Panasonic PVQ2012 PVQ1312B User Guide - Page 22

Advanced Operation, Tape Operation

Page 22 highlights

Tape Operation Search System is ... Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings. Index Search Program End Search Go directly to the desired recording. 1 INDEX SEARCH ENTER INDEX NUMBER:1 US I NG 1-9 KEYS FORWARD SEARCH:FF REVERSE SEARCH:REW NEXT : SEARCH EX I T : STOP Press SEARCH in Playback or Stop mode to display INDEX SEARCH screen. Locates end point of recording for continuity. 1 Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen . 2 PROGRAM END SEARCH Press FF to start search. 2 I NDEX SEARCH 3 I NDEX SEARCH Press number keys to select the recording number. • To calculate number, see below. SEARCH START:FF EXIT : SEARCH Example of Program End Search operation. 3 INDEX SEARCH FORWARD SEARCH:FF REVERSE SEARCH:REW Press FF or REW to start search. • Play begins at search end. To search forward or back 1 index, press FF or REW while screen left in displayed (10 seconds). s To calculate the Index Number Example 1: To go to rec. 2 from rec. 4, enter 3 and press REW. Fig.1 PLAYBACK DIRECTION Program 1 Program 2 or BLANK INDEX Press SEARCH button FF Fig.2 Program 1 BLANK End Point Program 2 BLANK INDEX Press SEARCH button FF End Point Fig.3 IfsearchexceedsafewsecondsinBLANKarea. Press SEARCH button INDEX Program 1 BLANK Program 2 FF End Point 1 2 3 45 6 7 Example 2: To go to rec. 6 from rec. 2, enter 4 and press FF. Upon locating end point... The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops. 1 2 3 45 6 7 NOTE: indicates start points of each recording. Press SEARCH button Notes • Make each entry within 10 seconds, or the Index Search mode will be canceled. • If Index Search is started very close to an index mark, that index mark may not be counted in the search. Notes • If Program End Search is started very close to an index mark, that mark may be skipped over. • To cancel, press PLAY or STOP. 22 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

22
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information are also included.
These index marks can be used to access or scan recordings.
Tape Operation
Program End Search
1
Example of
Program End Search
operation.
Fig.1
Fig.2
Fig.3
If search exceeds a few seconds in BLANK area.
Program 2
BLANK
Program 1
INDEX
Press SEARCH button
FF
2
Press SEARCH button
1
Press SEARCH
in
Playback or Stop
mode to display
INDEX SEARCH
screen.
Index Search
Go directly to the desired recording.
2
Press number
keys
to select the
recording number.
To calculate number,
see below.
3
Press FF
or
REW
to start search.
Play begins at search
end. To search
forward or back 1
index,
press FF
or
REW
while screen left
in displayed (10
seconds).
Make each entry within 10 seconds, or the Index
Search mode will be canceled.
If Index Search is started very close to an index
mark, that index mark may not be counted in the
search.
Notes
NOTE:
indicates start points of each recording.
To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
6
1
5
7
2
3
4
1
7
5
3
4
6
2
Press SEARCH
twice in Playback
or Stop mode to display
PROGRAM END SEARCH screen
.
Press FF
to
start search.
Upon locating end point...
The unit searches slightly past end point,
reverse searches, and plays the last few
seconds of the program, then stops.
If Program End Search is started very
close to an index mark, that mark may be
skipped over.
To cancel, press PLAY or STOP.
Locates end point of recording for continuity.
End Point
Notes
PLAYBACK DIRECTION
Program 1
Program 2 or BLANK
INDEX
Press SEARCH button
FF
End Point
Program 2
BLANK
INDEX
BLANK
Program 1
Press SEARCH button
FF
End Point
ENTER
I
NDEX
NUMBER
:
1
US
I
NG 1
-
9
KEYS
FOR
W
ARD
SEARCH
:
FF
REVERSE
SEARCH
:
REW
NEXT
:
SEARCH
EX
I
T
:
STOP
I
NDEX SEARCH
I
N
D
EX
S
EARCH
3
I
N
D
EX
S
EARCH
FOR
W
ARD
SEARCH
:
FF
REVERSE
SEARCH
:
REW
I
NDEX SEARCH
SEARCH
START
:
FF
EX
I
T
:
SEARCH
PROGRAM
END
SEARCH