Panasonic SA-C600 Owners Manual - Page 105
Firmware update is available, stands for a number., Load Fail, No Device, No Disc, No Network
View all Panasonic SA-C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Fail ••Network connection is not complete. Try the setting again. (⇒ 26) Firmware update is available ••The firmware (free of charge) for this unit is available. Press [OK]. Press [ ], [ ] to select "Yes" and then press [OK]. ••The progress is displayed as "Updating %" while updating. (" " stands for a number.) ••Do not disconnect the AC power supply cord or turn this unit to standby while updating. (⇒ 93) ••When the update has finished successfully, "Success" is displayed. Press [ ] to turn this unit off and on. ••For the update information, refer to the following website. www.technics.com/support/firmware/ "F " (" " stands for a number.) ••An abnormality has occurred. (If this unit detects an abnormality, the protection circuit is activated, and the power may be turned off automatically.) Is this unit placed in an extremely hot place? Wait a few seconds and then turn the unit on again. (The protection circuit will be deactivated.) If the problem persists, write down the displayed number, disconnect the AC power supply cord and consult your dealer. Load Fail ••The firmware cannot be found on the USB flash memory. ••Download the latest firmware on the USB flash memory and try again. (⇒ 94) No Device ••No USB device is connected. ••Connect the USB device to be played. (⇒ 46) ••The connected USB device is not supported. ••The format of the file on the USB device is not supported. For supported formats, refer to "File format". (⇒ 116) No Disc ••No CD is inserted. ••Insert the disc to be played (⇒ 36). No Network Available ••This unit is not connected to the network. ••Check the network connection. (⇒ 26) No Play ••The disc cannot be played back. ••Insert the disc to be played (⇒ 107). 105 (Continued)