Panasonic RP-BTGS10 RP-BTGS10-K Owner's Manual (English) - Page 19
Bluetooth, device connecting, Sound and audio volume, Calls, The device cannot be connected, No sound
View all Panasonic RP-BTGS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ENGLISH Bluetooth® device connecting The device cannot be connected • The unit's pairing information may have been deleted from the Bluetooth® device. Pair them again if pairing information cannot be found. ( P. 8) • Delete the pairing information for this unit from the Bluetooth® device, then pair them again. ( P. 8) Sound and audio volume No sound • Make sure that the unit and the Bluetooth® device are connected correctly. ( P. 8) • Check if music is playing on the Bluetooth® device. • Make sure that the unit is turned on and the volume is not set too low. • Pair and connect the Bluetooth® device and the unit again. ( P. 8) • If you use the setting for transmitting sound in high quality, switch to the setting with higher priority on connection. ( P. 10) Low volume • Increase the volume of the unit. ( P. 11) • Increase the volume on the Bluetooth® device. • Adjust the speakers to a position appropriate for listening. Sound from the device is cut off / Sound quality is bad • Sound may be disrupted if signals are blocked. Do not fully cover this unit with your palm, etc. • The device may be out of the 10 m (33 feet) communication range. Move the device nearer to this unit. • Remove any obstacle between this unit and the device. • Switch off any wireless LAN device when not in use. • Is the LED on top of the unit blinking in red? A communication problem may arise if the battery is depleted. Charge the AAA Ni-MH rechargeable battery or replace the battery with another one. ( P. 6, 7, 13) • If you use the setting for transmitting sound in high quality, switch to the setting with higher priority on connection. ( P. 10) Calls You cannot hear the other person • Make sure that the unit and the Bluetooth® enabled phone are turned on. • Check if the unit and the Bluetooth® enabled phone are connected. ( P. 8) • Check the audio settings of the Bluetooth® enabled phone. Switch the calling device to the unit if it is set to the Bluetooth® phone. ( P. 13) • If the volume of the other person's voice is too low, increase the volume of both the unit and the Bluetooth® enabled phone. 19 19 VQT5C48