Panasonic SA-C600 Owners Manual - Page 19
Using the remote control, Remote control mode
View all Panasonic SA-C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Using the remote control 2 1 R03/LR03, AAA (Alkaline or manganese batteries) Note ••Insert the battery so the terminals ( and ) match those in the remote control. ••Point it at the remote control signal sensor on this unit. (⇒ 14) ••Keep the batteries out of reach of children to prevent swallowing. Remote control mode When other equipment responds to the supplied remote control, change the remote control mode. ••The factory default is "Mode 1". 1 Press [SETUP]. 2 Press [ ], [ ] to select "Remote Control" and then press [OK]. ••The current remote control mode of this unit is displayed. 3 When "Set Mode 1/2" is displayed, change the remote control mode of the remote control. To set "Mode 1": Press and hold [OK] and [1] for at least 4 seconds. To set "Mode 2": Press and hold [OK] and [2] for at least 4 seconds. 4 Point the remote control at this unit, and press and hold [OK] for at least 4 seconds. ••When the remote control mode is changed, the new mode will appear on the display for a few seconds. 19 (Continued)