Panasonic SL-1200MK2PK Operating Instructions - Page 11

Troubleshooting guide Before requesting service, make the below checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem: In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or the website (http://www.panasonic.com). In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505, or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you. Problem No power. Probable cause(s) Is the AC power supply cord plugged in? Suggested remedy Plug the cord in firmly. Reference page(s) 5 There is power but no sound. Are connections to the amplifier/receiver's Connect the stereo pin cables to the amplifier's Sound is weak. PHONO terminals correct? PHONO terminals. 5 Left and right sounds are re- Are the stereo connection cable connections Double check all connections. versed. to the amplifier or receiver reversed? 5 Humming heard during play. Are there other appliances or their AC power Separate the appliances and their AC power supply cords near the stereo connection supply cords from this unit. cable? Is the earth lead connected? Make sure the earth lead is correctly connected. 5 Specifications Turntable section Type Quartz direct drive Manual turntable Drive method Direct drive Motor Brushless DC motor Turntable platter Aluminum diecast Diameter 33.2 cm (13-5/64") Mass 1.7 kg (3.74 lb.) Turntable speeds 33 1/3 r/min, 45 r/min Variable range pitch ±8 % Starting torque 1.5 kg·cm (1.3 lb·in) Build-up characteristics 0.7 s. from standstill to 33 1/3 r/min Braking system Electronic brake Wow and flutter 0.01 % WRMS\ 0.025 % WRMS (JIS C5521) ±0.035 % peak (IEC 98A Weighted) Rumble -56 dB (IEC 98A Unweighted) -78 dB (IEC 98A Weighted) \This rating refers to turntable assembly alone, excluding effects of record, cartridge or tonearm, but including platter. Measured by obtaining signal from built-in frequency generator of motor assembly. Tonearm section Type Universal Effective length 230 mm (9-1/16") Arm height adjustment range 0 - 6 mm Overhang 15 mm (19/32") Effective mass 12 g (without cartridge) Offset angle 22° Friction Less than 7 mg (lateral, vertical) Tracking error angle Within 2° 32' (at the outer groove of 30 cm (12") record) Within 0° 32' (at the inner groove of 30 cm (12") record) Stylus pressure adjustment range 0 - 4 g Applicable cartridge weight range 3.5 - 13 g 11 - 20.5 g (including headshell) (with auxiliary weight) 9.5 - 13 g 17 - 20.5 g (including headshell) (with shell weight) 3.5 - 6.5 g 11 - 14 g (including headshell) Headshell weight 7.5 g General Power supply Power consumption Dimensions (W×H×D) Mass AC 120 V, 60 Hz 13.5 W 45.3 × 17.2 × 35.5 cm (17-27/32" × 6-25/32" × 13-31/32") 12 kg (26.4 Ib) Specifications are subject to change without notice. Mass and dimensions are approximate. 11 RQT7018