Panasonic WVCU550CJ WVCU550CJ User Guide - Page 10

SYSTEM INFORMATION Please note that the following functions were added to improve the operation of the combination cameras. ■ Additions ● Selection of Pan/Tilt Speed The Pan/Tilt speed can be changed by selecting a mode in the menu (A1) displayed on the LCD display of the controller. 1. Select the desired monitor and camera. Camera cc A1 Monitor mm SLW FST ■ Version Information ● WJ-SX550 Series Matrix Switcher The onscreen display indicates the version in "Cold Start" or "Normal Start" during the power up procedure. Matrix Switcher Model WJ-SX550C "Normal Start" CPU Board SW. Unit No. Video Character Type VD/VS Position 01 NTSC 1 VS F1 F2 F3 F4 2. Select a mode by pressing the F3 or F4 button. "❑" indicates the currently selected mode. SLW: Moves the Pan/Tilt Head at lower speed. FST: Moves the Pan/Tilt Head at higher speed. 3. Move the Joystick to move the Pan/Tilt Head in the desired direction. Note: Changing the Pan/Tilt speed by pressing the STOP/SLOW button is enabled only when FST mode is selected. The above function is available in a system that includes the following equipment: WJ-SX550 Series WV-PB5548 Matrix Switcher CPU Ver. 6.00 or later Control Ver. 6.00 or later Data Board Ver. 6.00 or later ROM Ver. CPU Control Alarm Output RS-485 No.1 No.1 No.1 X.XX X.XX X.XX X.XX X.XX Note: x.xx is a version number. 10