Panasonic SA-XR50S SAXR50 User Guide - Page 10

Step 3 Settings Multi control basic setup settings MULTI CONTROL Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment's instructions. ^ POWER 8 Switch on. ^ POWER 8 SPEAKERS A B 6.1CH DECODING VCR 2 VIDEO IN L AUDIO IN R Display MULTI CONTROL INPUT SELECTOR PUSH ENTER VOLUME DOWN UP PHONES MULTI CONTROL INPUT SELECTOR PUSH ENTER Step 3 1 Enter Multi control mode. MULTI CONTROL PUSH ENTER Main menu is displayed. (Multi control mode menus and factory settings á back cover) 2 Select "SETUP 1 (BASIC SETUP)". INPUT SELECTOR INPUT SELECTOR Switching Entering SETUP 1 3 Change the settings. • To cancel MULTI CONTROL PUSH ENTER To finish settings 1. Press [MULTI CONTROL] several times to select "EXIT". 2. Press [INPUT SELECTOR]. EXIT 10 RQT7487 SPEAKERS Sets the speaker combination connected to this unit. SUBW: Subwoofer L R: Front L/R C: Center S: Surround SB: Surround Back For the subwoofer (SUBW), select YES if you have connected one, or NO if you have not. LCR S SB: All speakers connected L_R S SB: No center speaker LCR S __: No surround back speaker L_R S __: No center and surround back speaker LCR _ __: No surround speaker L_R _ __: Only front speaker D-INPUT (Digital input) Change these settings to suit the connections you have made to the optical (OPT) and coaxial (COAX) digital input terminals, so that the correct source is selected when you turn [INPUT SELECTOR]. 1. Select. INPUT SELECTOR INPUT SELECTOR SPEAKERS 1. Select. INPUT SELECTOR INPUT SELECTOR D- INPUT IN MODE (Input mode) This unit automatically detects whether input is digital or analog, but you can fix the input mode. AUTO: Automatically detects the input signal and plays ANALOG: Fixes the input signal to analog and plays DIGITAL: Fixes the input signal to digital and plays PCM FIX: Fixes the input signal to PCM and plays 1. Select. INPUT SELECTOR INPUT SELECTOR IN MODE Note regarding PCM FIX mode In rare cases, the unit may have trouble recognizing the digital signals on discs. With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the PCM FIX mode if this occurs. When PCM FIX mode is on, the unit cannot process other signals. This may cause noise to be output. Select another mode in this case. The PCM FIX mode remains as set even if the power is turned off.