acts as a remote control for these devices. When you press the Channel Up and Channel Down buttons on the Hard Disk Recorder remote control, the channel is changed on your other device. See "Connecting a Serial Cable" if your satellite receiver has a serial connector. If your satellite receiver or cable box does not have a serial connector, see "Connecting and Setting Up the IR Blaster" on page 17. Connecting a Serial Cable If the device you want the Hard Disk Recorder to control has a serial connector, use the supplied serial cable instead of the supplied IR blaster. 1. Connect the serial cable to the SERIAL CONTROL port on the Hard Disk Recorder. If your receiver has a 15-pin serial connector, use the supplied 15-pin to 9-pin adapter. 2. Connect the other end of the serial cable to the serial port on your other device. 16