Panasonic WJHD220 WJHD220 User Guide - Page 26

Set 00:00 for the start time of the initial event of the next day. • A combination camera will move to the preset position if an alarm arises and the position has been assigned beforehand in TRIGGER ACTION SETUP of the REC SETUP menu. 4. Press the JogDial while the cursor is on SETO to open the event programming menu. G Recording Mode Setup (PROG1-4 SETUP, NO. 1-4) PROG1 NO.1 SETUP REC MODE SF-24H REC RATE 30FPS REC QUALITY SUPER FINE ALM REC MODE SF-24H REC RATE 30FPS REC QUALITY SUPER FINE PRE ALM REC 0S POST ALM REC 10S DYNAMIC REC OFF TRIGGER ACTION SETUPO CAM REC SETUPO Parameters for internal timer recording are assigned to each event (NO. 1-4) of the program (PROG 1-4) in this menu. There are five recording modes available: super fine (SF), fine (FQ), normal (NQ), long-time (EX) and optional (SP). If combined with audio recording (-A), the number of recording modes doubles. The remaining recording time (shown as xx in the list below) is determined by the selected recording mode (10 options) and resolution (2 options) in the SYSTEM SETUP menu. In the SP mode, the field rate and picture quality are variable and can be selected at option in the range of 0.1 to 30 FPS with five quality level options respectively. After the recording mode is selected, the available recording time is determined and displayed. Rec Mode Quality SF-xxxH Super Fine FQ-xxxH Fine NQ-xxxH Normal EX-xxxH Long time SF-AxxxH Super Fine FQ-AxxxH Fine NQ-AxxxH Normal EX-AxxxH Long time SP-AxxxH Optional setup SP-xxxH Optional setup Audio Record Note N/A N/A N/A N/A Available Available Available Available Available Field rate, quality selected optionally Field rate, quality N/A selected optionally Notes: • By selecting a recording time, the recording rate (REC RATE) and the recording quality (REC QUALITY) will be automatically calculated and displayed. For details, refer to the provided booklet "REC MODE TABLES for WJ-HD220". 26 • Even if preset to 30 or 15 FPS, the actual recording rate may drop to 7.5 FPS at worst while busy multi tasks such as playback, remote-access playback, remoteaccess live image, FTP access, multi-split display, or video motion detection are carried out simultaneously. The status display will indicate "*PLAY" while playing back the images recorded with a rate different from the preset. • Suffix "xxx" following "SP-" is specified in REC MODE TABLE in the ADDENDUM attached to the manual. 1. Move the cursor to MODE, and press the JogDial. The mode area will be highlighted. 2. Select a recording mode using the JogDial, and press the Jogdial. Audio data will be recorded when a mode with hyphen A is selected. Available recording mode: SF, FQ, NQ, EX, SP, SF-A, FQ-A, NQ-A, EX-A, and SP-A 3. When SP or SP-A is selected, specify a recording rate (REC RATE) using the JogDial, and press the JogDial. Available recording rates: From 0.1 to 30 FPS 4. When SP or SP-A is selected, specify a recording quality (REC QUALITY) using the JogDial, and press the JogDial. Available recording qualities: SUPER FINE, FINE, NORMAL, EXTENDED G Alarm Recording Mode Setup (ALM REC MODE) Alarm events arising within the time zone specified by the program will start recording with the preset parameters. Refer to "PROG NO. SETUP" described above in this menu for operating procedures and available parameters, since they are very similar. G Pre-alarm Recording (PRE ALM REC) Picture recording will start prior to the alarm activation at the time specified by this setting. 1. Move the cursor to PRE ALARM REC with the [D] or [C] button. 2. Select the desired pre-recording time with the JogDial, and press the JogDial. The default is 0S. Available times (seconds): 0S, 1S, 2S, 3S, 4S, and 5S