Panasonic TH-58PZ800 58" Plasma Tv - Page 39

Programming the Remote to Operate Peripheral Equipment Using Timer Programming the Remote to Operate Peripheral Equipment You can operate other manufacturers' equipment using this TV's remote control. 1 Connect the external equipment to the TV and Power Off the external equipment 2 + 3 4 Press both buttons simultaneously for more than 3 seconds. •Release the buttons when the equipment selection buttons start flashing. Select the equipment with the equipment selection button •The selected button remains lit (other buttons are not lit). Input the equipment's 4-digit remote control code (p. 43-44) Advanced 5 Operate the equipment with the remote control (p. 42) •The external equipment turns On. ■Press to return to the TV mode ■If the equipment does not operate with the •remote control When your equipment has a single code • Input the remote control code again When your equipment has multiple codes Change the code with above and test again Caution •Registration will fail if the wrong code is input or it takes more than 30 seconds to register. To find a code not listed in the code list This procedure searches all codes and is called the "sequence method." After step above, change the code and test When the correct code is found store change Operate the equipment with the remote control (p. 42) •• Repeat until the code is found It may take many attempts before the correct code is found 39