Panasonic SDRS15 SDRS15 User Guide - Page 25
Select settings from the, menus. P.26, Quick starts
View all Panasonic SDRS15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Rotate the mode dial to motion picture recording/playback, still picture recording/playback or power OFF. Quick starts Quick starts are available when the mode is set to [ ] and [ ]. When [QUICK START] is [ON], the unit responds as follows to LCD monitor operations: LCD monitor operation Unit response Status indicator When opened Shooting can start in approx. 0.6 seconds. Lit red When closed The unit goes on quick start standbyˎ. Flashing green ˎ The unit consumes about half as much power as when recording is stopped. Setting [QUICK START] Select settings from the menus. (P.26) →[SETUP]→ [QUICK START]→[ON] (To turn OFF, select [OFF].) • [QUICK START] is [ON] at the time of purchase. ●The quick start standby is canceled and power shuts OFF (status indicator out) in the following situations. • When quick start standby mode continues for more than about 5 minutes • When the mode dial is rotated ●When the white balance has been set to the automatic adjustment (during automatic recording or when it is set to [ ] during manual recording) and quick start has been initiated, quick start may take longer if a different light source is used from the one prior to initiating quick start: This happens because the automatic adjustments are performed again. ●Starting may require more time than usual if the unit is impacted. ●Zoom magnification becomes 1x after quick starts. ●If [ECONOMY] (P.92) is set to [5 MINUTES] and the unit automatically goes on quick start standby, close and reopen the LCD monitor. LSQT1426 25