Panasonic RP-BTGS10 RP-BTGS10-K Owner's Manual (English) - Page 6
Charging
View all Panasonic RP-BTGS10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Charging The rechargeable battery is not charged initially. Charge the battery before using the headset. 1 Place the rechargeable battery in the USB charger • The battery can be charged in AAA rechargeable either the right or left slot of the battery (supplied) USB charger. • Make sure to align the battery terminals ( , ) correctly as marked in the USB charger. USB charger (supplied) * Use the USB charger as shown in the figure, without lifting up the terminal section. 2 Connect the USB charger to a computer with a USB connector • The charging light will blink when charging is in progress. It will remain on when the battery is fully charged. USB connector Charging light Computer USB port 3 When charging is completed, unplug the USB connector from the computer, and remove the battery from the USB charger ■ Note on the USB charger • Commercially available dry cell batteries cannot be charged. ■ Note on batteries VQT5C48 • Fully recharging a single drained rechargeable battery will take approximately 1 hour to recharge. • Recharge the supplied or optional rechargeable battery using the supplied USB charger. 6 • Rechargeable batteries that are not fully recharged may be used. 6